Trade order
Quick Cart
Fast add by SKU, category, or search.
Searches within the selected category.
Selected product
Search or choose a category to preview a product.
Sort:
Catalogue index — 1139 products A–Z by SKU
- 002-492-222 — HRZ-2e, 2 zone Non-Addressable fire alarm control panel. 2 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W xD)
- 002-492-242 — HRZ-4e, 4 zone Non-Addressable fire alarm control panel. 4 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W x D)
- 002-492-282 — HRZ-8e, 8 zone Non-Addressable fire alarm control panel. 8 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W x D)
- 02-WT-01 — 25 mm Red ABS Self Draining Water Trap
- 020-050-E — ASD ENCL IP66 VESDA-E
- 020-052 — 19” Rack enclosure (2 rows)
- 020-055 — 19” Rack enclosure (5 rows)
- 020-417 — Active end of line monitor module
- 020-600-002 — Bezel kit for Active or Passive repeaters. Semi-flush mounting, 218 x 307 mm (H x W)
- 020-713 — Fire & fault relay module for NFS2-8
- 020-743 — Capacitor kit for detectors not compatible with capacitive EOL monitoring. Includes 8 x 10µƒ capacitors. Active EOL's required - See part number 020-417
- 020-745-008 — Spare installation kit. Includes 8 capacitive end of lines, battery leads, Allen key, panel controls key and sounder end of line resistors
- 020-747 — 8-way input / output card. Provides up to 8 configurable relay outputs or up to 4 command inputs and 4 outputs
- 020-772 — 4-way sounder output module (1.5A Max)
- 020-773 — Routing Termination Unit 1 (RTU01). Use on the Fault Routing output on the 795-132 to allow full monitoring of the transmission path to transmission device. Allows compliance with EN54-2 OWR 8.9
- 020-820 — Replacement printer paper roll
- 020-825 — Lock and key for ZX series control panels
- 020-835 — Spare key switch and keys (901) for Morley repeaters 709-601-001
- 020-865 — Spare red controls key - Pack of 10
- 020-891 — Morley-IAS USB Upload/Download Lead. The lead provides the interface between a PC and any Morley-IAS fire alarm control panel
- 04390-31 — Magnet Door Holder 24V DC 22mA
- 04390-41 — Magnet Door Holder Floor Mounted 24V DC 45mA
- 04390-55 — Magnet Door Holder 240V AC 17.5mA
- 04390-92 — Door Holder Floor Plate
- 04390-99 — Door Plate Assembly (Spare)
- 059-001 — Flush Sample Point Kit - 2m flexible 10mm tube, T piece and Head
- 059-001-W — Flush Sample Point Kit - 2m flexible 10mm tube, T piece and Head(White)
- 059-007 — Conical Sample Kit - 2m flexible 10mm tube, T piece and head
- 059-007-W — Conical Sample Kit - 2m flexible 10mm tube, T piece and head(White)
- 128-014-XTR — Label - Sampling Point
- 128-015 — Label - Smoke Detector Pipe
- 13270-02LB — 2 Zone conventional panel, EN54 less batteries
- 13270-04LB — Gent 4 Zone conventional panel, EN54 less batteries
- 13270-08LB — Gent 8 Zone conventional panel, EN54 less batteries
- 13270-29 — Flush Plate for 1-8 Panel and Repeat Panel Variants
- 13271-08LB — 8 Zone repeat indicator, less batteries
- 13449-01 — Remote LED (for use with common base S4-700)
- 14111-99 — MCP 1106(1102) Glass Pack
- 14112-09EN — Spare Square Glasses Pack of 10 - EN54 Pt11 Version
- 14112-10 — Pack Of 10 Plastic Test Keys for 34800-EN and 14112-08 MCP
- 14115-KEY — Spare Bulgin key for 14115-08 key operated (pack of 10)
- 144-013 — Conical Sample Point Head only (for 10 mm OD tube)
- 19100-02 — High Profile Enclosure with DIN rail 125x125x100mm.
- 19104-52 — Relay 24V DC Base & Diode
- 19106-02 — Timer Octal Base 2-32 Secs. DOE 24V DC C/W Base
- 19107-52 — 24Vdc DPCO Relay c/w High Profile Enclosure
- 2020B — Standard detector mounting base for Vision detectors
- 2020BSD — Detector mounting base fitted with schottky diode. For Vision detectors
- 2020DBSD — DEEP BASE SCHOT DIODE VISION S
- 2020F — Fixed temperature thermal A2S (58°C) conventional detector
- 2020HF — High fixed temperature thermal BS (78°C) conventional detector
- 2020P — Optical conventional detector
- 2020PT — Optical thermal multi criteria conventional detector
- 2020R — Rate of rise thermal A1R (58°C) conventional detector
- 22051E-26 — Low profile Optical Smoke Sensor, no Isolator - White. Requires B501AP base
- 22051E-RF-26 — Agile Photo Detector. Wireless optical smoke detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 22051EI-26 — Low profile OpticalSmoke Sensor c/w Isolator - White. Requires B501AP base
- 22051TE-26 — Multi-sensor combined optical smoke sensor and thermal sensor in a single housing, no Isolator - White, Requires B501AP base
- 22051TEI-26 — Multi-sensor combined optical smoke sensor and thermal sensor c/w Isolator in a single housing, - White, Requires B501AP base
- 22051TLE-26 — Smoke/Thermal/IR Sensor, no Isolator - White
- 22051TLE-RF-26 — Agile Photo-Thermal-IR Detector. Wireless Optical, Thermal & Infra-Red detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 22051TLEI-26 — Smoke/Thermal/IR Sensor c/w Isolator - White
- 221-035 — 10mm Red Capillary Pipe 100m reel - RED
- 221-036 — 10mm Red Capillary Pipe 100m reel - Clear
- 2211-129 — EN 54 Loop Vigilon EN and Compact
- 2211-130 — BS Loop -Vigilon V3+ and 3400
- 2211-132 — Vigilon EN Panels and Nodes
- 2211-133 — Vigilon BS Panels and Nodes
- 2211-139 — EN 54 Network - Vigilon EN and Compact
- 2211-140 — BS Network Vigilon V3+ and 3400
- 2211-143 — 8 Line LCD (Current Display) since March 2005
- 2211-144 — 8 Line LCD (Current Display) since March 2005
- 2211-150 — 16 line display
- 2211-152 — 8 Line Display (current)
- 2211-155 — 16 line display (no zonal indicators)
- 2211-180 — 8 Line zonal display (current) since 2003
- 2211-187 — HIGH POWERED EN54 LOOP VIG EN AND COM
- 2211-191-4 — Software V4 for PGM VIGPLUS-MCC
- 2211-192-4 — Software V4 for PGM COMPACT
- 2211-200 — Software V3 for PGM VIGPLUS-NC-HYBRID
- 222-059 — 10mm OD Clear DISCRETE END CAP PK10
- 2250-025 — Epsilon
- 2351E A — Low profile Non-Addressable optical smoke detector compatible with the D2E duct detector. For accessories please see Morley Addressable devices.
- 251-001 — Test Wire 100m
- 251-002 — Test Matches 12Pk
- 251-003 — Smoke pellets (8 tablets)
- 34701 — T Breaker Unit
- 4015-501-YFR — Power Sonic Battery 7Ah - 12V Flame Retardant Used in VIG & Sentri Repeat, Nano & Sentri1 panels
- 4015-502-YFR — Power Sonic Battery 2.3Ah - 12V Flame Retardant Used in Xenex 2&4 Zone panels, FP595 2&4 zone, S4-34440-02 & 78302-02NM MPI's
- 4015-504-YFR — Power Sonic Battery 17Ah - 12V Flame Retardant
- 4015-509-YFR — Power Sonic Battery 3.4Ah - 12V Flame Retardant Used in Xenex 8 zone & FP595 8 zone panels
- 4015-514-YFR — Power Sonic Battery 12Ah - 12V Flame Retardant Used in Vigilon Compact, Sentri2 & S4-34440-12 MPI
- 4015-517-YFR — Power Sonic Battery 1.2Ah - 12V Flame Retardant
- 4015-602-YFR — Power Sonic Battery 21Ah - 12V Flame Retardant Used in Vigilon & Sentri4 panels
- 4015-603-YFR — Power Sonic Battery 7Ah - 6V Flame Retardant Used in Vigilon and Sentri zonal mimics
- 4015-604-YFR — Power Sonic Battery 14Ah - 12V Flame Retardant Used in S4-34440-ASD FAAST Interface
- 5000.00.003 — MA-2000-XX & MA-8000-XX User terminal board
- 5000.00.005 — MA-2000-XX & MA-8000-XX Flat Ribbon Cable Kit
- 5000.00.006 — Max Battery Cables & temperature probe
- 5000.00.007 — MA-2000-XX PSU - Power Supply unit
- 5000.00.008 — MA-8000-XX PSU - Power Supply unit
- 5000.00.010 — MA-2000-01 Main conrtol board including display LCD - Region 1
- 5000.00.012 — MA-2000-03 Main conrtol board including display LCD - Region 3
- 5000.00.013 — MA-8000-01 Main conrtol board including display LCD - Region 1
- 5000.00.015 — MA-8000-03 Main conrtol board including display LCD - Region 3
- 5000.00.016 — MA-8000-XX 3U Front battery Cover/Blank
- 5000.00.017 — MA-2000-XX & MA-8000-XX Front Door including screws. Ex PBC
- 5000.00.019 — MA-1000-XX User terminal board
- 5000.00.021 — MA-1000-XX PSU - Power Supply unit
- 5000.00.022 — MA-1000-01 Main conrtol board including display LCD - Region 1
- 5000.00.024 — MA-1000-03 Main conrtol board including display LCD - Region 3
- 5000.00.025 — MA-1000-XX Flat Ribbon Cable Kit
- 5000.00.026 — MA-1000-XX Front Door including screws. Ex PBC
- 52051E-26 — Heat sensor. 58 °C, no Isolator - White. Type A1R. Requires B501AP, base
- 52051E-RF — Agile 58°C Fixed Temperature Heat Detector. Wireless fixed temperature (58°c) heat detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 52051EI-26 — Heat sensor. 58 °C and Rate of Rise c/w Isolator - White. Type A1R. Requires B501AP base
- 52051HTE-26 — Heat high temperature sensor, 78 °C, no Isolator - White. Type BS. Requires B501AP base
- 52051RE-26 — Heat sensor. 58 °C and Rate of Rise, no Isolator - White. Type A1R. Requires B501AP base
- 52051RE-RF — Agile Rate of Rise Heat Detector. Wireless 'Rate of Rise' heat detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 580248.11 — Power amplifier 4 x 300 W / 100 V, Class D, 24 V DC
- 580249.11 — Power amplifier 4 x 500 W / 100 V, Class D, 24 V DC
- 581730 — 12 V 105 Ah battery for VA/PA emergency PSU (must be used in pairs)
- 581730.PS — POWERSONIC PGFT-12V105-FR BATTERY
- 581731 — 12 V 150 Ah battery for VA/PA emergency PSU (must be used in pairs)
- 581731.PS — POWERSONIC PGFT-12V160-FR BATTERY
- 581732 — 12 V 65 Ah battery for VA/PA emergency PSU (must be used in pairs)
- 581732.PS — POWERSONIC PS-12650 - FR BATTERY
- 582401 — 6 watt IP 55 rated ceiling speaker (6.5") c/w metal rear cover BS EN 54-24
- 582407.FD — Metal rear cover for 582407.SAFE BS EN 54-24
- 582407.SAFE — 6 watt ceiling speaker for shallow ceiling voids (5") BS EN 54-24
- 582408.FD — Metal rear cover for 582408.SAFE BS EN 54-24
- 582408.SAFE — 6 watt ceiling speaker for shallow ceiling voids (6.5") BS EN 54-24
- 582423 — 10 watt surface mounted round loudspeaker BS EN 54-24
- 582425 — 6 watt flush mounted wall loudspeaker (6.5") BS EN 54-24
- 582426 — 6 watt IP 54 rated ABS wall mounted cabinet speaker (6.5") BS EN 54-24
- 582432 — 30 watt horn loudspeaker BS EN 54-24
- 582433 — 30 watt music horn loudspeaker BS EN 54-24
- 582451 — IC Audio TS-C 20-500/T-EN54 20 watt column speaker BS EN 54-24
- 582452 — IC Audio TS-C 30-700/T-EN54 30 watt column speaker BS EN 54-24
- 582453 — IC Audio TS-C 50-1000/T-EN54 50 watt column speaker BS EN 54-24
- 582460 — 16watt EN54-24 approved Sound Spherwe
- 582470 — 6 watt wall mounted metal cabinet loudspeaker (4”) BS EN 54-24
- 582473 — 10 watt uni-directional sound projector BS EN 54-24
- 582474 — 20 watt uni-directional sound projector BS EN 54-24
- 582475 — 20 watt bi-directional sound projector BS EN 54-24
- 582476 — 20 watt column loudspeaker BS EN 54-24
- 582477 — 40 watt column loudspeaker BS EN 54-24
- 582479 — 15 watt horn loudspeaker BS EN 54-24
- 582480 — 24 watt coaxial 2-Way ceiling loudspeaker c/w metal rear cover (6.5”) BS EN 54-24
- 583311 — Key Cover Flap KCF3
- 583318 — Clear plastic button covers (spares)
- 583361.22IPMSG — DOM4-8 - digital output module for up to 8 loudspeaker circuits
- 583362.22IPMSG — DOM4-24 - digital output module for up to 24 loudspeaker circuits
- 583381.31 — SCU - System communication unit
- 583496 — EOL - end of line module for all 100 V speaker circuits
- 583503.RE — DCSF12 - Fireman's emergency microphone (12 Buttons) with redundancy option
- 583504.RE — DCSF1 - Fireman's emergency microphone - single button with redundancy option
- 583506 — DKM18 - Fireman's emergency microphone extension module
- 583520 — DCS Plus - digital call station for routine and emergency paging with redundancy option
- 583526 — DKM Plus - 18 button digital key module for use with DCS Plus
- 583527 — ETCS - Ethernet touchscreen call station
- 584963 — Replacement lock cylinder for DCSF protective cabinet
- 585000 — INC w/o any optional modules
- 585000.31 — INC w/ DAL Module 8 DAL ports & 12 GPIOs
- 585000.32 — INC w/ DANTE Module 8X8 & 12 GPIOs
- 585000.33 — INC w/ Aud In/ Out Module & 12 GPIOs
- 585001 — Universal Inteface Module
- 585020 — 8 Speaker Line Module
- 585030 — 4 Ch 125W Class D Amp w/ Inbuilt Batt Ch
- 585031 — 4 Ch 250W Class D Amp w/ Inbuilt Batt Ch
- 585033 — 4 Ch 1200W Class D Amp w/ Power Sharing
- 585034 — 4 Ch 2000W Class D Amp w/ Power Sharing
- 585052 — Power Supply 1U - 24VDC/ 380A
- 585053 — Power Supply 2U - 24VDC/ 640A
- 585301 — 8 Channel amplifier output cable
- 585302 — 4 Channel amplifier output cable
- 585305 — Amplifier backup cable - 1 channel
- 585306 — Amplifier backup cable - 2 channel
- 6500-LRK — Long range reflector kit for 70-100m
- 6500-MMK — Multi Mount Kit for IR reflective beam. Provides ceiling and wall mount swivel brackets. Note: Requires 6500-SMK
- 6500-SMK — Surface Mount Kit for IR reflective beam detector. Allows direct surface cable entry
- 6500E-26 — Optical beam detector based on reflective technology. Supplied as a combined transmitter/receiver unit with a reflector. Suitable for distances from 10m to 70m. For Beam accessories please see 6500 range in the conventional section.
