Product type
Panels
Every panel range we
stock, across 6 brands — ex-VAT trade pricing, EN54 compliance data and live stock on every
part.
14 ranges · 269 SKUsAll categories →
Conventional
117Wireless
24All panels (269)
Gent by Honeywell
Vigilon Plus
- VIGPLUS-24 — 1 to 4 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in Black.
- VIGPLUS-24-NP — 1 to 4 Loop Vigilon Plus Control Panel without printer c/w 1 loop card & supplied in black.
- VIGPLUS-72 — 1 to 6 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in black.
- VIGPLUS-72-NP — 1 to 6 Loop Vigilon Plus Control Panel without printer c/w 1 loop card & supplied in black.
- VIG-BNG — BACnet Gateway Assembly for Vigilon & Compact
- VIG-BNG-RW — BACnet Gateway Assembly for Vigilon & Compact with Controls & Command Builds
- VIG-BNG-DINKIT — BACnet Gateway Din Rail Mounting Kit for Mains powered interfaces S4-344402/12
- VS-BATTBOX-72 — Battery Box for VIGPLUS-72 & VIGPLUS-72-NP.
- VS-FILTER-72 — Battery Filter PCBa/Cable For VIGPLUS-72
- VS-BATT-CABLE — Battery Lead Pack For VIGPLUS-72
- VIG-NC-FO — Fibre Optic Network Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54 & V3+)
- VIG-24-FLUSH — Flush Surround (Main Control Panel and Terminal Node)
- VIG-IOC-DOM — Input/Output Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIG-LPC-EN — Loop Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIGPLUS-MCC — MCC Control Card for VIGPLUS-24 & VIGPLUS-72 (EN54) C/W Micro SD flash memory card
- VIG-NC — Network Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIG-NPORT-100 — NPORT 100 - RS232 to IP device (single unit 2 required per link)
- VS-ODOOR-PLUS — Outer Door for VIGPLUS-24 & VIGPLUS-72 (supplied in Black)
- VS-PROLL — Printer Roll For Vig & 34000
- VIG-19-RACK — Rack Mounting Frame for VIGPLUS-24 in a 19" Rack
- VS-BPLANE — Replacement Backplane PCB for Vigilon Panels (VIGPLUS, VIGPLUS-24, VIGPLUS-72)
- VS-IDOOR-PLUS — Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 (supplied in Black)
- VS-ODLOCK — Replacement Lock for Vigilon Outer Door
- VS-PRIN — Replacement Printer Assembly for Vigilon Panels
- VS-PSU-24 — Replacement PSU for VIG1-24
- VS-PSU-72 — Replacement PSU for VIG1-72
- VS-CABLE-24 — Replacement Ribbon Cables For VIGPLUS-24 and VIGPLUS-72 Panel
- VS-SPARE-24 — Replacement Spares Pack for Vigilon Control Panels - VIGPLUS-24 & VIGPLUS-72
- VIG-NC-DOM-FO — Secure Domain Bridge Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54 & V3+)
- VIG-NC-SMF — SMF Network Card
- VS-KEY — Spare Key for Vigilon and Compact Outer Door (Pack of 10)
- VIG-DOOR-SS — Stainless Steel Door for Vigilon Main Control Panel
- VIG72-UPGR — Upgrade Kit to convert Vigilon 24 to Vigilon 72. Batteries not included - requires 4 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations. Also requires additional Battery Enclosure VS-BATTBOX-72.
- VIG-COMM-LEAD — USB Commissioning Lead and Dongle
- VS-IDOOR-SCREW — Vigilon & Compact Inner Door Screw and Fastener, Pack of 10
- VS-ODOOR — Vigilon Compact 24hr Outer Door Assembly (supplied in Grey)
- VS-LSIM — Vigilon loop simulator
- VIG-FLUSH-SS — Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
- VIGPLUS-NODE — Vigilon Plus Terminal Node (EN54 version) for use with multiple IO cards and Fibre networks. Supplied in black.
- VS-BATT-PCB — Vigilon Replacement Battery Box PCB
- VS-TCARD — Vigilon Replacement Terminal Card
Compact Plus
- COMPACT-LPC-EN — Additional Loop card (2km) for COMPACT-24-N
- VCS-ODOOR-PLUS — Compact Plus Outer Door Assembly (supplied in Black)
- COMPACT-NODE — Compact Plus Terminal Node for Vigilon networks supplied in black.
