585000.31 INC-D G2 Network Controller with DAL Module
Images are representative and may not show the exact item supplied; product and specifications subject to change — E&OE. Spotted an issue? Let us know.
- Brand
- Honeywell
- Manufacturer part number
- 585000.31
- EN 54 part / class
- —
- Load factor per device
- —
- Max quantity per loop
- —
Overview
What it is and how it fits the system.
585000.31 is the DAL member of the INC Generation 2 range: a DAL module brings 8 DAL ports for intercoms and UIM onto the controller, and 14 GPIOs arrive with it.
Speaker infrastructure is handled by speaker line modules, the SPKR-8 585020 8 Speaker Line Module being the accessory concerned, feeding 70 V/100 V lines whose maximum switching voltage is 250 V AC, with 5 A continuous current and peak voltage resistance of min. 1.5 kV. An intuitive display interface fronts the unit, and Modbus protocol over Serial link (RS485) reaches 3rd Party Modbus interface equipment.
Power comes in at AC 115 V - 230 V, 50 to 60 Hz, backed by 21.5 V - 28.8 V DC. Audio travels as VARIODYN® ONE ADPCM, sampled at 48 kHz, 24 bit, into electronically balanced AF outputs. The unit occupies 483 x 88 x 415 mm and works from -5°C to +55°C.
Key features
- DAL Module Variant — 585000.31 is an intelligent network controller with DAL module (8 DAL ports) and 14 GPIOs.
- Eight DAL Bus Inputs — The 8 DAL bus inputs are provided for intercoms and UIM.
- Fourteen Contact Ports — There are 14 contact inputs/outputs, of which 10 ports are configurable as input with supervision or output.
- Four Relay Outputs — 4 relay outputs (normally open) take a maximum external voltage of 24 V DC/ 1 A with surge voltage resistance > 1.5 kV.
- Contact Input Rating — Contact inputs accept max. 24 V DC (over DAL Bus) at 10 k Ω input resistance.
- Contact Output Rating — Each contact output is rated for max. 50 mA load current at 24 V DC external voltage.
- Amplifier And Speaker Capacity — Amplifier management covers up to 8 channels, each rated max. 500 W, alongside as many as 48 speaker circuits.
- Relay Matrix Operating Mode — Direct Drive or Relay Matrix operating modes are available, including an inbuilt Relay Matrix Mode.
Technical overview
585000.31 is the DAL variant of the VARIODYN® ONE Intelligent Network Controller, model INC-D G2, an intelligent network controller with DAL module (8 DAL ports) and 14 GPIOs. Its 8 DAL bus inputs are there for intercoms and UIM, while the controller itself oversees amplifiers, speaker lines and call stations.
On the contact side there are 14 contact inputs/outputs, 10 ports configurable as input with supervision or output, and 4 relay outputs (normally open). Maximum contact input voltage is 24 V DC (over DAL Bus), against an input resistance of 10 k Ω. Contact outputs are rated for max. 50 mA load current at 24 V DC external voltage, and the relay outputs take 24 V DC/ 1 A with surge voltage resistance > 1.5 kV.
Amplifier and loudspeaker duties run to as many as 8 amplifier channels rated max. 500 W per channel, 5 A current per channel, max. 6 speaker line module slots at 8 speaker lines each, and 8 simultaneous audio streams per controller. Direct Drive or Relay Matrix operating modes apply, Advance DSP capability includes Delay and Parametric Equalizer, and built-in memory of 0.9 GB holds configuration and audio files.
Specifications
Full technical data for this part.
Environment & ingress
| Relative humidity | <95%, non-condensing |
|---|---|
| Storage temperature | -40°C … +70°C |
Electrical
| Mains power supply | AC 115 V - 230 V (-15% … +10%), 50 … 60 Hz |
|---|---|
| Backup power supply | 21.5 V - 28.8 V DC |
| Amplifier channels | up to 8 amplifier channels (max. 500 W per channel) |
Physical
| Dimensions | (W x H x D) 483 x 88 x 415 mm |
|---|---|
| Weight | 11.9 - 12.45 kg |
Other specifications
| Model name | INC-D G2 |
|---|---|
| Module configuration | DAL module (8 DAL ports) and 14 GPIOs |
| Sampling rate | 48 kHz, 24 bit |
| Encode decode | VARIODYN® ONE ADPCM |
| Audio storage | 0.9 GB |
| Built in memory | 0.9 GB/ 5 hrs. |
| Operation temperature | -5°C … +55°C |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Compare variants
Alternatives in the same range — pick the variant that fits your install.
INC w/o any optional modules
INC w/ DANTE Module 8X8 & 12 GPIOs
INC w/ Aud In/ Out Module & 12 GPIOs
Datasheets & documents
Reference downloads.
- 510 KB