- 704952 — Yellow Fascia for key Switch MCP (for use with S4-34807)
- 704982 — Yellow Surface mount back box for key Switch MCP (for use with S4-34807)
- 709-601-001 — Morley-IAS Active Repeater. Silence, Mute, Reset, Accept, Evacuate and Test Controls. Requires 24 Vdc supply and a RS485 card when used with a ZX control panel. 165 x 254 x 50mm (H x W x D)
- 709-701-001 — Morley-IAS Passive Repeater. Requires 24 Vdc supply and a RS485 card when used with a ZX control panel. 165 x 254 x 50mm (H x W x D)
- 714-001-111 — DXc1 Single loop panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols. 260 x 390 x 147mm (H x W x D).
- 714-001-221 — DXc2 2 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).
- 714-001-241 — DXc4 4 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).
- 720-001-301 — ZX2Se 1-2 loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , not expandable
- 721-001-140 — ZX5Se 1-5 loop 140 Zone LED control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. supplied with 140 Zone led's
- 721-001-200 — ZX5Se 1-5 loop 200 Zone LED control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. supplied with 200 Zone LED's
- 721-001-301 — ZX5Se 1-5 loop control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , expandable to 40 or 80 with part numbers 795-077-020 or 795-077-060
- 721-002-301 — ZX5Se 1-5 loop control panel complete with Stainless Steel door and bezel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , expandable to 40 or 80 with part numbers 795-077-020 or 795-077-060
- 722-001-301 — ZX1Se single loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , not expandable
- 74333-50NM — Bell 240V Grey weather resistant
- 74430-88NM — Bell 24V Red
- 74431-66NM — Bell 12V Grey
- 74432-88NM — BELL 24V Red weather resistant
- 764744 — Z-System Zener barrier for intrinsically safe detectors
- 764746 — Z-System Zener barrier for AV device (Drives one sounder or two strobes)
- 77821-01NM — Commissioning Lead For Vigilon Panel
- 781550 — S-Quad Protective cage
- 781814 — Remote LED for ES Detect
- 789862.1 — Programming PC Interface for Wireless Transponder
- 795-004-001 — RS 485 Communication module
- 795-005 — RS 232 communication module
- 795-014 — 4-way, Programmable Output Relay Module, PCB only. Requires 24 Vdc supply and an RS485 card to be fitted in the control panel
- 795-015 — 4-way, Programmable Sounder Module, PCB only. Requires 24 Vdc supply and an RS485 card to be fitted in the control panel
- 795-016 — Sounder booster PSU. Enclosure comprising 24Vdc PSU/Charger and single sounder circuit controller. 500 x 500 x 180mm (H x W x D)
- 795-038-001 — Hi-485 communication module, PCB only. Requires an RS485 card to be fitted in the control panel
- 795-044-001 — ZXe Loop driver card for Nittan protocol
- 795-045 — RS485 to RS232 converter
- 795-048 — ZXe Loop driver card for Apollo Series 90 or XP95 protocol
- 795-051-001 — Internal Printer for use with ZX5Se panels.
- 795-057 — MODBUS interface module. Requires an RS485 card to be fitted in the control panel
- 795-058-005 — ZXe Loop driver card for Hochiki ESP protocol
- 795-058-105 — Loop driver card for Hochiki ESP protocol, 460mA
- 795-066 — ZXe Loop driver card for Apollo Discovery or XP95 protocol
- 795-066-100 — Loop driver card for Apollo Discovery or XP95 protocols, 460mA
- 795-068 — ZXe Loop driver card for System Sensor protocol
- 795-068-100 — Loop driver card for ZX panels, System Sensor protocol, 460mA
- 795-072 — ZXe Loop driver card for Morley protocol
- 795-077-020 — 20 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 40
- 795-077-060 — 60 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 80
- 795-083 — Keyswitch kit. Keyswitch and 2x keys to mount into DX series control panels. Used for Level 2 access, class change and control of functions
- 795-084 — Spare keys for 795-083 - Pack of 5
- 795-097 — DXc Software programming kit (SPK) supports System Sensor, Apollo and Hochiki protocols
- 795-099 — Kit DXc Network Card, In order to connect panels together to create a network a DXc Network card must be fitted to each panel
- 795-101 — DXc Extension Box Cover Blank For Extension Box
- 795-102 — 40 Zone LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door
- 795-103 — DXc Extension cover, comes with 80 zone LED card
- 795-104 — DXc replacement door for DXc control panels. The spare door fits all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, facia label, ribbon cable and lock.
- 795-106 — DXc1 Spare Power supply unit (PSU) for 1 loop panel
- 795-107 — DXc2/4 Spare Power supply unit (PSU) 2/4 loop panel
- 795-108-001 — DXc replacement text inserts, pack includes all text inserts/slide-in labels including both blank and numbered labels for Zone LEDs. Pack also includes the User Reference Guide and the Quick Start Manual
- 795-109-001 — DXc 1 loop base card - Apollo, System Sensor and Hochiki protocols
- 795-110-001 — DXc 2 loop base card - Apollo, System Sensor and Hochiki protocols
- 795-110-002 — DXc 2 loop base card - Morley Protocol
- 795-111 — DXc 2 Loop Expansion Card for use with the DXc4 only
- 795-112 — Flush bezel kit for DXc1 (small enclosure)
- 795-113 — Flush bezel kit for DXc 2/4 (medium enclosure)
- 795-114 — Flush bezel kit for DXc 1 with the extension backbox fitted (small enclosure)
- 795-115 — Flush bezel kit for DXc 2/4 with the extension backbox fitted (medium enclosure)
- 795-116 — The custom key plate cover is supplied with a painted metal plate. The metal plate can be removed and drilled to accept key switches or indicators and labelled accordingly by the installer. The custom key plate cover can be used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension backbox, part No. 795-121
- 795-118 — DXc key switch kit, Control panels can be fitted with an optional key switch kit fitted by removing the existing label and replacing with a new label supplied with the kit. The flying lead (fitted with a plug) pushes on to the two pins situated at the bottom of the main display PCB
- 795-120 — Rack Mount Bracket for DXc2/4
- 795-121 — DXc extension Box increases the enclosure size of a DXc1, DXc2, or DXc4 control panel to accommodate larger batteries, relays or other equipment by fitting the extension back box, 263 x 390 x 147 (H x W x D).This Extension Box is supplied without covers. Two covers must be used with the box. Any combination of the three listed below can be used: 795-101, 795-103, 795-116
- 795-122 — DXc RS232 Card allows the connection of a serial device to the panel such as BMS system or our Visuleyez product range
- 795-124 — 80 ZONE LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door
- 795-132 — For use with DXc1-M (714-001-214) & DXc2-M (714-001-224) only. I/O card for EN54-13 compliant sounder circuits, Fire Routing interface, Fault Routing interface and Fire Protection interface. Routing Termination units may be required depending on application. Allows compliance with EN54-2 OWR 7.9.1 and 7.9.2, OWR 7.10, OWR 8.9
- 795-136 — ZX1/2SE Back Box. Includes the metal work only
- 795-137 — ZX5SE Back Box. Metal work only
- 795-141 — ZX1/2SE Door. Metal work only
- 795-142 — ZX5SE Door. Metal work only
- 796-017 — Printer paper roll and printer ribbon forZXe/ZXSe internal printer. (795-051-001)
- 796-042 — Thermal printer paper roll for ZX External printer 795-060-002
- 796-045 — Micro processor pcb (CPU) for ZX series control panels. Supplied without software
- 796-162 — 5 loop base PCB for ZX5e/ZX5Se
- 796-170 — 2 loop base card for ZX2Se
- 796-171 — Single loop base PCB for ZX1Se
- 796-175 — ZX1/2Se retrofit PSU kit including chassis
- 796-176 — ZX5Se retrofit PSU kit including chassis
- 796-177 — 2 Amp PSU for post-Jan 2010 ZX1Se/2Se. PSU only this part does not come with chassis plate
- 796-178 — Spare PSU for ZX5Se post-Jan 2010. PSU only this part does not come with chassis plate
- 796-180 — Retrofit PSU & base card PCB kit
- 796-181 — ZX5Se Retrofit 4 line display including display plate and overlay
- 796-183 — ZX1/2Se Retrofit 4 line display kit including display plate and overlay
- 796-184 — ZX2Se retrofit PSU & base card PCB kit
- 796-706 — ZX Series V7.06 replacement software (set of two EPROMS)
- 796-845 — ZX Series V8.45 replacement software (set of two EPROMS)
- 796-855 — ZX Series V8.55 replacement software (set of two EPROMS)
- 796-860 — ZX Series V8.60 replacement software (set of two EPROMS)
- 797-021 — Spare key for ZX series control panels. Quantity 1
- 797-061 — ZX1(S)e/ZX2(S)e Bezel kit. Semi-flush mounting kit for ZX1(S)e or ZX2(S)e control panel. Bezel dimensions 450 x 450 mm (H x W)
- 797-062 — ZX5Se Bezel kit. Semi-flush mounting kit for ZX5(S)e control panel. Bezel dimensions 550 x 550mm (H x W)
- 797-063 — ZX1SE and ZX2Se Glass Door Kit, comprises a new inner door and plexiglass window allowing controls to protected and recessed within the existing enclosure
- 797-064 — ZX5Se Glass Door Kit, comprises a new inner door and plexiglass window allowing controls to protected and recessed within the existing enclosure
- 797-065 — Multi-Mount Enclosure. Metal, Morley light grey
- 797-076 — L' shaped mounting bracket to fit peripheral PCB's into Zxe/ZX5e/ZXSe
- 797-077 — ZX1(S)e & 2(S)e Battery box or mounting enclosure. Size 400 x 400 x 135mm (H x W x D)
- 797-078 — ZX5(S)e Battery box or mounting enclosure. Size 500 x 500 x 185mm (H x W x D)
- 797-090 — DXc Extension EN54-4 compliant PSU backbox increases the enclosure size of a DXc2, or DXc4 control panel to accommodate an additional pair of 17Ah batteries to provide increased system battery standby of up to 34Ah at 24V(depending o the batteries fitted in the panel) . This unit is supplied with the backbox, two cover blanks and an additional power supply unit (PSU). 263 x 390 x 147 (H x W x D)
- 800171 — Fixed Heat Detector
- 800177 — Fixed Heat Detector Class B
- 800271 — Rate of Rise Heat Detector
- 800371 — Optical Smoke Detector
- 801607 — 3-Ways Ball Valve or Manual Blow Through Valve Set Complete
- 803-MCP-KIT — Wireless Manual Call Point including MCP and Wireless Interface
- 803271 — Heat Sensor Rate Of Rise
- 803271.EX — Intrinsically Safe Heat Detector (Rate of Rise) - Please use base 805590.