- COMPACT-FLUSH — Control Panel Flush Surround (supplied in Black)
- PRINTER-HAND — Hand Held Printer - Thermal Type 58mm
- COMPACT-FLUSH-SS — Main Control Panel Stainless Steel Flush Mounting Kit
- COMPACT-NC — Network Card for Vigilon Compact (EN Networks only)
- VCS-IDOOR-PLUS — Replacement Inner Door Assembly for Compact Plus and Compact-24 Panel (supplied in Black)
- VCS-MCB-PLUS — Replacement Main Control PCB for Compact Plus Control Panel
- VCS-PSU-N — Replacement PSU for Compact Control Panel
- PRINTER-H-PAPER — Spare Paper Roll - 58mm
- VCS-CABLES — Spare Ribbon Cable set for Compact Panel
- VCS-SPARE — Spares pack for Vigilon Compact (Fuses, Battery leads etc.)
- VCS-ODOOR — Vigilon Compact 24hr Outer Door Assembly (supplied in Grey)
- COMPACT-PLUS — Vigilon Compact Plus 1-2 loop Control Panel c/w 1 loop card & supplied in black.
Vigilon Plus Mimics & Repeats
- VIG-MIM-A3 — A3 Zonal and Graphic Mimic BS & EN compatible supplied in grey.
- S4-34494 — Connection convertor for S4-34412 and S4-34600 (26 core ribbon to Terminal block)
- S4-34600 — LED Driver Board for special Mimics
- VIG-RPT-FLUSH — Repeat Panel Flush Surround
- VSRPT-MRC-72 — Replacement MRC for new repeat, A3 & A2 mimic (BS & EN)
- VSRPT-CABLES — Ribbon Cables for Vigilon Repeats
- VSRPT-SPARE — Spares Pack for Vigilon Repeat Panel
- VIG-RPT-DOOR-SS — Stainless Steel Door for Vigilon Repeat
- VIG-RPT-FLUSH-SS — Stainless Steel Repeat Panel Flush Mounting Kit
- VSRPT-IDOOR-PLUS — Vigilon EN54 Repeat Panel Inner Door Assembly (supplied in Black)
- VSRPT-ODOOR — Vigilon EN54 Repeat Panel Outer Door Assembly (supplied in Grey)
- VIGPLUS-RPT — Vigilon Plus Repeat Panel supplied in black. Batteries not included - requires 2 x 4015-501-YFR (Power Sonic Flame Retardant 12V 7Ah) to meet compliance regulations.
Morley Addressable Panels
Morley ZXSe Panels
- 796-177 — 2 Amp PSU for post-Jan 2010 ZX1Se/2Se. PSU only this part does not come with chassis plate
- 796-170 — 2 loop base card for ZX2Se
- 795-077-020 — 20 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 40
- 795-014 — 4-way, Programmable Output Relay Module, PCB only. Requires 24 Vdc supply and an RS485 card to be fitted in the control panel
- 795-015 — 4-way, Programmable Sounder Module, PCB only. Requires 24 Vdc supply and an RS485 card to be fitted in the control panel
- 796-162 — 5 loop base PCB for ZX5e/ZX5Se
- 795-077-060 — 60 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 80
- 020-600-002 — Bezel kit for Active or Passive repeaters. Semi-flush mounting, 218 x 307 mm (H x W)
- 795-038-001 — Hi-485 communication module, PCB only. Requires an RS485 card to be fitted in the control panel
- 795-051-001 — Internal Printer for use with ZX5Se panels.
