Gent 1 to 4 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in Black. Batteries not included - requires 2 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations.
| Part no. | VIGPLUS-24 |
|---|---|
| Brand | Gent |
| Range | Vigilon Plus |
| Sub-range | Vigilon Plus Panels |
Image for illustration; item supplied may differ
At a glance
- One to four loopsOne loop card is supplied; the VIGPLUS-24 accepts up to four loop cards.
- Integral printerThe VIGPLUS-24 has an integral printer with one paper roll fitted and is in the 24-hour standby category.
- Internal standby batteriesOrder two 4015-602-YFR batteries separately for installation inside the panel.
- Model-specific battery chargerNominal battery charging current is 1 × 2.4A.
- Wall or semi-flush mountingSupports surface mounting or the VIG-24-FLUSH semi-flush surround; VIG-FLUSH-SS pairs with VIG-DOOR-SS for stainless steel.
- EN 54-2 and EN 54-4 listingVIGPLUS-24 is LPCB approved to EN 54-2 and EN 54-4.
Description
The Gent VIGPLUS-24 is a fire alarm control panel for one to four loops, supplied in black with one loop card and an integral printer with one paper roll fitted. It has its own mains power supply and space for the two standby batteries inside the panel. Order two 4015-602-YFR batteries separately; each is a Power Sonic Flame Retardant 12V 21Ah unit. The panel has a lockable front door with fire message scroll buttons below the display. It can be fixed to the wall or used with a semi-flush surround. Check the loop load and the required standby time when planning the system and adding additional loop cards.
The VIGPLUS-24 is the one-to-four-loop Gent Vigilon Plus control panel with an integral printer. The black panel is supplied with one loop card, an integral mains power supply and an integral printer with one paper roll fitted. Additional loops require additional VIG-LPC-EN cards, up to the panel's four-loop maximum.
Read the full technical description
The VIGPLUS-24 is the one-to-four-loop Gent Vigilon Plus control panel with an integral printer. The black panel is supplied with one loop card, an integral mains power supply and an integral printer with one paper roll fitted. Additional loops require additional VIG-LPC-EN cards, up to the panel's four-loop maximum.
The panel has an integral mains-derived PSU and houses its standby batteries internally. It requires two 4015-602-YFR Power Sonic Flame Retardant 12V 21Ah batteries, which are not included. Nominal battery charging current is 1 × 2.4A. The panel weighs approximately 10.2kg excluding batteries and 22.2kg with the specified batteries fitted.
The Vigilon Plus range supports up to 200 devices per loop, subject to electrical load, cable length and device distribution. A separate limit of 512 fire detectors and/or manual call points applies per control panel. The 24-hour standby category requires a load calculation with the Battery Standby and Loop Load Calculator, including the required alarm period.
Vigilon Plus networks support up to 31 panels and nodes, each fitted with a network card. Maximum distances between panels or nodes are 1.2km using copper cards or 2km using fibre cards. The range provides USB for commissioning and SD storage for configuration and event logs.
The lockable front door keeps the indicators visible and has two fire-message scroll buttons below the display. The panel supports surface mounting and the VIG-24-FLUSH semi-flush surround. The range also includes 19-inch rack mounting. The stainless steel arrangement uses VIG-FLUSH-SS with VIG-DOOR-SS. VIGPLUS-24 is LPCB approved to EN 54-2 and EN 54-4.
Specifications
| Manufacturer | Gent |
|---|---|
| Loop capacity | One to four loops. |
| Supplied equipment | Black panel with one loop card and an integral mains power supply; integral printer with one paper roll fitted. VIG-LPC-EN cards provide additional loops. |
| Printer | Integral printer with one paper roll fitted. |
| Finish | Supplied in black. |
| Power source | Integral mains-derived power supply with standby batteries. |
| Required batteries | 2 × 4015-602-YFR; Power Sonic Flame Retardant 12V 21Ah; not included. |
| Battery position | Inside the control panel. |
| Battery charging current | 1 × 2.4A nominal. |
| Battery current with mains disconnected | 6.2A maximum. |
| Panel weight | Approximately 10.2kg excluding batteries; 22.2kg with the specified batteries fitted. |
| Standby category | 24-hour model; actual standby and alarm duration require a load calculation. |
| Semi-flush option | VIG-24-FLUSH; stainless steel VIG-FLUSH-SS requires VIG-DOOR-SS. |
| Range loop design limit | Vigilon Plus range: up to 200 devices per loop, subject to electrical load, cable length and device layout. |
| Range detector and call-point limit | Vigilon Plus range: no more than 512 fire detectors and/or manual call points per control panel. |
|---|---|
| Range mains supply | Vigilon Plus range: 230V -15%/+10%, 50/60Hz; input current 1.4A. |
| Range enclosure dimensions | Vigilon Plus range: 543mm high × 406mm wide × 172mm deep, including outer door. |
| Range operating temperature | Vigilon Plus range: -5°C to +40°C. |
| Range storage temperature | Vigilon Plus range: -10°C to +55°C. |
| Range ingress protection | Vigilon Plus range: IP30. |
| Range display | Vigilon Plus range: backlit LCD with 8 lines of 40 characters. |
| Range zone indication | Vigilon Plus range: 32 integral zone LED indicators. |
| Range commissioning and storage | Vigilon Plus range: USB commissioning-tool connection; SD card for configuration and event logs. |
| Range network size | Vigilon Plus range: up to 31 control panels and network nodes, each fitted with a network card. |
| Range network distances | Vigilon Plus range: up to 1.2km between panels/nodes with copper cards or 2km with fibre cards. |
| Range master alarm circuits | Vigilon Plus range: two circuits, 24V nominal, 400mA maximum per circuit. |
| Standby design | Use the Battery Standby and Loop Load Calculator to check the required standby and alarm duration against the proposed load. |
Specifications per manufacturer documentation, subject to change. E&OE.