- 803371 — Optical Sensor (Compatible device with radio base)
- 803371.EX — Intrinsically Safe Optical Smoke Detector - Please use base 805590.
- 803374 — Dual Optical Heat Smoke sensor
- 803374.EX — Intrinsically Safe Dual Angle Optical Heat Detector - Please use base 805590.
- 805576 — S-Quad Base Label Plate (pack of 10)
- 805580 — S-Quad Removal Tool Kit
- 805589ST — Dust cover to support S4, S4T and S4M device mouldings. Pack of 50
- 805590 — Detector Base. Can be used for ES Conventional and Intrinsically safe detection.
- 805590-D — Detector Base With Diode
- 805593.1 — Wireless Detector Base (EN54 pt 25)
- 805595.1 — Wireless Transceiver Interface for communicating with Wireless devices (EN54 pt 25)
- 805597 — Replacement Battery Pack for 805593 & 805601
- ALD-302 — Anti ligature base for the S Quad Sensor (Requires S4-700 base)
- B501AP — Analogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label. PURE WHITE
- B501RF — Agile Wireless Detector/Repeater Base. Base for Agile wireless detectors, repeater and sounder
- B501RF-RR — Agile Wireless Detector/Repeater Base. Base for Agile wireless sounders red
- B524IEFT-1 — Deep analogue sensor base with built in FET isolator, with SEMS screw connections and address identification label
- BEAMHK — Heater kit for reflective beam detector. Requires 24V supply
- BEAMHKR — Heater kit for beam reflector. Requires 24V supply
- BGL-PC-I00 — Red Flash, Pure White Body, Clear Lens, c/w Isolator. Loop-powered EN54-23 C Category - Detector Base Strobe. EN54-23 certified. Coverage volume code: C-3-8.5
- BPW — Addressable deep base for detector and AV. Pure White Body
- BRH-PC-I00 — Body Colour - White Flash - Red Lens - Clear Isolator - Yes High Performance Detector Base Sounder Strobe. Loop-powered EN54-23 C Category - EN54-23 certified. Coverage volume code: C-3-15 (High) / C-3-11 (Low) / C O-1-4 (Legacy).
- BRR — Addressable deep base for detector and AV. Red
- BRS-PC-I00 — Red Flash, Pure White Body, Clear Lens, c/w Isolator. Loop-powered EN54-23 C Category - Standard Performance Detector Base Sounder Strobe. EN54-23 certified. Coverage volume code: C-3-8.5 (Standard) / O-1-3 (Legacy)
- BSO-PP-I00 — Pure White Body c/w Isolator. Base Sounder - Addressable loop powered base sounder, EN54-3 approved.
- BSO-PP-N00 — Pure White Body no Isolator. Base Sounder - Addressable loop powered base sounder, EN54-3 approved.
- CCM2-GLOBAL — GSM Module
- CLSS-BC — CLSS Bar Codes, roll of 1000
- CMX-10RME — 10-way relay control (output) card (unboxed PCB.) contact rating 30 Vdc, 1 A. Complete with individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's
- COMPACT-FLUSH — Control Panel Flush Surround (supplied in Black)
- COMPACT-FLUSH-SS — Main Control Panel Stainless Steel Flush Mounting Kit
- COMPACT-LPC — Additional Loop card for COMPACT-24-N. Supports 3400, 34000 & Pre-VAD Squad devices.
- COMPACT-LPC-EN — Additional Loop card (2km) for COMPACT-24-N
- COMPACT-NC — Network Card for Vigilon Compact (EN Networks only)
- COMPACT-NODE — Compact Plus Terminal Node for Vigilon networks supplied in black. Batteries not included - requires 2 x 4015-514-YFR (Power Sonic Flame Retardant 12V 12Ah) to meet compliance regulations.
- COMPACT-PLUS — Vigilon Compact Plus 1-2 loop Control Panel c/w 1 loop card & supplied in black. Batteries not included - requires 2 x 4015-514-YFR (Power Sonic Flame Retardant 12V 12Ah) to meet compliance regulations.
- CR-6EA — six way changeover relay output with built-in loop isolation. Complete with rotary address switch and plug-in terminal blocks. Requires M200-SMB-MM for mounting
- CSR — Red low profile base, provides multiple cable entry points and a range of fixing centres, suitable for use with all commonly encountered fire cable sizes & ranges. Pack of 5
- CUP HWKIT — CUP. Cup for setup and maintenance of Agile wireless detectors. For use with telescopic pole (POLE HWKIT)
- CWR — Red Deep IP65 base, provides cable access for indoor surface & applications up to IP65, suitable for use with all commonly encountered fire cable sizes & ranges. Pack of 5
- CWSO-RR-S1 — Sounder Red & Low Profile Base
- CWSO-RR-W1 — Sounder Red IP65 & Deep Base
- CWSO-WW-S1 — Sounder White & Low Profile Base
- CWSS-RR-S5 — Sounder VAD-Red Base- Red Flash
- CWSS-RR-W5 — Sounder VAD-Red Base- Red Flash & IP65 Base
- CWSS-RW-S5 — Sounder VAD-Red Base- White Flash
- CWSS-RW-W5 — Sounder VAD-Red Base- White Flash & IP65 Base
- CWSS-WW-S5 — Sounder VAD-White Base- White Flash
- CWSS-WW-W5 — White body with cool white flash, IP65 deep base, EN54-Pt.3 and Pt.23 W-2.4-8.9 and C-3-10 / C-6-10 class approved sounder strobe with clear lens, provides omni directional wall and ceiling mounting, comes with soft start feature as standard and suitable for 12 and 24V systems. Deep base included
- CWST-RR-S5 — VAD-Red Base- Red Flash
- CWST-RR-W5 — VAD-Red Base- Red Flash & IP65 Base
- CWST-RW-S5 — VAD-Red Base- White Flash
- CWST-RW-W5 — VAD-Red Base- White Flash & IP65 Base
- CWW — White Deep IP65 Base Pack of 5
- CustomMessage — Bespoke Messages Male only or Female only (Contact us)
- D2E — Duct detector housing complete with B401 base for Non-Addressable detectors. (Detector not supplied). Requires DSTXX duct sampling tube and sensor. For accessories please see Morley Addressable devices.
- DBS1224B4W — Ceiling mounting base sounder, four tone (white), no cover. If required the SC085 (white lid) to be ordered separately
- DNRE — Duct detector housing complete with B501AP base for Addressable MI-PSE-S2 or MI-PSE-S2I detectors. (Detector not supplied). Requires DSTXX duct sampling tube and MI-PSE-S2 or MI-PSE-S2I detectors. For Duct accessories please see Duct range in the conventional section.
- DRM-1 — BS7273 Door Release Module, additional failsafe to be used in conjunction with Morley-IAS output modules to provide a compliant solution to BS7273-4 Category A requirements. Powered from the 12-24v door magnet supply
- DSS-PC-I00 — Red Flash, Pure White Body, Clear Lens c/w Isolator. Loop-powered EN54-23 Open Category Detector Base Sounder Strobe in pure white. Requires a B501AP base for fast and simple installation for System Sensor detectors and a choice of sound output levels and tones selectable from the device or panel
- DSS-PC-N00 — Red Flash, Pure White Body, Clear Lens, no Isolator. Loop-powered EN54-23 Open Category Detector Base Sounder Strobe in pure with white. Non-isolated version. Requires a B501AP base for fast and simple installation for System Sensor detectors and a choice of sound output levels and tones selectable from the device or panel
- DST1 — Metal sampling tube duct width up to 0.3m (Not compatible with DH400E and DH400ACDC-E)
- DST1.5 — Metal sampling tube duct widths 0.3 to 0.6m (Not compatible with DH400E and DH400ACDC-E)
- DST10 — Metal sampling tube duct widths 2.4 to 3.7m (Not compatible with DH400E and DH400ACDC-E)
- DST3 — Metal sampling tube duct widths 0.6 to 1.2m (Not compatible with DH400E and DH400ACDC-E)
- DST5 — Metal sampling tube duct widths 1.2 to 2.4m (Not compatible with DH400E and DH400ACDC-E)
- DXC-UPGR-CLSS — Morley DXC Bundle - Contains Gateway, GSM Module and RS232 card. Bundle price for existing DXc installations.
- E-SIB — Morley-IAS Max Communication dongle for CAN Bus & Serial TPP enablement (MA-2000 & MA-8000 only)
- E700-SP-DCL — Label - Sampling Point Wrap Round Label 23mm/4mmt hole
- EACIE1 — Coming soon in 2026 - please contact sales support for more information Evac Smart EACIE 1 BS8629 Panel (12 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE2 — Coming soon in 2026 - please contact sales support for more information Evac Smart EACIE 2 BS8629 Panel (24 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE3 — Coming soon in 2026 - please contact sales support for more information Evac Smart EACIE 3 BS8629 Panel (36 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE4 — Coming soon in 2026 - please contact sales support for more information Evac Smart EACIE 4 BS8629 Panel (48 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- ECO1000RTU A — Remote LASER tester for Vision detectors
- F-A3384-000 — AIR FILTER FOR FAAST 7100E, 8100E & 9400X
- F-BO-AFE70-2 — FAAST Automatic Purging Unit
- F-BO-AFE70-3 — FAAST Automatic Purging Unit- Freezer Applications
- F-INF-25 — FAAST LT200 External Pipe Filter
- F-INF-25-RF — FAAST LT200 External Pipe Filter - Replacement Filter Pack. Pack of 4.
