Gent Flush Surround (Main Control Panel and Terminal Node)
| Part no. | VIG-24-FLUSH |
|---|---|
| Brand | Gent |
| Range | Vigilon Plus |
| Sub-range | Vigilon Plus Accessories |
Image for illustration; item supplied may differ
At a glance
- Semi-flush panel mountingA surround for setting the control panel back box into a prepared wall aperture.
- VIGPLUS-24 fitFor the Gent VIGPLUS-24 control panel.
- Network Node fitAlso used to semi-flush mount the Vigilon Plus Network Node.
- Defined wall openingThe aperture is 510mm high and 390mm wide.
- 132mm aperture depthPrepare the wall opening to a depth of 132mm.
- Back-box fixingFive 5mm screws from the spares pack secure the back box to the surround.
Description
The Gent VIG-24-FLUSH is a flush surround for semi-flush mounting of a VIGPLUS-24 control panel or Vigilon Plus Network Node. It fits a wall opening 510mm high, 390mm wide and 132mm deep and is fixed to the sides of the opening. The panel or node back box sits inside the surround, with cables fed through its top or rear entry points. Five 5mm fixing screws from the spares pack secure the back box to the surround. Cables are fed into the back box as it is inserted. For a Vigilon Plus panel installation, do not use semi-flush mounting if the battery enclosure sits immediately below the control panel.
VIG-24-FLUSH is a semi-flush surround for the VIGPLUS-24 control panel and Vigilon Plus Network Node.
Read the full technical description
VIG-24-FLUSH is a semi-flush surround for the VIGPLUS-24 control panel and Vigilon Plus Network Node.
The wall opening must be 510mm high, 390mm wide and 132mm deep. The surround is secured through its fixing holes to the sides of the opening.
Open the required top or rear cable entries in the equipment back box. Feed the cables through as the back box is inserted into the surround, then secure the box with five 5mm fixing screws from the spares pack.
For a Vigilon Plus panel installation, do not use semi-flush mounting if the battery enclosure sits immediately below the control panel.
Specifications
| Product type | Flush surround |
|---|---|
| Mounting arrangement | Semi-flush |
| Control panel fit | VIGPLUS-24 |
| Network Node fit | VIGPLUS-NODE |
| Wall aperture height | 510mm |
| Wall aperture width | 390mm |
| Wall aperture depth | 132mm |
| Surround fixing | Through fixing holes into aperture side walls |
| Back-box fixing screws | Five 5mm screws from the spares pack |
| Back-box cable entries for semi-flush mounting | Top or rear |
Specifications per manufacturer documentation, subject to change. E&OE.
Optional accessories
- VIGPLUS-241 to 4 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in Black.Compatible control panel.£1,926.25ex VAT£2,311.50 inc VATIn stock
- VIGPLUS-NODEVigilon Plus Terminal Node (EN54 version) for use with multiple IO cards and Fibre networks. Supplied in black.Compatible Network Node.£2,294.25ex VAT£2,753.10 inc VATIn stock
FAQs
Which equipment does VIG-24-FLUSH fit?
VIG-24-FLUSH is the semi-flush surround for the VIGPLUS-24 control panel and Vigilon Plus Network Node. In either installation, the surround is secured inside a wall opening and the equipment back box is fitted into it. The opening is 510mm high, 390mm wide and 132mm deep. Five 5mm fixing screws from the spares pack secure the back box to the surround. Cables enter through the top or rear of the box.
What size wall opening is needed for VIG-24-FLUSH?
Prepare an aperture 510mm high, 390mm wide and 132mm deep for VIG-24-FLUSH. These are the dimensions of the opening in the wall. The surround is fixed to the sides of that aperture through its fixing holes, and the panel or node back box then sits within the surround. Cables enter through the top or rear of the back box and are fed through the opened entry points as the box is inserted into the surround.
How is the back box secured to VIG-24-FLUSH?
First secure VIG-24-FLUSH to the side walls of the prepared aperture using the fixing holes in the surround. Route the cables through the selected entries while inserting the equipment back box. The back box is then secured to the surround with five 5mm fixing screws from the spares pack. This arrangement applies to the VIGPLUS-24 panel and Vigilon Plus Network Node, using the 510mm high, 390mm wide and 132mm deep wall opening.
Where do cables enter when using VIG-24-FLUSH?
Use the required top or rear cable entry points on the panel or node back box for this semi-flush arrangement. Open those points before placing the back box into VIG-24-FLUSH. Feed the cables through the entries as the box is inserted, then secure the box to the surround with five 5mm fixing screws from the spares pack. The surround itself is fixed into the side walls of the prepared aperture before the back box is fitted.
Can the panel be semi-flush mounted above a close-fitted battery box?
For a Vigilon Plus panel installation, do not use semi-flush mounting if the battery enclosure sits immediately below the control panel. The surround receives the equipment back box inside a prepared wall opening. The surround is used for the VIGPLUS-24 control panel or Vigilon Plus Network Node and needs an aperture 510mm high, 390mm wide and 132mm deep. The back box is secured to the surround with five 5mm fixing screws from the spares pack.