Honeywell INC w/ DANTE Module 8X8 & 12 GPIOs
| Part no. | 585000.32 |
|---|---|
| Brand | Honeywell |
| Range | V1 Voice Rack |
| Sub-range | Controller |
Image for illustration; item supplied may differ
At a glance
- Dante Module Variant585000.32 carries a Dante module (8x8) alongside 14 GPIOs.
- Eight In Eight OutThe module offers 8 x Dante Audio Inputs and 8 x Dante Audio Outputs.
- Redundant Dante Network PortsThe Dante side carries redundant Dante network ports, and its Ethernet ports are primary and secondary, 100 Mbps.
- AES67 Audio TransportThe transport format is Dante audio over IP, AES67 RTP.
- Low Latency AudioDante audio is sampled at 48 kHz/24 bit, PCM with audio latency <10 ms.
- Contact Interface CapacityThere are 14 contact inputs/outputs, 10 of them able to be configured as input with supervision or output, while 4 relay outputs are normally open.
- Amplifier And Loudspeaker ControlUp to 8 amplifier channels of max. 500 W per channel are managed, with speaker capacity of 48 circuits across 6 modules.
- Modbus Serial IntegrationModbus protocol over Serial link (RS485) provides the path to 3rd Party Modbus interface equipment.
Description
Installations carrying audio over a Dante network are the place for 585000.32, an intelligent network controller with Dante module (8x8) and 14 GPIOs from the INC Generation 2 family.
Audio output is carried on 8 electronically balanced AF output channels at 0 dBu nominal, peaking at +6 dBu, held to ≤±1 dB from 20 Hz to 20 kHz with THD under 0.03% at 1 kHz. Signal-to-noise betters 85 dB A-weighted, and the load presented is Min. 5 kΩ, Max. 500 pF. Loudspeaker lines run at 70 V/100 V, switched at up to 250 V AC and 5 A continuous current, using the SPKR-8 585020 8 Speaker Line Module. Configuration and audio files occupy 0.9 GB, or 5 hrs., of built-in memory, and the controller carries an intuitive display interface.
585000.32 is the Dante-equipped member of the VARIODYN® ONE Intelligent Network Controller family, model INC-Dante G2, pairing a Dante module (8x8) with 14 GPIOs. Management and monitoring of amplifiers, speaker lines and call stations remain its core work.
The Dante module presents 8 x Dante Audio Inputs and 8 x Dante Audio Outputs through redundant Dante network ports. Primary and secondary Ethernet ports, 100 Mbps, carry Dante audio over IP and AES67 RTP, that transport running at 48 kHz/24 bit, PCM across 8 input channels and 8 output channels with audio latency <10 ms.
Read the full technical description
Supply is AC 115 V - 230 V at 50 to 60 Hz. Storage is possible between -40°C and +70°C. Relative humidity is <95%, non-condensing, and the controller weighs 11.9 - 12.45 kg.
585000.32 is the Dante-equipped member of the VARIODYN® ONE Intelligent Network Controller family, model INC-Dante G2, pairing a Dante module (8x8) with 14 GPIOs. Management and monitoring of amplifiers, speaker lines and call stations remain its core work.
The Dante module presents 8 x Dante Audio Inputs and 8 x Dante Audio Outputs through redundant Dante network ports. Primary and secondary Ethernet ports, 100 Mbps, carry Dante audio over IP and AES67 RTP, that transport running at 48 kHz/24 bit, PCM across 8 input channels and 8 output channels with audio latency <10 ms.
Contact capability runs to 14 inputs/outputs; 10 of the ports may be configured as input with supervision or output; 4 relay outputs are normally open. Amplifier management extends to 8 channels of max. 500 W each, at 5 A current per channel, while loudspeaker capacity reaches 48 circuits across 6 modules. Eight simultaneous audio streams run per controller, an inbuilt Relay Matrix Mode sits beside the Direct Drive alternative, and the DSP parameters take in High Pass /Low pass filters and Dynamic Range Control.
Specifications
| Model name | INC-Dante G2 |
|---|---|
| Description | Intelligent network controller with Dante module (8x8) and 14 GPIOs |
| Dante interface | INC - DANTE with 8 In and 8 Out DANTE port with 14 GPIOs |
| Operating modes | "Direct Drive" or "Relay Matrix" operating modes provide flexibility |
| Built in memory | Built-in memory for configuration and audio files (0.9 GB/ 5 hrs.) |
| Amplifier channels | Manages up to 8 amplifier channels (max. 500 W per channel) |
| Amplifier channel current | 8 amplifier channels with the maximum capacity of 5 A current per channel |
| Speaker circuits | Up to 48 speaker circuits divided into 6 modules with 8 speaker circuits each |
|---|---|
| Simultaneous audio | Supports 8 simultaneous Audio per controller |
| Modbus | Modbus protocol over Serial link (RS485) to integrate with 3rd Party Modbus interface |
| Mains power supply | AC 115 V - 230 V (-15% … +10%), 50 … 60 Hz |
| Backup power supply | 21.5 V - 28.8 V DC |
| Sampling rate | 48 kHz, 24 bit |
| Encode decode | VARIODYN® ONE ADPCM |
Specifications per manufacturer documentation, subject to change. E&OE.
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Datasheet (585000, 585000.31, 585000.32, 585000.33, 585020) | Datasheet | 510 KB | Download PDF |
Also in this range
- 585000INC w/o any optional modules£2,789.33ex VAT£3,347.20 inc VATIn stock
- 585000.31INC w/ DAL Module 8 DAL ports & 12 GPIOs£3,235.53ex VAT£3,882.64 inc VATIn stock
- 585000.33INC w/ Aud In/ Out Module & 12 GPIOs£3,436.78ex VAT£4,124.14 inc VATIn stock