- F-LT-EB — FAAST LT Earth Bar
- F-PC-0 — Standard-Clip for ASD pipework 0.0mm Pack of 5
- F-PC-2 — Standard-Clip for ASD pipework 2.0mm Pack of 5
- F-PC-2.5 — Standard-Clip for ASD pipework 2.5mm Pack of 5
- F-PC-3 — Standard-Clip for ASD pipework3.0mm Pack of 5
- F-PC-3.5 — Standard-Clip for ASD pipework 3.5mm Pack of 5
- F-PC-4 — Standard-Clipfor ASD pipework 4.0mm Pack of 5
- F-PC-4.5 — Standard-Clip for ASD pipework 4.5mm Pack of 5
- F-PC-5 — Standard-Clip for ASD pipework 5.0mm Pack of 5
- F-PC-5.5 — Standard-Clip for ASD pipework 5.5mm Pack of 5
- F-PC-6 — Standard-Clip for ASD pipework 6.0mm Pack of 5
- F-PC-6.5 — Standard-Clip for ASD pipework 6.5mm Pack of 5
- F-PC-HE-2 — Freezer clip for ASD pipework 2.0mm Pack of 5
- F-PC-HE-2.5 — Freezer clip for ASD pipework 2.5mm Pack of 5
- F-PC-HE-3 — Freezer clip for ASD pipework 3.0mm Pack of 5
- F-PC-HE-3.5 — Freezer clip for ASD pipework 3.5mm Pack of 5
- F-PC-HE-4 — Freezer clip for ASD pipework 4.0mm Pack of 5
- F-PC-HE-4.5 — Freezer clip for ASD pipework 4.5mm Pack of 5
- F-PC-HE-5 — Freezer clip for ASD pipework 5.0mm Pack of 5
- F-PC-HE-5.5 — Freezer clip for ASD pipework 5.5mm Pack of 5
- F-PC-HE-6 — Freezer clip for ASD pipework 6.0mm Pack of 5
- F-PC-HE-6.5 — Freezer clip for ASD pipework 6.5mm Pack of 5
- F-SEN-SSE — Replacement sensor for FAAST LT200 - Standalone
- FAAST-8100E — FAAST-8100E
- FAAST-LT — FAAST-LT
- FL-IF-2 — FAAST LT Spare Filter, Pack of 2
- FL0122E — FL0122E
- FLT2-AB-SA2 — FAAST LT200 Standalone dual channel accessories box
- FLX-010 — Single channel ASD Unit
- FLX-020 — Dual channel ASD unit
- FLX-SP-01 — FAAST Flex Aspirating Smoke Detector Accessory: Sensing Module
- FLX-SP-02 — FAAST FlexAspirating Smoke Detector Accessory: Metal Filter: Pack of 6
- FLX-SP-03-EN — FAAST Flex Aspirating Smoke Detector Accessory: Front Cover
- FLX-SP-04 — FAAST Flex
- FLX-SP-05-EN — FAAST Flex Aspirating Smoke Detector Accessory: Internal Cover Set
- FLX-SP-06 — FAAST FLEX ADAPTER SET
- FS20X-211-10-6 — Flame Electronics Module for FS20X Detector
- FS20X-211-23-6 — Flame IR2/UV 60m Zone 1 Red Aluminium
- FS20X-211-24-6 — Flame IR2/UV 60m Zone 1 Stainless Steel
- FS24XP-AMGXX — FS24X Triple IR flame detector Aluminium (Red) M25
- FS24XP-SMGXX — FS24X Triple IR flame detector Stainless Steel M25
- FSL100-IR3 — Flame IR3 35m Zone 2/22 Red
- FSL100-SM21 — Flame FSL100 Swivel Mount
- FSL100-TL — Flame FSL100 Test Lamp
- FSL100-TLBT — Flame 12V DC Battery for FSL test lamp
- FSL100-TLBU — Flame H3 Bulb for FSL test lamp
- FSL100-TLCH — Flame Charger kit for FSL test lamp
- FSL100-UV — Flame UV 25m Zone 2/22 Red
- FSL100-UVIR — Flame UV/IR 25m Zone 2/22 Red
- FSX-A001 — Flame FSX Diagnostic Kit c/w Interface Module, RS485/USB Cable, PSU, Win PC Software
- FSX-A006 — Flame IR Bulb for TL Test Lamps
- G07-0199-000 — FAAST LT Replacement Fan Gasket
- GATEWAY SUBSCRIPTION PRO FM — Yearly Gateway Professional Facility Manager License Access to end user MCP testing and Panel Controls - 1 License per User Currently only available to order via CLSS SITE MANAGER
- GATEWAY SUBSCRIPTION NETWORK SYSTEM — Yearly Gateway Connection Fee for a single Network (Domain). Includes GSM Data Charges and Unlimited Professional Technician Licenses. Currently only available to order via CLSS SITE MANAGER
- GATEWAY SUBSCRIPTION SINGLE PANEL — Yearly Gateway Connection Fee for a Single Panel Includes GSM Data Charges and Unlimited Professional Technician Licenses. Currently only available to order via CLSS SITE MANAGER
- GATEWAY SUBSCRIPTION VESDA — Vesda Detector Connection to CLSS (requires a Gateway) 1 VESDA license per Detector Currently only available to order via CLSS SITE MANAGER
- HLS-DOCBOX — Lockable Enclosure for Storage of Site Documentation
- HLS-PSU-TR20 — Transformer Rectifier 24VDC 2.0A
- HLS-PSU-TR40 — Transformer Rectifier 24VDC 4.0A
- HLSPS25 — 24VDC 2.5amp EN54-4 Power Supply
- HLSPS50 — 24VDC 5amp EN54-4 Power Supply
- HON-CGW-MBB — Fixed CLSS Gateway (Ethernet and Wi-Fi)
- IBS-LIDPW — Pure White cover plate for base sounders. Pack of 10
- IM-10EA — Ten input monitor module to provide an interface to a normally open contact devices such as plant outputs or flow switches. Requires back box 797-065
- ISP-001 — ICAM Replacement black filter element - course (20 ppi) Pack of 10 Available until 31-12-2023
- ISP-002 — ICAM Replacement black filter element - fine (45ppi) Pack of 10 Available until 31-12-2023
- K20SRS-11 — Wall-Mounted Addressable Wireless Sounder VAD - White/Red. Powered by 4x CR123A 3V batteries
- K20SWS-11 — Indoor key switch white, key removable in both positions, single pole
- K21SRS-01 — Key Operated MCP (Supplied without back box) N/O contact
- KFB6 — 6"Fire Bell, 24Vdc, 15mA, 94dBA @ 1m
- LSC-506 — 6 watt ceiling loudspeaker c/w metal rear cover (5.5”)
- LSC-606 — 6 watt ceiling loudspeaker c/w metal rear cover (6.5”) BS EN 54-24
- LSC-606/DC — 6 watt ceiling loudspeaker c/w metal rear cover with DC blocking capacitor (6.5”) BS EN 54-24
- LT-ACC-ERO-16 — Ethernet Relay Output 16 port
- LT-ACC-ERO-MKT — Relay Output DIN-Rail Mount Kit
- LT-ACC-ETS-16 — Ethernet Switch 16 port
- LT-ACC-ETS-5 — Ethernet Switch 5 port
- LT-ACC-ETS-8 — Ethernet Switch 8 port
- LT-ACC-HUB-MKT — Hub DIN-Rail Mount Kit
- LT-ACC-HUB-POE-HON — Hub PoE LT Gen 3
- LT-ACC-HUB-PWR-HON — Hub Direct Power LT Gen 3
- LT-ACC-NCL-10 — RJ45 Cable 10' LT Gen 3
- LT-ACC-NCL-100 — RJ45 Cable 100' LT Gen 3
- LT-ACC-NCL-25 — RJ45 Cable 25' LT Gen 3
- LT-ACC-NCL-3 — RJ45 Cable 3' LT Gen 3
- LT-ACC-NCL-5 — RJ45 Cable 5' LT Gen 3
- LT-ACC-NCL-50 — RJ45 Cable 50' LT Gen 3
- LT-ACC-POE-24 — Ethernet Switch PoE, 24 ports
- LT-ACC-POE-24-ADR — PoE Switch 24 port, IEC Power Adapter
- LT-ACC-POE-4 — Ethernet Switch PoE, 4 ports
- LT-ACC-PWR-12 — Power Supply 12VDC
- LT-ACC-PWR-48 — Power Supply 48VDC
- LT-ACC-SAK — Spare 4xTerminators 1xScrew Adapter
- LT-ACC-TST — DEC Bump Test Bottle
- LT-CTR-SML — Ctr LT Gen 3
- LT-CTR-SML-DMK — Ctr Small DIN-Mount Kit LT Gen 3
- LT-SEN-IM-UL — Li-ion Tamer Interface Module UL
- LT-SEN-M — Monitoring sensor
- LT-SEN-M-L — Li-ion Tamer GEN2+ monitoring sensor
- LT-SEN-M3 — Sensor Monitoring LT Gen 3
- LT-SEN-MOS — Li-ion Tamer Multi Output System
- LT-SEN-R3 — Sensor Reference LT Gen 3
- M1A-R470FG-G017-01 — Flush MCP 470 Ohms, Glass (supplied without back box)
- M1A-R470SF-G017-01 — MCP1A-RED-470-SURFACE-BC136R-FE1140-F222
- M1A-R470SG-K013-81 — intrinsically safe indoor call point, 470 ohm. ATEX Approved.
- M1A-R470SG-STCK-01 — Surface call point with 470 Ohm resistor and N.O. contact. Complete with glass. (Old PN: MCP1A-R470SG-01)
- M1A-Y470SF-K013-11 — Yellow conventional KAC manual Call point
- M200E-DIN — DIN rail mounting clip for M2xx series modules
- M200E-PMB — M200E-PMB
- M200E-SMB — Interface Enclosure (Small) Plastic Previously listed as S4-34493
- M200F-RF — Agile Repeater. Network Repeater for extending the range of System Sensor Agile wireless networks. Powered by 4 x CR123A 3v batteries
- M200G-RF-26 — Agile Gateway. Loop-powered Gateway device for System Sensor Agile wireless system. Up to 8 Gateways may be used on the same loop. This requires a B501AP base. Compatible with DXc panels only
- M200I-RF — Agile Wireless Remote Indicator for System Sensor Agile wireless systems. Indicates the status of up to four System Sensor Agile wireless detectors via three coloured LEDs
- M200SMB — Deep Module enclosure
- M200WC-RF-PRO — Agile Waterproof Wireless Manual Call Point RF 868 MHz System Sensor PRO
- M200XE — Loop isolation module. Requires M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails
- M201EA — SINGLE OUTPUT MODULE - SYSTEM SENSOR
- M201EA-240 — Output control module System Sensor Protocol. 240V ac relay contact rating, no longer comes with an enclosure eg M200E-SMB
- M210EA — SINGLE INPUT MODULE - SYSTEM SENSOR
- M210EA-CZ — Analogue addressable monitor module for supervision of a conventional zone equipped with capacitive EOL element
- M210EA-CZR — Analogue addressable monitor module for supervision of a conventional zone equipped with EOL resistor
- M220EA — DUAL INPUT MODULE - SYSTEM SENSOR
- M221EA — 2 INPUT, 1 OUT MODULE - SYSTEM SENSOR
- M501MEA — Addressable "mini" input module. It will interface with contact devices such as security contacts and waterflow switches, suitable for mounting inside monitored equipment
- M5A-RP01FF-K013-01 — Addressable manual call point no Isolator. Flexible element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP01FF-01)
- M5A-RP01FG-K013-01 — Addressable manual call point no Isolator. Glass element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP01FG-01)
- M5A-RP02FF-K013-01 — Addressable manual call point c/w Isolator. Flexible element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP02FF-01)
- M5A-RP02FG-K013-01 — Addressable manual call point c/w Isolator. Glass element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting.
- MA-1000-01 — Morley-IAS Max Single loop (non-networkable) For System Sensor & Apollo protocol
- MA-1000-03 — Morley-IAS Max Single loop (non-networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-1BZL — Morley-IAS Max MA-1000 Bezel
- MA-2000-01 — Morley-IAS Max two loop (networkable) For System Sensor & Apollo protocol
- MA-2000-03 — Morley-IAS Max Stwo loop (networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-2BZL — Morley-IAS Max MA-2000 Bezel
- MA-8000-01 — Morley-IAS Max four loop, expandable to eight (networkable) For System Sensor & Apollo protocol
- MA-8000-03 — Morley-IAS Max four loop, expandable to eight (networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-8BZL — Morley-IAS Max MA-8000 Bezel
- MA-LCD7 — Max 7" Touchscreen repeater/zonal mimic
- MA-LIB2-01 — Morley-IAS Max dual Loop card for MA-8000. includes mounting fixtures
- MCX-55ME — 5-way Addressable monitor (input) & 5 way relay control (output) card (unboxed) complete with end of line resistors, individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's. Requires back box 797-065
- MI-FLX-010 — Single channel ASD Unit -System Sensor Protocol Addressable loop connected
- MI-FLX-020 — Dual channel ASD unit - System Sensor Protocol Addressable loop connected
- MMX-10ME — 10 way Addressable monitor (input) card (unboxed) complete with end of line resistors, individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's. (Use only as spares/replacements and for extensions of existing sites)
- MUS156 — Spare Glasses Conventional MCP (Pack of 10)
- MUS158 — Call point glass (Old PN: KG1X50) Pack of 10
- NANO-24 — Nano Single Loop Control Panel. Non networkable. Batteries not included - requires 2 x 4015-501-YFR (Power Sonic Flame Retardant 12V 7Ah) to meet compliance regulations.
- NANO-FLUSH — Flush Mounting Bezel for Nano-24
- NP1.2-12 — YUASA NP Battery 1.2 AH-12V Flame Retardant
- NP12-12 — YUASA NP Battery 12 AH-12V Flame Retardant (Used in ZXSe panels)
- NP17-12 — YUASA NP Battery 17 AH-12V Flame Retardant (Used in DXc & ZXSe Panels)
- NP2.8-12 — YUASA NP Battery 2.8 AH-12V Flame Retardant (Used in Morley Horizon Panels)
- NP24-12 — YUASA NP Battery 24 AH-12V Flame Retardant
- NP38-12 — YUASA NP Battery 38 AH-12V Flame Retardant
- NP65-12 — YUASA NP Battery 65 AH-12V Flame Retardant
- NP7-12 — YUASA NP Battery 7 AH-12V Flame Retardant (Used in Horizon, DXc & ZXSe Panels)
- NS-SPARE — Spares Pack for Nano
- OSE-ACF — Anti-condensation film for Emitters. An easy applicable film that provides condensation resistance for the lenses of OSID Emitters.
- OSE-HP-01 — Emitter - High Power, Alkaline Battery Alkaline Battery for High Power Emitter
- OSE-HPW — Emitter - High Power, Wired 24 Vdc Power Supply for High Power Emitter. Enables double the detection ranges on the OSI- 90
- OSE-RBA — Spare alkaline battery pack for Emitter units. Replacement Alkaline Battery pack for Emitters.
- OSE-SP-01 — Emitter - Alkaline Battery Alkaline Battery for Standard Power Emitter
- OSE-SPW — Emitter - Standard Power, Wired 24 Vdc Power Supply for Standard Power Emitter
- OSEH-ACF — Anti-condensation film for OSID-EHE and OSID-EHI environmental housings. An easy applicable film that provides condensation resistance for the lenses of OSID Environmental Housings
- OSI-10 — Imager - 7º coverage Imager with a 7° field of view providing distances 30m to 150 m. NB: Not suitable for use with High Powered Emitters.
- OSI-45 — OSI-45
- OSI-90 — Imager - 80º coverage-Imager with an 80° field of view providing distances 6m to 68m. Distances: 6-34m with OSE-SP-01 / OSE-SPW, 12-68m with OSE-HPW, 12-50m with OSE-HP-01. OSI-90 can operate with up to 7 Emitters.
- OSI-RE-SS — Conventional Reflective Beam. Uses the same accessories as the 6500 conventional beams. Please see conventional section to find these accessories
- OSI-RWG — OSID-R BEAM WIRE GUARD
- OSID-DE — OSID-DE
- OSID-EHE — Emitter environmental housing IP66 IP66-rated Environmental Housing for Emitters. Protects OSID Emitters from dust and water ingress
- OSID-EHI — Imager environmental housing IP66 IP66-rated Environmental Housing for Emitters. Protects OSID Imagers from dust and water ingress.
- OSID-INST — OSID Installation Kit. Kit including: Laser Alignment Tool, Test Filter, PC Cable, Cleaning Cloth, Reflectors and Manual.
- OSID-WG — Wire Guard. Steel cage to protect OSID Imagers and Emitters from damage.
- OSP-001 — FTDI Cable 1.5m. 1.5m cable for connecting a PC to the Imager for use with OSID Diagnostic software. Cable may be extended by a further 20m when using an active USB amplifier.
