System Sensor Wet Base Shroud for use with Standard Bases to Allow Condensation Run Off and Rear Seal. Conduit entry only. Pure White Body
| Part no. | WB-1AP |
|---|---|
| Brand | System Sensor |
| Range | Addressable Detection |
| Sub-range | Base Accessories |
Image for illustration; item supplied may differ
At a glance
- Wet Base ShroudWB-1AP is a wet base shroud.
- Humid Environment EnclosureIt is an adapter base enclosure for humid environments.
- Standard B501AP BaseThe shroud is for use with the standard B501AP base.
- Three Mounting OptionsSurface mounting, cable mounting and pendant mounting are all possible.
- PC/ABS Pure White BodyThe material is PC/ABS in pure white.
- Weight And DimensionsThe shroud weighs 200g and measures 110 mm x 69 mm.
Description
The WB-1AP wet base shroud is an adapter base enclosure for humid environments. Applied to the standard B501AP base, it turns an ordinary mounting point into one intended for humid environments.
Fitting is not tied to one method: surface, cable and pendant mounting are all possible. The body is PC/ABS in pure white, 110 mm x 69 mm at 200g.
Read the full technical description
WB-1AP is a wet base shroud, an adapter base enclosure for humid environments. It is made for use with the standard B501AP base, taking that standard base position and adapting it for the damp conditions the shroud is built to work in. Three mounting options are possible: surface mounting, cable mounting and pendant mounting. The shroud is PC/ABS, pure white, measuring 110 mm x 69 mm and weighing 200g.
Specifications
| Variant code | WB-1AP-IV |
|---|---|
| Description | Wet base shroud for detector base |
Specifications per manufacturer documentation, subject to change. E&OE.