Honeywell INC w/ Aud In/ Out Module & 12 GPIOs
| Part no. | 585000.33 |
|---|---|
| Brand | Honeywell |
| Range | V1 Voice Rack |
| Sub-range | Controller |
Image for illustration; item supplied may differ
At a glance
- Audio In Out Module585000.33 combines an Audio in/out module (6 in/out) with 14 GPIOs.
- Six Potential-Free ChannelsThe module offers 6 potential-free audio inputs/outputs.
- Microphone And Line InputsInput nominal level is Microphone: -51 dBu and Line: 0 dBu to +6 dBu, at a typical impedance of 200 Ω.
- Auxiliary Output PerformanceThe 6 auxiliary audio outputs give 0 dBu nominal over 20 Hz to 20 kHz, ±3 dB, with THD under 0.05% at 1 kHz at 200 Ω output impedance.
- Source And Sensor InputsAudio inputs can be connected with microphone or audio source devices, including microphone sensors for automatic volume control.
- External System OutputsAudio outputs can be connected with external audio devices/systems.
- Contact Port ProvisionThe controller provides 14 contact inputs/outputs, with 10 ports configurable for input with supervision or for output, plus 4 relay outputs of the normally open type.
- Loudspeaker Line CapacityMax. 6 speaker line module slots carry 8 speaker lines each at 70 V/100 V.
Description
585000.33 answers the need for audio input and output interfacing inside an INC Generation 2 installation, putting an Audio in/out module (6 in/out) and 14 GPIOs on one controller.
Loudspeaker duty is handled by speaker line modules: 8 speaker lines per module across max. 6 module slots, 70 V/100 V line voltage, 250 V AC switching and 5 A continuous current, with the SPKR-8 585020 8 Speaker Line Module as the expansion accessory. Direct Drive and Relay Matrix operating modes both apply, Volume and Delay sit within the Advance DSP capability, and Modbus protocol over Serial link (RS485) links the controller with a 3rd Party Modbus interface.
585000.33 is the VARIODYN® ONE Intelligent Network Controller in its auxiliary-audio form, model INC-A G2, carrying an Audio in/out module (6 in/out) alongside 14 GPIOs. Responsibility for the amplifiers, speaker lines and call stations of the system stays with this controller.
The audio module brings 6 potential-free audio inputs/outputs to the controller. Inputs work at Microphone: -51 dBu and Line: 0 dBu to +6 dBu nominal, covering Microphone: 100 Hz to 8 kHz at ± 6 dB and Line: 20 Hz to 20 kHz, ±3 dB. Input distortion stays under 0.05% at 1 kHz, signal-to-noise reads Microphone: > 65 dB, A-weighted and Line: > 95 dB, A-weighted, and typical impedance is 200 Ω. On the way out, 6 channels deliver 0 dBu nominal over 20 Hz to 20 kHz, ±3 dB, with THD under 0.05% at 1 kHz, a max. distortion factor of 1% in the frequency range, SNR above 85 dB A-weighted and 200 Ω output impedance.
Read the full technical description
Operating temperature is -5°C to +55°C, storage -40°C to +70°C, and the unit runs on AC 115 V - 230 V mains with 21.5 V - 28.8 V DC as the backup source. Memory of 0.9 GB holds 5 hrs. of configuration and audio files.
585000.33 is the VARIODYN® ONE Intelligent Network Controller in its auxiliary-audio form, model INC-A G2, carrying an Audio in/out module (6 in/out) alongside 14 GPIOs. Responsibility for the amplifiers, speaker lines and call stations of the system stays with this controller.
The audio module brings 6 potential-free audio inputs/outputs to the controller. Inputs work at Microphone: -51 dBu and Line: 0 dBu to +6 dBu nominal, covering Microphone: 100 Hz to 8 kHz at ± 6 dB and Line: 20 Hz to 20 kHz, ±3 dB. Input distortion stays under 0.05% at 1 kHz, signal-to-noise reads Microphone: > 65 dB, A-weighted and Line: > 95 dB, A-weighted, and typical impedance is 200 Ω. On the way out, 6 channels deliver 0 dBu nominal over 20 Hz to 20 kHz, ±3 dB, with THD under 0.05% at 1 kHz, a max. distortion factor of 1% in the frequency range, SNR above 85 dB A-weighted and 200 Ω output impedance.
The controller provides 14 contact inputs/outputs, with 10 ports configurable for input with supervision or for output, plus 4 relay outputs of the normally open type. Audio inputs can be connected with microphone or audio source devices, and with microphone sensors for automatic volume control, while audio outputs can be connected with external audio devices/systems.
Specifications
| Model name | INC-A G2 |
|---|---|
| Audio in out module | Audio in/out module (6 in/out) |
| Gpios | 14 GPIOs |
| Auxiliary audio input channels | 6 (AUXILIARY AUDIO INPUT/OUTPUT (OPTIONAL)) |
| Operating modes | "Direct Drive" or "Relay Matrix" operating modes provide flexibility |
| Built in memory | Built-in memory for configuration and audio files (0.9 GB/ 5 hrs.) |
| Audio storage | 0.9 GB |
| Amplifier channels | Manages up to 8 amplifier channels (max. 500 W per channel) |
|---|---|
| Amplifier channel current | maximum capacity of 5 A current per channel |
| Speaker circuits | Up to 48 speaker circuits divided into 6 modules with 8 speaker circuits each |
| Simultaneous audio | Supports 8 simultaneous Audio per controller |
| Modbus protocol | Modbus protocol over Serial link (RS485) to integrate with 3rd Party Modbus interface |
| Dsp capability | Advance DSP capability to change and save: Volume, Dynamic Range Control, Delay, Parametric Equalizer, High Pass/Low pass filters per Amplifier channel |
| User interface | Intuitive LED interface ensuring you can easily understand the system status |
Specifications per manufacturer documentation, subject to change. E&OE.
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Datasheet (585000, 585000.31, 585000.32, 585000.33, 585020) | Datasheet | 510 KB | Download PDF |
Also in this range
- 585000INC w/o any optional modules£2,789.33ex VAT£3,347.20 inc VATIn stock
- 585000.31INC w/ DAL Module 8 DAL ports & 12 GPIOs£3,235.53ex VAT£3,882.64 inc VATIn stock
- 585000.32INC w/ DANTE Module 8X8 & 12 GPIOs£3,477.03ex VAT£4,172.44 inc VATIn stock