- OSP-002 — Laser Alignment tool. A simple and effective tool for fast alignment of OSID devices. Aligns and locks the eyeball. Also activates Emitters when locked.
- OSP-003 — OSID FILTER ACRYLIC TEST PK10
- OSP-003-200 — OSID FILTER ACRYLIC TEST PK200
- OSP-004 — TEST FILTER 10 PK FOR OSID-R
- P87-0511-001 — FAAST LT Replacement Fan Assembly
- PIP-001-2.4 — 25mm ABS Pipe 2.4m PK25 RED
- PIP-001-2.4-W — 25mm ABS Pipe 2.4m PK25 WHITE
- PIP-002 — 25mm ABS Socket Joiner 25MM PK10 RED
- PIP-002-W — 25mm ABS Socket Joiner 25MM PK10 WHITE
- PIP-003 — 25mm Socket Union PK10 RED
- PIP-003-W — 25mm Socket Union PK10 WHITE
- PIP-004 — Red ABS 3.4'' x 25mm Adaptor (Pack of 10)
- PIP-005 — 25mm ABS 90 Degree Slow Bend PK10 RED
- PIP-005-W — 25mm ABS 90 Degree Slow Bend PK10 WHITE
- PIP-006 — 25mm ABS 45 Degree Elbow PK10 RED
- PIP-006-W — 25mm ABS 45 Degree Elbow PK10 WHITE
- PIP-007 — 25mm ABS End Cap PK10 RED
- PIP-007-W — 25mm ABS End Cap PK10 WHITE
- PIP-008 — 25mm ABS Equal Tee PK10 RED
- PIP-008-W — 25mm ABS Equal Tee PK10 WHITE
- PIP-009 — 25mm ABS Pipe Clip PK20 RED
- PIP-009-W — 25mm ABS Pipe Clip PK20 WHITE
- PIP-012 — ABS Solvent Cement 250ml
- PIP-014 — PIPE CUTTER
- PIP-015 — Flush Sample Point Head Only (for 10mm OD Tube)
- PIP-016 — 25mm to 10mm ABS Capillary Tee PK10 RED
- PIP-016-W — 25mm to 10mm ABS Capillary Tee PK10 WHITE
- PIP-017 — 25mm ABS 90 Degree Elbow PK10 RED
- PIP-017-W — 25mm ABS 90 Degree Elbow PK10 WHITE
- PIP-018 — 25mm ABS End Cap Test Point PK10 RED
- PIP-018-W — 25mm ABS End Cap Test Point PK10 WHITE
- PIP-019 — 25mm Expansion socket
- PIP-021 — 25mm Flexible connector. 30CM RED
- PIP-021-W — 25mm Flexible connector. 30CM White
- PIP-022 — 25mm to 3/8” Female BSP Tee
- PIP-023 — 25mm 2 way ball valve
- PIP-024 — 25mm Over Pressure Check Valve
- PIP-025 — 25 mm x 12" Condensation Trap with Ball Valve
- PIP-026 — 25mm Flexible connector. 30CM RED
- PIP-026-W — 25mm Flexible connector. 30CM WHITE
- PIP-027 — Capillary Test Point with Cap
- PIP-033 — 25mm Clear condensation drain with manual bung (Short)
- PIP-034 — 25mm to 10mm Capillary Trunk Adapter
- PIP-037 — 25mm ABS to 22mm Copper Socket
- PIP-038 — 25mm Manual Airline Purge Kit
- PIP-039 — VESDA Exhaust Silencer
- PIP-044 — Xtralis Flush Sampling Kit
- PL-1000 — PLUS compact addressable fire panel
- PL-LIB01S — PLUS LOOP CARD V2
- POL-200-TS — Intelligent hand-held diagnostic test unit for analogue loops. Supplied complete with internal rechargeable battery and power supply
- POLE HWKIT — POLE. Telescopic access pole for setup and maintenance of Agile wireless systems. Extends from 1.5 to 5.2m in length
- PRINTER-H-PAPER — Spare Paper Roll - 58mm
- PRINTER-HAND — Hand Held Printer - Thermal Type 58mm
- PS031W — BOX MCP SURFACE MOUNT RED 1 TERMINAL
- PS188 — Deep Base O-Ring (Can be added to the conventional AV base to make it IP65 rated)
- PS189 — Deep base Gasket accessory can be installed between the base and the mounting surface to provide the appropriate seal. Pack of 5
- PS200 — Call point cover.
- PS230 — Resettable element for Conventional MCP (pack of 10)
- PS340 — 10 X IP 21 SEAL(C 934) BRH/BRS/BGL
- PSU-12 — Flame Charger kit for TL test lamp
- R5A-RF — Agile WCP call point. Waterproof Manual Call Point for the System Sensor Agile wireless system. With magnetic anti-tamper mechanism and IP67-rating. Powered by 4 x CR123A 3v batteries
- REL/T/245 — Wall-Mounted Addressable Wireless Sounder VAD - Red/Red. Powered by 4x CR123A 3V batteries
- RI/W/3V — Remote LED (flush mounting). Requires a single gang backbox for mounting
- RI/W/BB — Surface Mount Base for RI/W/3V Remote LED indicator
- RMK400AP — Recess mounting kit suitable for flush mounting bases into a false ceiling
- RSV-R25 — Non Return Valve
- RTS151KEY — BEAM IMAGER RESET FLUSH MT
- RTS151KIT — OSID IMAGER RESET STATION SURF MT
- S2IP-SN-R3 — Backwards compatible sounder (RED) - Replacement for 34203 3way Sounder
- S2IP-SN-W3 — Backwards compatible sounder (WHITE) - Replacement for 34203 3way Sounder
- S3-BASE-SR — S3 red Shallow base (pack of 5)
- S3-BASE-SW — S3 White Shallow base (pack of 5)
- S3-CONTROL — HandiLink IR Remote Control for the S-Cubed Range of Sounders
- S3-GASKET-IP55 — Gasket kit for S3 deep base - increases particle ingress from IP21 to IP55 (Pack of 10)
- S3-S-R — S3 Sounder red Body
- S3-S-VAD-HPR-R — S3 red Body Sounder High Power red VAD
- S3-S-VAD-HPR-W — S3 White Body Sounder High Power red VAD
- S3-S-VAD-LPR-R — S3 red Body Sounder Standard Power red VAD
- S3-S-W — S3 Sounder White Body
- S3-V-R — S3 Voice Sounder red Body
- S3-V-VAD-HPR-R — S3 red Body Voice Sounder High Power red VAD
- S3-V-VAD-HPW-R — S3 red Body Voice Sounder High Power White VAD
- S3-V-W — S3 Voice Sounder White Body
- S3-VAD-HPR-R — S3 red Body High Power red VAD
- S3EP-S-R — S3 EP (IP66) Sounder red Body
- S3EP-V-VAD-HPR-R — S3 EP (IP66) red Body Voice Sounder High Power red VAD
- S3EP-V-VAD-HPW-R — S3 EP (IP66) red Body Voice Sounder High Power White VAD
- S3EP-VAD-HPR-R — S3 EP (IP66) red Body High Power red VAD
- S4-34401 — Single channel Mains switching interface (c/w enclosure)
- S4-34404 — Four channel Mains switching interface (c/w enclosure)
- S4-34410 — Single Channel Interface, LV Input only (no enclosure)
- S4-34411 — Single Channel (output only) Interface c/w Relay - DIN Mounting
- S4-34412 — 12 input Interface module (supervisory inputs only)
- S4-34415 — Single Channel (output only) Interface c/w Relay and Enclosure
- S4-34418 — Key switch Interface (Single Channel) c\w blue Enclosure
- S4-34420 — LV Interface 1 Output & 1 Input (no enclosure)
- S4-34440-02 — Mains Powered Interface - max o/p power 1.5A. Batteries not included - requires 2 x 4015-502-YFR (Power Sonic Flame Retardant 12V 2.1Ah) to meet compliance regulations.
- S4-34440-12 — Mains Powered Interface - max o/p power 2.5A. Batteries not included - requires 2 x 4015-514-YFR (Power Sonic Flame Retardant 12V 12Ah) to meet compliance regulations.
- S4-34440-ASD — ASD Mains Powered Interface for FAAST LT. Batteries not included - requires 2 x 4015-604-YFR (Power Sonic Flame Retardant 12V 14Ah) to meet compliance regulations.
- S4-34450 — 4 Channel Interface (input/output) (no enclosure)
- S4-34490 — Interface Enclosure Large (Plastic)
- S4-34491 — Pack of 5 DIN Rail Brackets for LV Interface
- S4-34492 — Interface Enclosure - Small (metal) with 20mm and 25mm knockout
- S4-34494 — Connection convertor for S4-34412 and S4-34600 (26 core ribbon to Terminal block)
- S4-34496 — Interface enclose Plastic houses 6 interfaces
- S4-34499 — Set of 2 Keys for Key switch Interface & MCP
- S4-34600 — LED Driver Board for special Mimics
- S4-34740 — Beam Sensor Pair (Transmitter and Receiver) excl bracket and Base
- S4-34741 — Beam Sensor Transmitter
- S4-34741-01 — 34740 Angle Bracket + Base
- S4-34741-03 — 34740 Parallel Bracket + Base
- S4-34741-50 — Obscuration test card set
- S4-34741-99 — Light Shields for Beam Receiver (pack of 5)
- S4-34742 — Beam Sensor Receiver
- S4-34760 — Duct Housing (Inc S Quad BASE AND 0.6M TUBE)
- S4-34760-15 — 1.5m Venturi Tube
- S4-34760-28 — 2.8m Venturi Tube
- S4-34760-99 — Mounting Bracket
- S4-34800 — Vigilon Manual Call Point with Glass Element IP 43 (excludes back box)
- S4-34805 — Vigilon Manual Call Point with Resettable Element (excludes back box)
- S4-34805-EP — IP67 Vigilon Manual Call Point with Resettable Element
- S4-34807 — Vigilon Key switch MCP (supplied without back box)
- S4-34842 — Vigilon Manual Call Point with Glass Element and Protective Cover (excludes back box)
- S4-34845 — Vigilon Manual Call Point with Resettable Element and Protective Cover (excludes back box)
- S4-34890 — Resettable Element for Vigilon MCP (sold in packs of 10) price per pack
- S4-34891 — Replacement Glass for S4-34800 (sold in pack of 10) price per pack
- S4-34892 — Protective Cover for S4-34800 and S4- 34805 (sold in pack of 20) price per pack
- S4-34895 — Surface Back Box (red) for S4-34800 range of MCP's (Sold in packs of 10) price per pack
- S4-34896 — Anti-Tamper Enclosure for MCP (IP66)
- S4-34899 — Test Key for S4-34800 range of MCP (sold in packs of 25) price per pack
- S4-700 — Base - Common for all S-Quad Sensors
- S4-700-34K — 34000 S-Quad Adapter Base
- S4-701 — IP21 base and base cover (pack of 1)
- S4-705 — IP21 base covers (pack 5)
- S4-710 — S4 Optical Heat Sensor
- S4-711 — S4 Dual Optical Heat Sensor
- S4-711-V — S4 Dual Optical Heat Sensor Voice Sounder
- S4-711-V-VAD-HPR — S4 Dual Optical Heat Sensor Voice Sounder High Power red VAD
- S4-711-V-VAD-HPW — S4 Dual Optical Heat Sensor Voice Sounder High Power White VAD
- S4-711-V-VAD-LPR — S4 Dual Optical Heat Sensor Voice Sounder Standard Power red VAD
- S4-711-VAD-HPR — S4 Dual Optical Heat Sensor High Power red VAD
- S4-715 — S4 Optical Detector
- S4-720 — S4 Heat Sensor
- S4-720-V-VAD-HPR — S4 Heat Sensor Voice Sounder High Power red VAD
- S4-770-S — S4 Optical Heat Sensor Sounder
- S4-771-S — S4 Dual Optical Heat Sensor Sounder
- S4-780-S — S4 Heat Sensor Sounder
- S4-901 — S4 CO Dual Optical Heat Sensor
- S4-911-V-VAD-HPR — S4 CO Dual Optical Heat Sensor Voice Sounder High Power red VAD
- S4-911-V-VAD-HPW — S4 CO Dual Optical Heat Sensor Voice Sounder High Power White VAD
- S4-FLUSH — S-Quad Semi-Flush Mounting Kit
- S4BK-700 — Black Base - Common for all S-Quad Sensors
- S4BK-705 — Black IP21 base covers (pack 5)
- S4BK-711 — S4 Black Dual Optical Heat Sensor
- S4BK-711-V — S4 Black Dual Optical Heat Sensor Voice Sounder
- S4BK-711-V-VAD-HPR — S4 Black Dual Optical Heat Sensor Voice Sounder High Power red VAD
- S4M-S — S4M Sounder only
- S4M-V-VAD-LPR — S4M Voice Sounder Low Power C Class VAD Red.
- S4M-VAD-LPR — S4M Low Power C Class VAD Red.