- 797-076 — L' shaped mounting bracket to fit peripheral PCB's into Zxe/ZX5e/ZXSe
- 020-825 — Lock and key for ZX series control panels
- 795-066-100 — Loop driver card for Apollo Discovery or XP95 protocols, 460mA
- 795-058-105 — Loop driver card for Hochiki ESP protocol, 460mA
- 795-068-100 — Loop driver card for ZX panels, System Sensor protocol, 460mA
- 796-045 — Micro processor pcb (CPU) for ZX series control panels. Supplied without software
- 795-057 — MODBUS interface module. Requires an RS485 card to be fitted in the control panel
- 709-601-001 — Morley-IAS Active Repeater. Silence, Mute, Reset, Accept, Evacuate and Test Controls. Requires 24 Vdc supply and a RS485 card when used with a ZX control panel. 165 x 254 x 50mm (H x W x D)
- 709-701-001 — Morley-IAS Passive Repeater. Requires 24 Vdc supply and a RS485 card when used with a ZX control panel. 165 x 254 x 50mm (H x W x D)
- 020-891 — Morley-IAS USB Upload/Download Lead. The lead provides the interface between a PC and any Morley-IAS fire alarm control panel
- 796-017 — Printer paper roll and printer ribbon forZXe/ZXSe internal printer. (795-051-001)
- 020-820 — Replacement printer paper roll
- 796-180 — Retrofit PSU & base card PCB kit
- 795-005 — RS 232 communication module
- 795-004-001 — RS 485 Communication module
- 795-045 — RS485 to RS232 converter
- 796-171 — Single loop base PCB for ZX1Se
- 795-016 — Sounder booster PSU. Enclosure comprising 24Vdc PSU/Charger and single sounder circuit controller. 500 x 500 x 180mm (H x W x D)
- 797-021 — Spare key for ZX series control panels. Quantity 1
- 020-835 — Spare key switch and keys (901) for Morley repeaters 709-601-001
- 796-178 — Spare PSU for ZX5Se post-Jan 2010. PSU only this part does not come with chassis plate
- 796-042 — Thermal printer paper roll for ZX External printer 795-060-002
- 796-706 — ZX Series V7.06 replacement software (set of two EPROMS)
- 796-845 — ZX Series V8.45 replacement software (set of two EPROMS)
- 796-855 — ZX Series V8.55 replacement software (set of two EPROMS)
- 796-860 — ZX Series V8.60 replacement software (set of two EPROMS)
- 797-077 — ZX1(S)e & 2(S)e Battery box or mounting enclosure. Size 400 x 400 x 135mm (H x W x D)
- 797-061 — ZX1(S)e/ZX2(S)e Bezel kit. Semi-flush mounting kit for ZX1(S)e or ZX2(S)e control panel. Bezel dimensions 450 x 450 mm (H x W)
- 795-136 — ZX1/2SE Back Box. Includes the metal work only
- 795-141 — ZX1/2SE Door. Metal work only
- 796-183 — ZX1/2Se Retrofit 4 line display kit including display plate and overlay
- 796-175 — ZX1/2Se retrofit PSU kit including chassis
- 797-063 — ZX1SE and ZX2Se Glass Door Kit, comprises a new inner door and plexiglass window allowing controls to protected and recessed within the existing enclosure
- 722-001-301 — ZX1Se single loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , not expandable
- 720-001-301 — ZX2Se 1-2 loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , not expandable
- 796-184 — ZX2Se retrofit PSU & base card PCB kit
- 797-078 — ZX5(S)e Battery box or mounting enclosure. Size 500 x 500 x 185mm (H x W x D)
- 721-001-140 — ZX5Se 1-5 loop 140 Zone LED control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. supplied with 140 Zone led's
- 721-001-200 — ZX5Se 1-5 loop 200 Zone LED control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. supplied with 200 Zone LED's
- 721-002-301 — ZX5Se 1-5 loop control panel complete with Stainless Steel door and bezel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , expandable to 40 or 80 with part numbers 795-077-020 or 795-077-060
- 721-001-301 — ZX5Se 1-5 loop control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , expandable to 40 or 80 with part numbers 795-077-020 or 795-077-060
- 795-137 — ZX5SE Back Box. Metal work only
- 797-062 — ZX5Se Bezel kit. Semi-flush mounting kit for ZX5(S)e control panel. Bezel dimensions 550 x 550mm (H x W)
- 795-142 — ZX5SE Door. Metal work only
- 797-064 — ZX5Se Glass Door Kit, comprises a new inner door and plexiglass window allowing controls to protected and recessed within the existing enclosure
- 796-181 — ZX5Se Retrofit 4 line display including display plate and overlay
- 796-176 — ZX5Se retrofit PSU kit including chassis
- 795-066 — ZXe Loop driver card for Apollo Discovery or XP95 protocol
- 795-048 — ZXe Loop driver card for Apollo Series 90 or XP95 protocol
- 795-058-005 — ZXe Loop driver card for Hochiki ESP protocol
