Morley DXc Panels

The Morley DXc Panels range covers single, two and four loop addressable control panels (DXc1, DXc2, DXc4) supporting Apollo, System Sensor and Hochiki protocols, with two sounder circuits and 230Vac operation. The range also includes loop expansion cards, 40/80 zone LED cards, extension boxes and covers, flush bezel and rack mount kits, key switch and custom key plate kits, replacement doors, network, RS232 and EN54-13 I/O cards, and an EN54-4 compliant extension PSU backbox.

31 products

020-773

Routing Termination Unit 1 (RTU01). Use on the Fault Routing output on the 795-132 to allow full monitoring of the transmission path to transmission device. Allows compliance with EN54-2 OWR 8.9

£146.63

ex VAT

£175.96 inc VAT

Routing Termination Unit 1 (RTU01). Use on the Fault Routing output on the 795-132 to allow full monitoring of the transmission path to transmission device. Allows compliance with EN54-2 OWR 8.9

DXc1 Single loop panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.

DXc2 2 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).

DXc4 4 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).

Keyswitch kit. Keyswitch and 2x keys to mount into DX series control panels. Used for Level 2 access, class change and control of functions

Spare keys for 795-083 - Pack of 5

DXc Software programming kit (SPK) supports System Sensor, Apollo and Hochiki protocols

Kit DXc Network Card, In order to connect panels together to create a network a DXc Network card must be fitted to each panel

DXc Extension Box Cover Blank For Extension Box

40 Zone LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door

DXc Extension cover, comes with 80 zone LED card

DXc replacement door for DXc control panels. The spare door fits all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, facia label, ribbon cable and lock.

DXc1 Spare Power supply unit (PSU) for 1 loop panel

DXc2/4 Spare Power supply unit (PSU) 2/4 loop panel

DXc replacement text inserts, pack includes all text inserts/slide-in labels including both blank and numbered labels for Zone LEDs. Pack also includes the User Reference Guide and the Quick Start Manual

DXc 1 loop base card - Apollo, System Sensor and Hochiki protocols

DXc 2 loop base card - Apollo, System Sensor and Hochiki protocols

DXc 2 loop base card - Morley Protocol

DXc 2 Loop Expansion Card for use with the DXc4 only

Flush bezel kit for DXc1 (small enclosure)

Flush bezel kit for DXc 2/4 (medium enclosure)

Flush bezel kit for DXc 1 with the extension backbox fitted (small enclosure)

Flush bezel kit for DXc 2/4 with the extension backbox fitted (medium enclosure)

DXc key switch kit, Control panels can be fitted with an optional key switch kit fitted by removing the existing label and replacing with a new label supplied with the kit. The flying lead (fitted with a plug) pushes on to the two pins situated at the bottom of the main display PCB

Rack Mount Bracket for DXc2/4

DXc RS232 Card allows the connection of a serial device to the panel such as BMS system or our Visuleyez product range

80 ZONE LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door