- S4T-710 — S4 SELF TEST Optical Heat Sensor
- S4T-711 — S4 SELF TEST Dual Optical Heat Sensor
- S4T-711-V — S4 SELF TEST Dual Optical Heat Sensor + Voice Sounder
- S4T-711-V-VAD-HPR — S4 SELF TEST Dual Optical Heat Sensor + Voice Sounder & High Power Red VAD
- S4T-711-VAD-HPR — S4 SELF TEST Dual Optical Heat Sensor + High Power Red VAD
- S4T-720 — S4 SELF TEST Heat Sensor
- S4T-720-V-VAD-HPR — S4 SELF TEST Heat Sensor + Voice Sounder & High Power Red VAD
- S4T-770-S — S4 SELF TEST Optical Heat Sensor + Sounder
- S4T-771-S — S4 SELF TEST Dual Optical Heat Sensor + Sounder
- S4T-780-S — S4 SELF TEST Heat Sensor + Sounder
- S4T-BASE-PROGRAM — Programmer Base for S4/T/M and S3 Voice Sounders
- S4T-DEMO — S4T Self Test Demonstration kit. Includes, S4T-711 O2H ST detector, S4T Programmer Base, Metal Stand, Power supply & leads
- S4TB-711-V-VAD-HPR — S4 SELF TEST Black Dual Optical Heat Sensor + Voice Sounder & High Power Red VAD
- SAFE-RED-D-KIT — SAFE 2 button Stainless Steel plus inter
- SAFE-RED-D-SPARE — SAFE 2 button Red plus loom
- SAFE-SS-D-KIT — SAFE 2 button Stainless Steel plus inter
- SAFE-SS-D-SPARE — SAFE 2 button Stainless Steel plus loom
- SAFE-WHITE-D-KIT — SAFE 2 button White plus interface
- SAFE-WHITE-D-SPARE — SAFE 2 button White plus loom
- SAFE-WHITE-S-KIT — SAFE 1 button white plus interface
- SAFE-WHITE-S-SPARE — SAFE 1 button white plus loom
- SC070 — Pack of test keys (pack of 10)
- SC076 — Earth strap. Pack of 5
- SC085 — White cover plate for DBS1224B4W ceiling mounting sounder. Pack of 10
- SH-001 — Flame FS20X/24X Sunshield
- SM4 — Flame FS20X/24X Swivel Mount SS.
- SMB500 — Surface Mount Module Box. Plastic, not suitable for M7xx modules
- SMB6-V0 — Surface mount box for up to 6 M2xx modules
- SOLOADAPT HWKIT — Adapter for No Climb Solo poles - for use with CUP HWKIT
- SOUNDER-EX — Banshee Excel IS28 MK6 ATEX approved sounder (No EN54-3 approval) Monitored
- SSE-DRS-1 — BS7273 Door Release system. Comprising DRM-1 door release module and M201 single output model prewired and mounted in SMB6-V0 surface mount box. Used provide a compliant solution to BS7273-4 Category A requirements. Powered from the 12-24v door magnet supply. System Sensor protocol
- ST-LICENCE-14Y — Self-Test 14 Year License 1 required per ST device Unlimited testing for 14 years Currently only available to order via CLSS SITE MANAGER
- ST-LICENSE-10Y — Self-Test 10 Year License 1 required per ST device Unlimited testing for 10 years Available to order via CLSS SITE MANAGER in Q1 2025
- ST-LICENSE-1Y — Self-Test 1 Year License 1 required per ST device Unlimited testing for 1 year Currently only available to order via CLSS SITE MANAGER
- ST-LICENSE-3Y — Self-Test 3 Year License 1 required per ST device Unlimited testing for 3 years Available to order via CLSS SITE MANAGER in Q1 2025
- ST-LICENSE-5Y — Self-Test 5 Year License 1 required per ST device Unlimited testing for 5 years Available to order via CLSS SITE MANAGER in Q1 2025
- TB011 — Flush mounting terminal tray for KAC units (Old PN: ETT-P)
- TL-1055 — Flame FS20X/24X Test lamp Safe Area
- TL-2055 — Flame FS20X/24X Test lamp Hazardous Area
- VCS-CABLES — Spare Ribbon Cable set for Compact Panel
- VCS-IDOOR-PLUS — Replacement Inner Door Assembly for Compact Plus and Compact-24 Panel (supplied in Black)
- VCS-MCB-PLUS — Replacement Main Control PCB for Compact Plus Control Panel
- VCS-ODOOR — Vigilon Compact 24hr Outer Door Assembly (supplied in Grey)
- VCS-ODOOR-PLUS — Compact Plus Outer Door Assembly (supplied in Black)
- VCS-PSU-N — Replacement PSU for Compact Control Panel
- VCS-SPARE — Spares pack for Vigilon Compact (Fuses, Battery leads etc.)
- VEA-040-A00 — VESDA-E VEA-40 Det with LEDs
- VEA-040-A10 — VESDA-E VEA-40 Det with 3.5" Display
- VEP-A00-1P — Single Pipe VEP with FOK LED's - Black Plastic
- VEP-A00-P — 4 Pipe VEP with FOK LED's - Black Plastic
- VEP-A10-P — 4 Pipe VEP with 3.5" Touchscreen Display - Black Plastic
- VER-A40-40-STX — VESDA-E VEA 40-Relay Local StaX
- VES-A00-P — VESDA-E VE Scanner detector with LED's
- VES-A10-P — VESDA-E VE Scanner detector with 3.5" Display
- VEU-A00 — VEU with LEDs
- VEU-A10 — VEU with 3.5" Display
- VHH-100 — Handheld programmer + leads
- VHX-0200 — PC Link HLI + leads
- VHX-0300 — PC Link HLI + leads (Open Protocol)
- VHX-0310 — PC Link HLI Open Protocol Master/Slave
- VHX-0320 — PC Link HLI Access Protocol
- VHX-0400 — Modbus MK1 HLI
- VHX-0410 — Modbus HLI for Darwish & Honeywell only
- VHX-0420 — PC Link HLI Modbus MK3
- VHX-1200 — V skt and HLI in enclosure
- VHX-1300 — Metal Box HLI - Peer to Peer
- VHX-1310 — Metal Box HLI - Master-Slave
- VHX-1320 — Metal Box HLI - Access Protocol
- VHX-1400 — Metal box HLI - Modbus Type 1
- VHX-1410 — Metal box HLI - Modbus Type 2
- VHX-1420 — Metal box HLI - Modbus Type 3
- VIC-010 — VESDAnet Card for FOCUS
- VIC-020 — Multi-function Control Card
- VIC-030 — Multi-function Control Card with MPO
- VID-EX — IS Flashdome ATEX Approved Visual indicating device (No EN54-23 Approval) Monitored
- VIG-19-RACK — Rack Mounting Frame for VIGPLUS-24 in a 19" Rack
- VIG-24-FLUSH — Flush Surround (Main Control Panel and Terminal Node)
- VIG-BNG — BACnet Gateway Assembly for Vigilon & Compact
- VIG-BNG-DINKIT — BACnet Gateway Din Rail Mounting Kit for Mains powered interfaces S4-344402/12
- VIG-BNG-RW — BACnet Gateway Assembly for Vigilon & Compact with Controls & Command Builds
- VIG-BSKIT — Conversion Kit for VIG1-24 EN 54 to BS / V3+ functionality
- VIG-BSKIT-NODE — Conversion Kit For VIG-NODE-24 EN 54 to BS V3+ Functionality
- VIG-COMM-LEAD — USB Commissioning Lead and Dongle
- VIG-DOOR-SS — Stainless Steel Door for Vigilon Main Control Panel
- VIG-FLUSH-SS — Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
- VIG-IOC-DOM — Input/Output Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIG-IOC-V3+ — Input/Output Card for Vigilon V3+
- VIG-LPC — Loop Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54). Supports 3400, 34000 & Pre-VAD Squad devices.
- VIG-LPC-EN — Loop Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIG-LPC-V3+ — Loop Card V3+
- VIG-MCC-EN — Vigilon Main Control Card EN54 Zonal Display
- VIG-MCC-EN-NOD-UPG — Main Control Card - EN 54 Network Node all doors (PLCC extractor necessary)
- VIG-MCC-UPGR — Main Control Card - Vigilon EN 54 panels all doors (PLCC extractor necessary)
- VIG-MCC-V3+ — Vigilon Main Control Card V3+ For 8 Line Display
- VIG-MIM-A3 — A3 Zonal and Graphic Mimic BS & EN compatible supplied in grey. Batteries not included - requires 2 x 4015-603-YFR (Power Sonic Flame Retardant 6V 7Ah) to meet compliance regulations.
- VIG-NC — Network Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIG-NC-DOM-FO — Secure Domain Bridge Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54 & V3+)
- VIG-NC-FO — Fibre Optic Network Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54 & V3+)
- VIG-NC-HYBRID — Vigilon Hybrid Network Card
- VIG-NC-SMF — SMF Network Card
- VIG-NC-V3+ — Network Card V3+
- VIG-NPORT-100 — NPORT 100 - RS232 to IP device (single unit 2 required per link)
- VIG-RPT-DOOR-SS — Stainless Steel Door for Vigilon Repeat
- VIG-RPT-FLUSH — Repeat Panel Flush Surround
- VIG-RPT-FLUSH-SS — Stainless Steel Repeat Panel Flush Mounting Kit
- VIG-UPGR-CLSS — Vigilon Bundle - Contains Gateway, GSM Module, I/O card, PSU and batteries. Bundle price for existing Vigilon installations.
- VIG72-UPGR — Upgrade Kit to convert Vigilon 24 to Vigilon 72. Batteries not included - requires 4 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations. Also requires additional Battery Enclosure VS-BATTBOX-72.
- VIGPLUS-24 — 1 to 4 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in Black. Batteries not included - requires 2 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations.
- VIGPLUS-24-NP — 1 to 4 Loop Vigilon Plus Control Panel without printer c/w 1 loop card & supplied in black. Recommend the use of fixed CLSS Gateway HON-CGW-MBB as a digital printer. Batteries not included - requires 2 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations.
- VIGPLUS-72 — 1 to 6 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in black. Battery Enclosure not included (VS-BATTBOX-72). Batteries not included - requires 4 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations.
- VIGPLUS-72-NP — 1 to 6 Loop Vigilon Plus Control Panel without printer c/w 1 loop card & supplied in black. Recommend the use of fixed CLSS Gateway HON-CGW-MBB as a digital printer. Battery Enclosure not included (VS-BATTBOX-72). Batteries not included - Requires 4X 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations.
- VIGPLUS-MCC — MCC Control Card for VIGPLUS-24 & VIGPLUS-72 (EN54) C/W Micro SD flash memory card
- VIGPLUS-NODE — Vigilon Plus Terminal Node (EN54 version) for use with multiple IO cards and Fibre networks. Supplied in black. Batteries not included - requires 2 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations.
- VIGPLUS-RPT — Vigilon Plus Repeat Panel supplied in black. Batteries not included - requires 2 x 4015-501-YFR (Power Sonic Flame Retardant 12V 7Ah) to meet compliance regulations.
- VKT-855 — VESDA-E VE Scanner demo kit
- VLF-250-00 — Small Area Detector
- VLF-500-00 — Smallish Area Detector
- VLI-880 — VLI with relays and Ethernet only
- VLI-885 — VLI with VESDAnet
- VPS-215-E5 — 24Volt 0.5 amp Power Supply Unit Smaller enclosure with space for up to 7Ah batteries.
- VPS-220-E5 — 24Volt 0.5 amp Power Supply Unit Larger enclosure with space for up to 12 Ah batteries.
- VPS-220-STX5 — VESDA-E STX PSU 0.5A (7-14AH) - BLACK
- VPS-220-STX5-SLV — VESDA-E STX PSU 0.5A (7-14AH) - SILVER
- VPS-250-E5 — 24Volt 3 amp Power Supply Unit With space for up to 38Ah batteries
- VPS-250-STX5 — VESDA-E STX PSU 3A (7-24AH) - BLACK
- VPS-250-STX5-SLV — VESDA-E STX PSU 3A (7-24AH )- SILVER
- VRT-000 — Remote Mounting Box Only
- VRT-100 — Remote Programmer
- VRT-200 — Remote Display (7 relays)
- VRT-300 — Remote VESDAnet socket
- VRT-400 — Remote Scan display (7 relays)
- VRT-500 — Remote Relays (7 Relays)
- VRT-600 — Remote Display No Relays
- VRT-700 — Remote Scanner Disp No Relays
- VRT-800 — Remote Scanner Disp (12 Relays)
- VRT-900 — Remote Relays (12 Relays)
- VRT-E00 — Remote Relays (7 relays) Scanner Only
- VRT-J00 — Remote Compact Displays (7 Relays)
- VRT-K00 — Remote Compact Displays (No relays)
- VRT-Q00 — VLI Remote Display With Relays
- VRT-S07 — System Relay Module
- VRT-T00 — VLI Remote Display without Relays
- VRT-V00 — VLF Remote Display with Relays
- VRT-W00 — VLF Remote Display without Relays
- VS-BATT-CABLE — Battery Lead Pack For VIGPLUS-72
- VS-BATT-PCB — Vigilon Replacement Battery Box PCB
- VS-BATTBOX — Battery Box for Vigilon Panel (excludes batteries)
- VS-BATTBOX-72 — Battery Box for VIGPLUS-72 & VIGPLUS-72-NP. Batteries not included - 72hr panels require 4 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations.