- 795-072 — ZXe Loop driver card for Morley protocol
- 795-044-001 — ZXe Loop driver card for Nittan protocol
- 795-068 — ZXe Loop driver card for System Sensor protocol
Morley DXc Panels
- 795-102 — 40 Zone LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door
- 795-124 — 80 ZONE LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door
- 795-109-001 — DXc 1 loop base card - Apollo, System Sensor and Hochiki protocols
- 795-110-001 — DXc 2 loop base card - Apollo, System Sensor and Hochiki protocols
- 795-110-002 — DXc 2 loop base card - Morley Protocol
- 795-111 — DXc 2 Loop Expansion Card for use with the DXc4 only
- 795-101 — DXc Extension Box Cover Blank For Extension Box
- 795-121 — DXc extension Box increases the enclosure size of a DXc1, DXc2, or DXc4 control panel to accommodate larger batteries, relays or other equipment by fitting the extension back box, 263 x 390 x 147 (H x W x D).This Extension Box is supplied without covers. Two covers must be used with the box. Any combination of the three listed below can be used: 795-101, 795-103, 795-116
- 795-103 — DXc Extension cover, comes with 80 zone LED card
- 797-090 — DXc Extension EN54-4 compliant PSU backbox increases the enclosure size of a DXc2, or DXc4 control panel to accommodate an additional pair of 17Ah batteries to provide increased system battery standby of up to 34Ah at 24V(depending o the batteries fitted in the panel) . This unit is supplied with the backbox, two cover blanks and an additional power supply unit (PSU). 263 x 390 x 147 (H x W x D)
- 795-118 — DXc key switch kit, Control panels can be fitted with an optional key switch kit fitted by removing the existing label and replacing with a new label supplied with the kit. The flying lead (fitted with a plug) pushes on to the two pins situated at the bottom of the main display PCB
- 795-104 — DXc replacement door for DXc control panels. The spare door fits all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, facia label, ribbon cable and lock.
- 795-108-001 — DXc replacement text inserts, pack includes all text inserts/slide-in labels including both blank and numbered labels for Zone LEDs. Pack also includes the User Reference Guide and the Quick Start Manual
- 795-122 — DXc RS232 Card allows the connection of a serial device to the panel such as BMS system or our Visuleyez product range
- 795-097 — DXc Software programming kit (SPK) supports System Sensor, Apollo and Hochiki protocols
- 714-001-111 — DXc1 Single loop panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.
- 795-106 — DXc1 Spare Power supply unit (PSU) for 1 loop panel
- 714-001-221 — DXc2 2 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).
- 795-107 — DXc2/4 Spare Power supply unit (PSU) 2/4 loop panel
- 714-001-241 — DXc4 4 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).
- 795-114 — Flush bezel kit for DXc 1 with the extension backbox fitted (small enclosure)
- 795-113 — Flush bezel kit for DXc 2/4 (medium enclosure)
- 795-115 — Flush bezel kit for DXc 2/4 with the extension backbox fitted (medium enclosure)
- 795-112 — Flush bezel kit for DXc1 (small enclosure)
- 795-132 — For use with DXc1-M (714-001-214) & DXc2-M (714-001-224) only. I/O card for EN54-13 compliant sounder circuits, Fire Routing interface, Fault Routing interface and Fire Protection interface. Routing Termination units may be required depending on application. Allows compliance with EN54-2 OWR 7.9.1 and 7.9.2, OWR 7.10, OWR 8.9
- 795-083 — Keyswitch kit. Keyswitch and 2x keys to mount into DX series control panels. Used for Level 2 access, class change and control of functions
- 795-099 — Kit DXc Network Card, In order to connect panels together to create a network a DXc Network card must be fitted to each panel
- 795-120 — Rack Mount Bracket for DXc2/4
- 020-773 — Routing Termination Unit 1 (RTU01). Use on the Fault Routing output on the 795-132 to allow full monitoring of the transmission path to transmission device. Allows compliance with EN54-2 OWR 8.9
- 795-084 — Spare keys for 795-083 - Pack of 5
- 795-116 — The custom key plate cover is supplied with a painted metal plate. The metal plate can be removed and drilled to accept key switches or indicators and labelled accordingly by the installer. The custom key plate cover can be used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension backbox, part No. 795-121
Morley Max
- 5000.00.022 — MA-1000-01 Main conrtol board including display LCD - Region 1
