Addressable Audio Visual Devices
Morley BGL-PC-I00 EN54-23 Detector Base Strobe
- Product code
- BGL-PC-I00
- Alternate product code
- MI-BGL-PC-I
- Device class
- Detector Base Strobe (EN54-23 C Category)
- Supply voltage
- 15 to 29 VDC (Isolation)
- Operating voltage range
- 15 to 29V
- Standby current
- 150 uA maximum
- Current consumption alarm
- typical strobe in alarm: 15mA @ 24V
You will also need
Needed to install, power or certify this product.
Analogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label. PURE WHITE
Detector Base Strobe twist-fits onto the universal B501AP base for mounting.
Overview
What it is and how it fits the system.
The Morley BGL-PC-I00 is an EN54-23 approved detector base strobe, a modular high-output loop-powered device that integrates a strobe into the detector base to alert all building occupants of a potential fire. Categorised as EN54-23 Category C, it operates from 15 to 29 VDC with isolation, drawing a maximum 150 uA standby and a typical 15 mA in alarm at 24 V. The strobe offers selectable 0.5 Hz and 1 Hz flash rates and is also referenced as MI-BGL-PC-I.
Technical overview
The Morley BGL-PC-I00 is an EN54-23 Category C detector base strobe, a modular high-output loop-powered device that integrates a strobe into the detector base to alert all building occupants of a potential fire. It operates from 15 to 29 VDC with isolation, drawing a maximum 150 uA standby and a typical 15 mA in alarm at 24 V. The device features selectable 0.5 Hz and 1 Hz flash rates, with a red flash and clear lens, and is also referenced as MI-BGL-PC-I.
Designed for compatibility, it uses a simple twist-fit mechanism onto the universal B501AP base, helping to ensure straightforward installation. It is operated and controlled via System Sensor Advanced or CLIP Protocol, and physical wiring details are specified in the installation manual. The unit has a net weight of 271g and a gross weight of 291g, with cable terminals accommodating 1.5 to 2.5 mm² conductors.
Specifications
Full technical data for this part.
| Product code | BGL-PC-I00 |
|---|---|
| Alternate product code | MI-BGL-PC-I |
| Device class | Detector Base Strobe (EN54-23 C Category) |
| Supply voltage | 15 to 29 VDC (Isolation) |
| Operating voltage range | 15 to 29V |
| Standby current | 150 uA maximum |
| Current consumption alarm | typical strobe in alarm: 15mA @ 24V |
| Cable terminal size | 1.5 - 2.5mm2 max |
| Flash rate hz | 0.5 Hz / 1 Hz |
| Flash rate | 0.5 Hz |
| Flash colour | Red |
| Lens colour | Clear |
| Colour | Pure white |
| Weight net gross | 271g / 291g |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Optional accessories
Optional additions — this product works without them.
10 X IP 21 SEAL(C 934) BRH/BRS/BGL
compatible / works with: 10 X IP 21 SEAL(C 934) BRH/BRS/BGL