- VS-BPLANE — Replacement Backplane PCB for Vigilon Panels (VIGPLUS, VIGPLUS-24, VIGPLUS-72)
- VS-CABLE-24 — Replacement Ribbon Cables For VIGPLUS-24 and VIGPLUS-72 Panel
- VS-Extractor — Recommended extractor tool for changing Eproms on Panel cards
- VS-FILTER-72 — Battery Filter PCBa/Cable For VIGPLUS-72
- VS-IDOOR-PLUS — Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 (supplied in Black)
- VS-IDOOR-SCREW — Vigilon & Compact Inner Door Screw and Fastener, Pack of 10
- VS-KEY — Spare Key for Vigilon and Compact Outer Door (Pack of 10)
- VS-LSIM — Vigilon loop simulator
- VS-ODLOCK — Replacement Lock for Vigilon Outer Door
- VS-ODOOR — Vigilon Compact 24hr Outer Door Assembly (supplied in Grey)
- VS-ODOOR-PLUS — Outer Door for VIGPLUS-24 & VIGPLUS-72 (supplied in Black)
- VS-PRIN — Replacement Printer Assembly for Vigilon Panels
- VS-PROLL — Printer Roll For Vig & 34000
- VS-PSU-24 — Replacement PSU for VIG1-24
- VS-PSU-72 — Replacement PSU for VIG1-72
- VS-PSU-RPL — Backwards compatible PSU for old style Vigilon Panels
- VS-SPARE-24 — Replacement Spares Pack for Vigilon Control Panels - VIGPLUS-24 & VIGPLUS-72
- VS-TCARD — Vigilon Replacement Terminal Card
- VSINT-KEY — Spare Key Pack for 34450 & 34440 (2 keys)
- VSINT-PCB-ASD — Spare PCB for Vigilon ASD Interface
- VSINT-PCB-LT — Connection PCB for FAAST Interface (FAAST LT)
- VSINTM-PCB-UPG — Replacement Card for Mains Powered Interface (34440)
- VSINTM-PCB02 — Spare PCB for S4 Mains Powered Interface - 1.5A (S4-34440-02)
- VSINTM-PCB12 — Spare PCB for S4 Mains Powered Interface - 2.5A (S4-34440-12)
- VSINTSC-PCB01 — Spare PCB for S4 Single channel Mains Switching I/F (S4-34401)
- VSINTSC-PCB04 — Spare PCB for S4 Four channel Mains Switching I/F (S4-34404)
- VSP-000 — Blank Plate Non-EMC with Logo
- VSP-001 — Programmer
- VSP-002 — Display
- VSP-003 — VESDAnet Socket Kit
- VSP-004 — Scanner Display
- VSP-005 — Filter Cartridge
- VSP-007 — Remote Termination Card (no relay)
- VSP-008 — Remote Termination Card (7 relays)
- VSP-021 — Imperial Pipe Adaptors pack of 4
- VSP-025 — Filters '20' pack
- VSP-030 — VLI Intelligent Filter
- VSP-031 — VLI Secondary filter
- VSP-032 — VLI Aspirator
- VSP-033 — VLI Chamber Assembly
- VSP-034 — VLI VESDAnet Card Spare Part
- VSP-035 — VLI Remote Display Module
- VSP-036 — VLI Ultrasonic Flow Sensor Manifold Spare
- VSP-1000 — VESDA-E VEA 6mm to 4mm Reducer (10)
- VSP-1001 — VESDA-E VEA 6mm to 6mm Straight Union (10)
- VSP-1002 — VESDA-E VEA 4mm to 4mm Straight Union (10)
- VSP-1003 — VESDA-E VEA 6mm to 6mm RA Joiner (10)
- VSP-1004 — VESDA-E VEA 4mm to 4mm RA Joiner (10)
- VSP-1005 — VESDA-E 4-6mm SPL PT TUBE CONVERTER VEA
- VSP-1006 — VESDA-E VOL CHAMBER VEA
- VSP-1007 — VESDA-E SS SPL PT VEA INSTAL TOOL
- VSP-1008 — VESDA-E SS SPL PT VEA DUCT KIT
- VSP-1010 — VESDA-E REL PCA KIT VEA
- VSP-102 — Relay processor module
- VSP-103 — Scanner Relay processor module
- VSP-200 — Blank Plate EMC no Logo
- VSP-208 — Remote Termination Card (12 relay)
- VSP-509 — LaserCOMPACT RO 9 pin lead
- VSP-610 — Xtralis Tamperproof Sampling Point 25mm Standard Pipe
- VSP-620-01 — ASD SPL PT TAMPER PROOF 6MM CAP
- VSP-620-02 — ASD SPL PT TAMPER PROOF 8MM CAP
- VSP-620-03 — Xtralis Tamperproof Sampling Point 10mm Capillary Tube
- VSP-704 — VLF English & Icon Display
- VSP-715 — VLF-500 Aspirator Assembly (2 fans)
- VSP-722 — VLF-250 Aspirator Assembly (1 fan)
- VSP-810 — Smoke Test Pen
- VSP-811 — Smoke Test Pen Refill
- VSP-850-G — In-Line Filter Grey
- VSP-850-R — In-Line Filter Red
- VSP-855-4 — In-Line Filter Elements (4pk)
- VSP-860 — Refrigerated storage sampling kit
- VSP-870 — Inline Flow Restrictor Assembly for Refrigeration Sampling
- VSP-871 — VESDA RESTRICTOR FLOW PK10
- VSP-877 — Flush Mount Sampling Point Head Only (for 6mm, 8mm, 10mm Capillary tubing) WHITE
- VSP-877-B — Flush Mount Sampling Point Head Only (for 6mm, 8mm, 10mm Capillary tubing) BLACK
- VSP-877-G — Flush Mount Sampling Point Head Only (for 6mm, 8mm, 10mm Capillary tubing) GREY
- VSP-955 — VESDA-E VES SCANNER MANIFOLD
- VSP-955-04 — VES Scanner Manifold
- VSP-956 — VESDA-E SERIES VEP/VEU Manifold
- VSP-956-04 — VEU, VEP, VEP-1P spare manfold
- VSP-960 — VESDA-E Mounting Bracket
- VSP-962 — VESDA-E Filter
- VSP-962-20 — VESDA-E Filter - Pack of 20
- VSP-963 — VESDA-E Aspirator
- VSP-964-03 — VESDA-E DET CHAMBER MK3
- VSP-964-04 — VEU, VEP, VEP-1P, VES. Spare Smoke Detection Chamber
- VSP-965 — VESDA-E Sampling Chamber
- VSP-966 — VESDA-E VEU-A00 Front Cover LEDs
- VSP-967 — VESDA-E VEU-A10 Front Cover 3.5" Display
- VSP-967-04 — VEU-A10 Front Cover - Aluminium - LCD - 3.5" Display
- VSP-968 — VESDA-E VEP-A00-P/1P Front Cover Plastic LEDs
- VSP-969 — VESDA-E VEP-A10-P Front Cover Plastic 3.5" Display
- VSP-969-04 — VEP-A10-P Front Cover - Plastic - LCD - 3.5" Display
- VSP-969-04-S — VES-A10-P Front Cover - Plastic - LCD - 3.5" Display
- VSP-969-S — VESDA-E COVER FR 3.5" DISP VES-A10-P
- VSP-970 — VESDA-E VEA-40 Mounting Bracket Spare
- VSP-971 — VESDA-E VEA-40 Smoke Sensor Module Spare
- VSP-972 — VESDA-E VEA Filter Spare
- VSP-973 — VESDA-E VEA Pump MkII Spare
- VSP-974 — VESDA-E VEA Rotary Valve MkII Spare
- VSP-975 — VESDA-E VEA-040-A00 LED Front Cover Spare
- VSP-976 — VESDA-E VEA-040-A10 LCD Front Cover Spare
- VSP-977 — VESDA-E VEA Filter Box of 10 Spare
- VSP-978 — VEA Sample Point Head Removal Key
- VSP-979 — VEA M/bore Tube Cutter 3 Pack
- VSP-980-B — VESDA-E VEA 6mm Standard Sampling Point Black
- VSP-980-B22 — VESDA-E VEA 6mm Standard Sampling Point (22) Black
- VSP-980-ST — VESDA-E SS SPL PT VEA
- VSP-980-W — VESDA-E VEA 6mm Standard Sampling Point White
- VSP-980-W22 — VESDA-E VEA 6mm Standard Sampling Point (22) White
- VSP-981-B — VESDA-E VEA 4mm Standard Sampling Point Black
- VSP-981-B22 — VESDA-E VEA 4mm Standard Sampling Point (22) Black
- VSP-981-W — VESDA-E VEA 4mm Standard Sampling Point White
- VSP-981-W22 — VESDA-E VEA 4mm Standard Sampling Point (22) White
- VSP-982-B — VESDA-E VEA 6mm Surface Mount Sampling Point Black
- VSP-982-B22 — VESDA-E VEA 6mm Surface Mount Sampling Point Pk of 22 Black
- VSP-982-W — VESDA-E VEA 6mm Surface Mount Sampling Point White
- VSP-982-W22 — VESDA-E VEA 6mm Surface Mount Sampling Point Pk of 22 White
- VSP-983-B — VESDA-E VEA 4mm Surface Mount Sampling Point Black
- VSP-983-B22 — VESDA-E VEA 4mm Surface Mount Sampling Point Pk of 22 Black
- VSP-983-W — VESDA-E VEA 4mm Surface Mount Sampling Point White
- VSP-983-W22 — VESDA-E VEA 4mm Surface Mount Sampling Point Pk of 22 White
- VSP-990-330 — VESDA-E VEA 6mm Microbore Tube UL-compliant Plenum-rated (330ft)
- VSP-990-NYLON-BLK — VEA 6mm Microbore Nylon Black 100m
- VSP-991 — VESDA-E VEA 4mm Microbore Tube 500ft UL Compliant - reel of 150m
- VSP-998 — VESDA-E VEA 6mm Blanking Plug (50)
- VSR-0000 — Sub-rack with 4 blanks
- VSR-0031 — Sub-rack with 2 x blank plates, VESDAnet socket and a programmer
- VSR-2200 — Sub-rack with 2 x VEP Displays with 2 x blanking plates
- VSR-2220 — Sub-rack with 3 x VEP Displays with 1 x blanking plate
- VSR-2222 — Sub-rack with 4 VEP displays
- VSRPT-CABLES — Ribbon Cables for Vigilon Repeats
- VSRPT-IDOOR-PLUS — Vigilon EN54 Repeat Panel Inner Door Assembly (supplied in Black)
- VSRPT-MRC — Vigilon Repeat Panel MRC for repeats pre-2007 (BS & EN)
- VSRPT-MRC-72 — Replacement MRC for new repeat, A3 & A2 mimic (BS & EN)
- VSRPT-ODOOR — Vigilon EN54 Repeat Panel Outer Door Assembly (supplied in Grey)
- VSRPT-SPARE — Spares Pack for Vigilon Repeat Panel
- VSW-206 — First PC licence
- VSW-216 — Additional PC licence / PC
- VSW-346 — VESDAnet network connection
- VSW-356 — VESDAnet Detector Connection per detector
- VSW-366 — VESDAtalk/VESDAlink Detector Connection
- VSW-501 — Text to speech (add voice message)
- VSW-600 — Remote Notification by Email
- VTT-10000-UK — Test Transformer (Wire Burn)
- W1A-R470SF-G017-01 — Weatherproof MCP 470 Ohms, Glass (supplied with back box)
- W1A-R470SG-K013-81 — Intrinsically safe outdoor call point, 470 ohm.
- W1A-R470SG-STCK-01 — Surface outdoor call point with 470 Ohm resistor and N.O. contact. Complete with glass. (Old PN: WCP1A-R470SG-01)
- W5A-RP01SG-K013-01 — Addressable waterproof call point, no Isolator, IP 67 (Old PN: WCP5A-RP01SG-01)
- W5A-RP02SG-K013-01 — Addressable waterproof call point c/w Isolator, IP 67 (Old PN: WCP5A-RP02SG-01)
- WB-1AP — Wet base shroud for use with standard bases to allow condensation run off and rear seal. Conduit entry only. Pure White Body
- WINMAG-LARGE — WINMAG basic package for up to 150 panels
- WINMAG-MEDIUM — WINMAG basic package for up to 30 panels
- WINMAG-SMALL — WINMAG basic package for up to 10 panels
- WM1001 — WM1001
- WM2010 — None WINMAG plus basic package
- WM2010.01 — WINMAG 8 base package 500. Gent Licence provides 7,500 data points.
- WM2020 — WM2020
- WM2020.01 — WINMAG 8 base package 1500. Gent Licence provides 22,500 data points.
- WM2030 — None WINMAG plus basic package
- WM2030.01 — WINMAG 8 base package 2500. Gent Licence provides 37,500 data points.
- WM2040 — None WINMAG plus basic package
- WM2040.01 — WINMAG 8 base package 10000. Gent Licence provides 150,000 data points.
- WM2050 — None WINMAG plus basic package
- WM2050.01 — WINMAG 8 base package 20000. Gent Licence provides 300,000 data points.
- WM2060 — None WINMAG plus basic package
- WM2060.01 — WINMAG 8 base package 50000. Gent Licence provides 750,000 data points.