- 5000.00.024 — MA-1000-03 Main conrtol board including display LCD - Region 3
- 5000.00.025 — MA-1000-XX Flat Ribbon Cable Kit
- 5000.00.026 — MA-1000-XX Front Door including screws. Ex PBC
- 5000.00.021 — MA-1000-XX PSU - Power Supply unit
- 5000.00.019 — MA-1000-XX User terminal board
- 5000.00.010 — MA-2000-01 Main conrtol board including display LCD - Region 1
- 5000.00.012 — MA-2000-03 Main conrtol board including display LCD - Region 3
- 5000.00.005 — MA-2000-XX & MA-8000-XX Flat Ribbon Cable Kit
- 5000.00.017 — MA-2000-XX & MA-8000-XX Front Door including screws. Ex PBC
- 5000.00.003 — MA-2000-XX & MA-8000-XX User terminal board
- 5000.00.007 — MA-2000-XX PSU - Power Supply unit
- 5000.00.013 — MA-8000-01 Main conrtol board including display LCD - Region 1
- 5000.00.015 — MA-8000-03 Main conrtol board including display LCD - Region 3
- 5000.00.016 — MA-8000-XX 3U Front battery Cover/Blank
- 5000.00.008 — MA-8000-XX PSU - Power Supply unit
- MA-LCD7 — Max 7" Touchscreen repeater/zonal mimic
- 5000.00.006 — Max Battery Cables & temperature probe
- E-SIB — Morley-IAS Max Communication dongle for CAN Bus & Serial TPP enablement (MA-2000 & MA-8000 only)
- MA-LIB2-01 — Morley-IAS Max dual Loop card for MA-8000. includes mounting fixtures
- MA-8000-03 — Morley-IAS Max four loop, expandable to eight (networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-8000-01 — Morley-IAS Max four loop, expandable to eight (networkable) For System Sensor & Apollo protocol
- MA-1BZL — Morley-IAS Max MA-1000 Bezel
- MA-2BZL — Morley-IAS Max MA-2000 Bezel
- MA-8BZL — Morley-IAS Max MA-8000 Bezel
- MA-1000-03 — Morley-IAS Max Single loop (non-networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-1000-01 — Morley-IAS Max Single loop (non-networkable) For System Sensor & Apollo protocol
- MA-2000-03 — Morley-IAS Max Stwo loop (networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-2000-01 — Morley-IAS Max two loop (networkable) For System Sensor & Apollo protocol
BS8629 Evacuation Alert System
EACIE Panel
- EACIE1 — Evac Smart EACIE 1 BS8629 Panel (12 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE2 — Evac Smart EACIE 2 BS8629 Panel (24 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE3 — Evac Smart EACIE 3 BS8629 Panel (36 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE4 — Evac Smart EACIE 4 BS8629 Panel (48 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
Conventional
Conventional Horizon Panels
- 020-772 — 4-way sounder output module (1.5A Max)
- 020-747 — 8-way input / output card. Provides up to 8 configurable relay outputs or up to 4 command inputs and 4 outputs
- 020-417 — Active end of line monitor module
- 020-743 — Capacitor kit for detectors not compatible with capacitive EOL monitoring. Includes 8 x 10µƒ capacitors. Active EOL's required - See part number 020-417
- 020-713 — Fire & fault relay module for NFS2-8
- 002-492-222 — HRZ-2e, 2 zone Non-Addressable fire alarm control panel. 2 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W xD)
- 002-492-242 — HRZ-4e, 4 zone Non-Addressable fire alarm control panel. 4 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W x D)
- 002-492-282 — HRZ-8e, 8 zone Non-Addressable fire alarm control panel. 8 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W x D)
- 020-745-008 — Spare installation kit. Includes 8 capacitive end of lines, battery leads, Allen key, panel controls key and sounder end of line resistors
- 020-865 — Spare red controls key - Pack of 10
Conventional Xenex Panels
- 13270-02LB — 2 Zone conventional panel, EN54 less batteries
- 13271-08LB — 8 Zone repeat indicator, less batteries
- XEN-FFR — Fire Fault Relay Unit
- 13270-29 — Flush Plate for 1-8 Panel and Repeat Panel Variants
- 13270-04LB — Gent 4 Zone conventional panel, EN54 less batteries
- 13270-08LB — Gent 8 Zone conventional panel, EN54 less batteries
- XENS-FLAP — Replacement Mouldings and Cover Plates
- XENS-SPARE — Spares pack for Xenex Panels
Graphics & Workstation
Winmag 8
- WM2140.01 — WINMAG 8 Additional 10,000 data points
- WM2120.01 — WINMAG 8 Additional 2500. Gent Licence provides additional 37,500 data points.
- WM2130.01 — WINMAG 8 Additional 5,000. Gent Licence provides additional 75,000 data points.
- WM2110.01 — WINMAG 8 Additional 500. Gent Licence provides additional 7,500 data points.
- WM2040.01 — WINMAG 8 base package 10000. Gent Licence provides 150,000 data points.