Standards and approvals
| Standard | What it covers |
|---|---|
| LPCB approved | Approved by the Loss Prevention Certification Board for fire detection and alarm system products. |
| EN 54-2:1997 + A1:2006 | |
| EN 54-4:1997 + A2:2006 | |
| LPCB listing 042cc/01 | |
| Declaration of Performance 129-CPR-2016 Issue 2 |
Approval body: BRE Global Limited (Loss Prevention Certification Board).
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Vigilon Plus 4-6 loop panel, data and installation (4188-1100 issue 4) | Installation | 9.6 MB | Download PDF |
Optional accessories
- VIG-NCNetwork Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)VIGILON NETWORK CARD (COPPER) VIG-NC£288.08ex VAT£345.70 inc VATIn stock
- VIG-NC-FOFibre Optic Network Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54 & V3+)VIGILON NETWORK CARD (MULTIMODE FIBRE) VIG-NC-FO£541.08ex VAT£649.30 inc VATIn stock
- VIG-LPC-ENLoop Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)VIGILON LOOP CARD VIG-LPC-EN£461.15ex VAT£553.38 inc VATIn stock
- VIG-LPCLoop Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54). Supports 3400, 34000 & Pre-VAD Squad devices.VIGILON LOOP CARD VIG-LPC-EN£1,492.13ex VAT£1,790.56 inc VATIn stock
- VIG-24-FLUSHFlush Surround (Main Control Panel and Terminal Node)FLUSH SURROUND VIG-24-FLUSH£210.50ex VAT£252.60 inc VATIn stock
- VIG-DOOR-SSStainless Steel Door for Vigilon Main Control PanelSTAINLESS STEEL DOOR FOR VIGILON MAIN CONTROL PANEL VIG-DOOR-SS£1,227.05ex VAT£1,472.46 inc VATIn stock
- VIG-FLUSH-SSVigilon Main Control Panel Flush Mounting Kit (Stainless Steel)STAINLESS STEEL FLUSH MOUNTING KIT FOR VIGILON MAIN CONTROL PANEL VIG-FLUSH-SS£666.17ex VAT£799.40 inc VATIn stock
- VIG-NC-SMFSMF Network CardUsed by / houses: SMF Network Card£618.13ex VAT£741.76 inc VATIn stock
+ 1 moreShow fewer
- VIG72-UPGRUpgrade Kit to convert Vigilon 24 to Vigilon 72. Batteries not included - requires 4 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations. Also requires additional Battery Enclosure VS-BATTBOX-72.Upgrade kit to extend the 1-to-4 loop (24hr) panel standby to 72 hours.£1,665.78ex VAT£1,998.94 inc VATIn stock
FAQs
How many loops does the VIGPLUS-24 provide?
The VIGPLUS-24 is supplied with one loop card and can be expanded to four loops using additional VIG-LPC-EN cards. The Vigilon Plus range supports up to 200 devices on a loop, subject to electrical load, cable length and device layout. A separate maximum of 512 fire detectors and/or manual call points applies to each control panel. The Battery Standby and Loop Load Calculator assesses the proposed devices and their loads when designing the loops and standby supply.
Which batteries should I order for VIGPLUS-24?
The VIGPLUS-24 requires two 4015-602-YFR Power Sonic Flame Retardant 12V 21Ah batteries. Batteries are not included with the panel. They fit inside the control panel, which has an integral mains-derived power supply and a nominal battery charging current of 1 × 2.4A. The panel weighs approximately 10.2kg without batteries and 22.2kg with them fitted. The Battery Standby and Loop Load Calculator assesses the proposed system load against the required standby period and alarm duration for the installation.
Can VIGPLUS-24 form part of a network?
A Vigilon Plus network can contain up to 31 control panels and network nodes. Every participating panel or node requires a network card. Maximum distances between panels or nodes are 1.2km with copper cards and 2km with fibre cards. Card selection and cable routes form part of the network design. Domain bridging connects separate networks through its own equipment and configuration. The range provides USB for commissioning and SD storage for configuration and event logs.
Does VIGPLUS-24 have a printer and cabinet options?
VIGPLUS-24 has an integral printer supplied with one paper roll fitted. Its lockable front door keeps the indicators visible and has two buttons below the display for scrolling fire messages. The panel supports surface mounting or semi-flush mounting with VIG-24-FLUSH. The stainless steel arrangement pairs the VIG-FLUSH-SS surround with the VIG-DOOR-SS door. Cable entries are at the rear and top, and the range also supports 19-inch rack mounting. The panel houses its two separately supplied standby batteries internally and weighs 22.2kg with them fitted.
Does the 24-hour designation guarantee the standby time?
VIGPLUS-24 is in the 24-hour standby category; the achieved duration depends on the installed system load. The standby calculation includes the proposed loop devices, their alarm loads and a 30-minute alarm period after standby. The Battery Standby and Loop Load Calculator assesses these loads together. The panel requires two 4015-602-YFR Power Sonic Flame Retardant 12V 21Ah batteries, which are not included. They fit inside the panel and charge from its integral mains-derived PSU at a nominal 1 × 2.4A.
Also in this range
- VIGPLUS-24-NP1 to 4 Loop Vigilon Plus Control Panel without printer c/w 1 loop card & supplied in black.£1,746.28ex VAT£2,095.54 inc VATIn stock