- WM2110 — None Data point extension for base package
- WM2110.01 — WINMAG 8 Additional 500. Gent Licence provides additional 7,500 data points.
- WM2120 — WM2120
- WM2120.01 — WINMAG 8 Additional 2500. Gent Licence provides additional 37,500 data points.
- WM2130 — None DATA POINT EXTENTIONS FOR BASE PACKAGE
- WM2130.01 — WINMAG 8 Additional 5,000. Gent Licence provides additional 75,000 data points.
- WM2140 — None Data point extension for base package
- WM2140.01 — WINMAG 8 Additional 10,000 data points
- WM2200 — None WINMAG plus Client package (under section '2.3 WINMAG plus CLIENT PACKAGES')
- WM2200.01 — WINMAG 8 Client - single license
- WM2210 — None WINMAG Client – licenses, 5 pcs
- WM2210.01 — WINMAG 8 Client - licenses 5 pcs
- WM2220 — WM2220
- WM2220.01 — WINMAG 8 Client - licenses, 10 pcs
- WM2230 — None WINMAG plus CLIENT PACKAGES
- WM2230.01 — WINMAG 8 Client - licenses, 25 pcs
- WM2310 — WINMAG 8 upgrade to newest version. 2500 Data Points.
- WM2320 — WINMAG 8 upgrade to newest version. 10,000 Data Points.
- WM2330 — WINMAG 8 upgrade to newest version. 20,000 Data Points.
- WM2340 — WINMAG 8 upgrade to newest version. 50,000 Data Points.
- WM2348E — Single terminal back box for mounting RTS151KEY
- WM3120 — None WINMAG plus program option (ordered separately to upgrade the basic program)
- WM3120.01 — WINMAG 8 Option Fire system Gent
- WM3130 — None Program option for WINMAG plus (ordered separately to upgrade the basic program)
- WM3130.01 — WINMAG 8 Option Fire system Notifier
- WM3140 — WM3140
- WM3140.01 — WINMAG 8 Option Variodyn D1
- WM4030 — None Option Multi-Monitor
- WM4030.01 — WINMAG 8 Option Multi-Monitor
- WM4040 — WM4040
- WM4040.01 — WINMAG 8 Option Auto-CAD®
- WM4120 — WM4120
- WM4120.01 — WINMAG 8 Option Notification
- WM4130 — WM4130
- WM4130.01 — WINMAG 8 Option Escalation
- WM5100 — None OPC AND BACNET
- WM5100.01 — WINMAG 8 OPC Server
- WM5200 — None OPC AND BACNET
- WM5200.01 — WINMAG 8 OPC Client
- WM5300 — WM5300
- WM5300.01 — WINMAG 8 OPC/BACnet 500 Tags
- WM5600 — None OPC AND BACNET
- WM5600.01 — WINMAG 8 plus BACnet Server
- WM5700 — WM5700
- WM5700.01 — WINMAG 8 plus BACnet Client
- WM5800 — WM5800
- WM5800.01 — WINMAG 8 Software universal gateway for PC
- WPW — Addressable sealed deep base for detector and AV. Pure White Body
- WRA-PC-I00 — Body Colour - White Flash - Red Lens - Clear Isolator - Yes Wall Sounder VAD - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with Visual Alarm Device (VAD), EN54-23 W & O class compliant. EN 54-23 COVERAGE STANDARD OUTPUT MODE: W-3.6-10.5, W-2.4-10.5 EN 54-23 COVERAGE HIGH OUTPUT MODE: W-4.2-11.5, W-2.4-11.5 EN 54-23 COVERAGE LEGACY MODE: O-2.4-3
- WRA-RC-I00 — Body Colour - Red Flash - Red Lens - Clear Isolator - Yes Wall Sounder VAD - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with Visual Alarm Device (VAD), EN54-23 W & O class compliant. EN 54-23 COVERAGE STANDARD OUTPUT MODE: W-3.6-10.5, W-2.4-10.5 EN 54-23 COVERAGE HIGH OUTPUT MODE: W-4.2-11.5, W-2.4-11.5 EN 54-23 COVERAGE LEGACY MODE: O-2.4-3
- WRL-PC-I00 — Body Colour - White Flash - Red Lens - Clear Isolator - Yes Wall VAD - Wall-mounted, addressable, with Visual Alarm Device (VAD), EN54-23 W class compliant. EN 54-23 COVERAGE: W-3.6-10.5, W-2.4-10.5
- WRL-RC-I00 — Body Colour - Red Flash - Red Lens - Clear Isolator - Yes Wall VAD - Wall-mounted, addressable, with Visual Alarm Device (VAD), EN54-23 W class compliant. EN 54-23 COVERAGE: W-3.6-10.5, W-2.4-10.5
- WRR — Addressable sealed deep base for detector and AV. Red
- WSO-PP-I00 — White, c/w isolator, Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.
- WSO-PP-N00 — White, no Isolator. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, Not isolated
- WSO-PR-I00 — Red c/w Isolation. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.
- WSO-PR-N00 — Red, no Isolator. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.
- WSO-RR-RF — Agile Wireless Wall Mounted Addressable Sounder - RED for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- WSO-WW-RF — Agile Wireless Wall Mounted Addressable Sounder - WHITE for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- WSS-PC-N00 — Red Flash, Pure White Body, Clear Lens, non-Isolated. Wall Sounder Strobe - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with Visual Alarm Device (VAD), EN54-23 O class compliant (W-1.9-1.9).
- WSS-PR-I00 — Red Flash, Pure White Body, Red Lens c/w Isolation. Wall Sounder VID - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with visual indicating device (VID). This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire
- WSS-PR-N00 — Red Flash, Pure White Body, Red Lens, no Isolator. Wall Sounder - Addressable loop powered base sounder, EN54-3 approved, with visual indicating device (VID). This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire.
- WST-PC-N00 — Red Flash, Pure White Body, Clear Lens, non-Isolated. Wall VAD - Wall mounted, addressable loop powered EN54-23 O class compliant (W-1.68-1.68).
- WWA-PC-I00 — Body Colour - White Flash - White Lens - Clear Isolator - Yes Wall Sounder VAD - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with Visual Alarm Device (VAD), EN54-23 W & O class compliant. EN 54-23 COVERAGE STANDARD OUTPUT MODE: W-3.8-9, W-2.4-9 EN 54-23 COVERAGE HIGH OUTPUT MODE: W-4-11.5, W-2.4-11.5 EN 54-23 COVERAGE LEGACY MODE: O-2.4-3
- WWA-RC-I00 — Body Colour - Red Flash - White Lens - Clear Isolator - Yes Wall Sounder VAD - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with Visual Alarm Device (VAD), EN54-23 W & O class compliant. EN 54-23 COVERAGE STANDARD OUTPUT MODE: W-3.8-9, W-2.4-9 EN 54-23 COVERAGE HIGH OUTPUT MODE: W-4-11.5, W-2.4-11.5 EN 54-23 COVERAGE LEGACY MODE: O-2.4-3
- WWL-PC-I00 — Body Colour - White Flash - White Lens - Clear Isolator - Yes Wall VAD - Wall-mounted, addressable, with Visual Alarm Device (VAD), EN54-23 W class compliant. EN 54-23 COVERAGE: W-3.8-9, W-2.4-9
- WWL-RC-I00 — Body Colour - Red Flash - White Lens - Clear Isolator - Yes Wall VAD - Wall-mounted, addressable, with Visual Alarm Device (VAD), EN54-23 W class compliant. EN 54-23 COVERAGE: W-3.8-9, W-2.4-9
- XCL-COVER — VESDA Sensepoint XCL Sensor Cover with Gasket
- XCL-FILTER — VESDA Sensepoint XCL Replacement Filter - Pack of 10
- XCL-LB-CAP — XCL Spare Flow Cap
- XCL-LB-CH4-RA — XCL Flammable 100 %LEL, (4-20mA Relays)
- XCL-LB-CH4-RM — XCL Flammable 100 %LEL, (Modbus & Relays)
- XCL-LB-CO-RA — XCL Carbon Monoxide (C0) 0-300PPM (4-20mA Relays)
- XCL-LB-CO-RM — XCL Carbon Monoxide (C0) 0-300PPM (Modbus & Relays)
- XCL-LB-CO2PP-RA — XCL Carbon Dioxide (CO2) 5,000ppm (4-20mA Relays)
- XCL-LB-CO2PP-RM — XCL Carbon Dioxide (CO2) 5,000ppm (Modbus & Relays)
- XCL-LB-CO2VV-RA — XCL Carbon Dioxide (CO2) 5.0%V/V (4-20mA Relays)
- XCL-LB-CO2VV-RM — XCL Carbon Dioxide (CO2) 5.0%V/V (Modbus & Relays)
- XCL-LB-COV-1 — XCL Spare Sensor Cover - LEL, NH3 & CO2
- XCL-LB-COV-2 — XCL Spare Sensor Cover - CO, O2, H2S, H2 & NO2
- XCL-LB-ELB — XCL Large Bore 60° Pipe Elbow Pack of 4
- XCL-LB-FLT-1 — XCL Spare Filter - LEL, NH3 & CO2 - pack of 10
- XCL-LB-FLT-2 — XCL Spare Filter - CO, O2, H2S, H2 & NO2 - pack of 10
- XCL-LB-H2-RA — XCL Hydrogen (H2) 1,000ppm (4-20mA Relays)
- XCL-LB-H2-RM — XCL Hydrogen Hydrogen (H2) 1,000ppm (Modbus & Relays)
- XCL-LB-H2S-RA — XCL Hydrogen Sulphide (H2S) 50ppm (4-20mA Relays)
- XCL-LB-H2S-RM — XCL Hydrogen Sulphide (H2S) 50ppm (Modbus & Relays)
- XCL-LB-NH3-RA — XCL Ammonia (NH3) 100ppm (4-20mA Relays)
- XCL-LB-NH3-RM — XCL Ammonia (NH3) 100ppm (Modbus & Relays)
- XCL-LB-NO2-RA — XCL Nitrogen Dioxide (NO2) 20ppm (4-20mA Relays)
- XCL-LB-NO2-RM — XCL Nitrogen Dioxide (NO2) 20ppm (Modbus & Relays)
- XCL-LB-O2-RA — XCL Oxygen (O2) 0 to 25 %v/v, (4-20mA Relays)
- XCL-LB-O2-RM — XCL Oxygen (O2) 0 to 25 %v/v, (Modbus & Relays)
- XCL-M20-CG — VESDA Sensepoint XCL Cable Glands - Pack of 10
- XCL-SC-CH4 — XCL Sensor-Flam Catalytic
- XCL-SC-CO2PP — VESDA RPL SENS CO2 5000PPM SP XCL
- XCL-SC-CO2VV — VESDA RPL SENS CO2 5% V/V SP XCL
- XCL-SC-H2S — XCL/XRL Replacement Sensor Hydrogen Sulphide (H2S)
- XCL-SC-NH3 — XCL/XRL Replacement Sensor-Ammonia (NH3)
- XCL-SC-NO2 — XCL/XRL Replacement Sensor-Nitrogen Dioxide (NO2)
- XCL-SC-O2 — XCL/XRL Replacement Sensor-O2
- XCL-VEA-CAL — VESDA Sensepoint XCL Calibration/Flow Cap for VEA
- XCL-VEA-CH4-RA — VESDA CH4 0-100%LEL 4-20mA REL XCL VEA
- XCL-VEA-CH4-RA-5 — VESDA CH4 0-100%LEL 4-20mA REL XCL VEA Pack of 5
- XCL-VEA-CH4-RM — VESDA CH4 0-100%LEL MODBUS REL XCL VEA
- XCL-VEA-CO-RA — VESDA CO 300PPM 4-20mA REL VEA
- XCL-VEA-CO-RA-5 — VESDA CO 300PPM 4-20mA REL XCL VEA Pack of 5
- XCL-VEA-CO-RM — VESDA CO 300PPM MODBUS REL XCL VEA
- XCL-VEA-CO2PP-RA — VESDA CO2 5000PPM 4-20mA REL XCL VEA
- XCL-VEA-CO2PP-RM — VESDA CO2 5000PPM MODBUS REL XCL VEA
- XCL-VEA-CO2VV-RA — VESDA CO2 5% V/V 4-20mA REL XCL VEA
- XCL-VEA-CO2VV-RM — VESDA CO2 5% V/V MODBUS REL XCL VEA
- XCL-VEA-H2-RA — VESDA H2 1000PPM 4-20mA REL XCL VEA
- XCL-VEA-H2-RA-5 — VESDA H2 1000PPM 4-20mA REL XCL VEA Pack of 5
- XCL-VEA-H2-RM — VESDA H2 1000PPM MODBUS REL XCL VEA
- XCL-VEA-TUB — VESDA Sensepoint XCL Tubing Interface for VEA
- XCL-XRL-SC-CO — XCL/XRL Replacement Sensor - Oxygen (O2)
- XCL-XRL-SC-H2 — XCL/XRL Replacement Sensor Hydrogen (H2)
- XEN-FFR — Fire Fault Relay Unit
- XENS-FLAP — Replacement Mouldings and Cover Plates
- XENS-SPARE — Spares pack for Xenex Panels