- WM2020.01 — WINMAG 8 base package 1500. Gent Licence provides 22,500 data points.
- WM2050.01 — WINMAG 8 base package 20000. Gent Licence provides 300,000 data points.
- WM2030.01 — WINMAG 8 base package 2500. Gent Licence provides 37,500 data points.
- WM2010.01 — WINMAG 8 base package 500. Gent Licence provides 7,500 data points.
- WM2060.01 — WINMAG 8 base package 50000. Gent Licence provides 750,000 data points.
- WM2210.01 — WINMAG 8 Client - licenses 5 pcs
- WM2220.01 — WINMAG 8 Client - licenses, 10 pcs
- WM2230.01 — WINMAG 8 Client - licenses, 25 pcs
- WM2200.01 — WINMAG 8 Client - single license
- WM5200.01 — WINMAG 8 OPC Client
- WM5100.01 — WINMAG 8 OPC Server
- WM5300.01 — WINMAG 8 OPC/BACnet 500 Tags
- WM4040.01 — WINMAG 8 Option Auto-CAD®
- WM4130.01 — WINMAG 8 Option Escalation
- WM3120.01 — WINMAG 8 Option Fire system Gent
- WM3130.01 — WINMAG 8 Option Fire system Notifier
- WM4030.01 — WINMAG 8 Option Multi-Monitor
- WM4120.01 — WINMAG 8 Option Notification
- WM3140.01 — WINMAG 8 Option Variodyn D1
- WM5700.01 — WINMAG 8 plus BACnet Client
- WM5600.01 — WINMAG 8 plus BACnet Server
- WM5800.01 — WINMAG 8 Software universal gateway for PC
- WM2320 — WINMAG 8 upgrade to newest version. 10,000 Data Points.
- WM2330 — WINMAG 8 upgrade to newest version. 20,000 Data Points.
- WM2310 — WINMAG 8 upgrade to newest version. 2500 Data Points.
- WM2340 — WINMAG 8 upgrade to newest version. 50,000 Data Points.
- WINMAG-SMALL — WINMAG basic package for up to 10 panels
- WINMAG-LARGE — WINMAG basic package for up to 150 panels
- WINMAG-MEDIUM — WINMAG basic package for up to 30 panels
Wireless
System Sensor AGILE
- SOLOADAPT HWKIT — Adapter for No Climb Solo poles - for use with CUP HWKIT
- 52051E-RF — Agile 58°C Fixed Temperature Heat Detector. Wireless fixed temperature (58°c) heat detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- M200G-RF-26 — Agile Gateway. Loop-powered Gateway device for System Sensor Agile wireless system. Up to 8 Gateways may be used on the same loop. This requires a B501AP base. Compatible with DXc panels only
- 22051E-RF-26 — Agile Photo Detector. Wireless optical smoke detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 22051TLE-RF-26 — Agile Photo-Thermal-IR Detector. Wireless Optical, Thermal & Infra-Red detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 52051RE-RF — Agile Rate of Rise Heat Detector. Wireless 'Rate of Rise' heat detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- M200F-RF — Agile Repeater. Network Repeater for extending the range of System Sensor Agile wireless networks. Powered by 4 x CR123A 3v batteries
- M200WC-RF-PRO — Agile Waterproof Wireless Manual Call Point RF 868 MHz System Sensor PRO
- R5A-RF — Agile WCP call point. Waterproof Manual Call Point for the System Sensor Agile wireless system. With magnetic anti-tamper mechanism and IP67-rating. Powered by 4 x CR123A 3v batteries
- B501RF — Agile Wireless Detector/Repeater Base. Base for Agile wireless detectors, repeater and sounder
- B501RF-RR — Agile Wireless Detector/Repeater Base. Base for Agile wireless sounders red
- M200I-RF — Agile Wireless Remote Indicator for System Sensor Agile wireless systems. Indicates the status of up to four System Sensor Agile wireless detectors via three coloured LEDs
- WSO-RR-RF — Agile Wireless Wall Mounted Addressable Sounder - RED for the System Sensor Agile wireless system.
- WSO-WW-RF — Agile Wireless Wall Mounted Addressable Sounder - WHITE for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- CUP HWKIT — CUP. Cup for setup and maintenance of Agile wireless detectors. For use with telescopic pole (POLE HWKIT)
- POLE HWKIT — POLE. Telescopic access pole for setup and maintenance of Agile wireless systems. Extends from 1.5 to 5.2m in length