Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Sales 01509 648840
FireAgent
Basket (0)

Part Number or the Week S3EP-V-VAD-HPR-R

VESDA-E VEA 6mm Surface Mount Sampling Point Pk of 22 White

Part no.VSP-982-W22
BrandVESDA
RangeVESDA VEA
Sub-rangeVEA Sampling
VESDA VSP-982-W22 VEA 6mm Surface Mount Point — chrome dome, red VESDA logo ring, spiral centre and side port

Image for illustration; item supplied may differ

At a glance

  • 6mm Surface Mount PointVSP-982-W22 is a VESDA-E VEA 6mm Surface Mount Sampling Point.
  • Pack Quantity of 22There are 22 sampling points in the pack.
  • Screwed To The CeilingThese sampling points are screwed directly to the ceiling.
  • Limited Ceiling Void AccessThey are designed for positions in which ceiling void access is limited.
  • Tubes Along The CeilingTheir microbore tubes run along the ceiling, where they stay visible in the protected area.
  • Servicing Time CutAgainst typical spot detection solutions, VEA system servicing and maintenance time is reduced by 90%.
  • Detector Supervision Of PointsEvery point in the pack is fully supervised by the detector.
  • 6mm Inlet For Microbore TubesIts 6mm inlet suits appropriate microbore tubes.
DescriptionSpecificationsOptional accessories

Description

The 6mm inlet suits appropriate microbore tubes, and each point is screwed directly to the ceiling. There are 22 in the pack, all patented VEA sampling points. A VESDA-E VEA series detector uses patented air sampling points together with multiple microbore air-sampling tubes.

Because ceiling void access is limited where these points are used, the tubes are taken along the ceiling and remain in view within the protected area. Every point is fully supervised by the detector, and VEA system servicing and maintenance time comes down by 90% next to typical spot detection solutions.

Read the full technical description

VSP-982-W22 is a pack of 22 surface mount sampling points with a 6mm inlet, from the VESDA-E VEA family. These sampling points are screwed directly to the ceiling, and each one is a patented VEA sampling point. They are designed for positions in which ceiling void access is limited. Their microbore tubes run along the ceiling, where they stay visible in the protected area. Every point in the pack is fully supervised by the detector. Against typical spot detection solutions, VEA system servicing and maintenance time is reduced by 90%.

Specifications

Ordering codeVSP-982-W22
DescriptionVESDA-E VEA 6mm Surface Mount Sampling Point (pack of 22)
Sampling point typeSurface Mount Sampling Point
Inlet size6mm
Colourwhite
Pack quantitypack of 22
MountingMicrobore tubes are run along the ceiling, visible in the protected area; these sampling points are screwed directly to the ceiling
Application use caseDesigned for use where access to the ceiling void is limited
SupervisionEach patented VEA sampling point and microbore tube is fully supervised by the detector
Maintenance benefitEnd to end supervision combined with system integrity monitoring reduces VEA system servicing and maintenance time by 90% compared to typical spot detection solutions
Automated cleaningAutomated cleaning by the detector
Swivel jointSwivel joint to allow optimum tube orientation
Tube compatibilityModels to suite 6mm and 4mm microbore tubes
Doc referenceDoc. No. 29730_03 Part No. 30732 September 2024

Specifications per manufacturer documentation, subject to change. E&OE.

Optional accessories