Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Sales 01509 648840
FireAgent
Basket (0)

Part Number or the Week S3EP-V-VAD-HPR-R

VESDA 25mm ABS Pipe 2.4m PK25 RED

Part no.PIP-001-2.4
BrandVESDA
RangeAspirating Smoke Detection
Sub-rangePipework Red 25mm
Xtralis PIP-001-2.4 ABS ASD Pipe 25mm 2.4m Red — single red pipe with black printed warning text, open end visible.

Image for illustration; item supplied may differ

At a glance

  • ABS Sampling PipePIP-001-2.4 is an Xtralis ASD pipe manufactured from Acrylonitrile Butadiene Styrene (ABS).
  • Smooth Bore AirflowThe 25 mm OD and 21 mm ID smooth-bore design gives consistent airflow and optimal system performance.
  • 2.4 m LengthsPipe is packaged in bundles of 25 pipes in 2.4 m lengths.
  • Red Pipe ColourThe colour of this pipe is red.
  • Solvent Cement JointingThe pipe is easy to joint using ABS solvent cement, with full compatibility across all ASD pipe fittings.
  • Ultra-Low Halogen ContentHalogen content is ultra-low (<0.00001%).
  • EN 54-20 CertificationThe pipe is tested and certified to EN 54-20 and EN 61386-1.
  • ASD System CompatibilityIt is compatible with VESDA, VESDA-E and FAAST FLEX ASD systems.
DescriptionSpecificationsAlso in this range

Description

Aspirating detection depends on pipework that carries sampled air reliably back to the detector, and this ABS pipe is built for that duty. Each length runs 2.4 m, with a 25 mm outside diameter over a 21 mm smooth bore, and every bundle holds 25 pipes. The colour is red.

Installation uses ABS solvent cement, and the pipe is fully compatible with the complete range of ASD fittings. Ultra-low halogen content (<0.00001%) and excellent chemical resistance suit diverse environments, while the ABS construction is tough and durable, aimed at long-term reliability.

PIP-001-2.4 is a red Xtralis ASD sampling pipe manufactured from Acrylonitrile Butadiene Styrene (ABS), carrying sampled air back to the detector. The bore is smooth, 25 mm OD and 21 mm ID, for consistent airflow and optimal system performance. Pipe is packaged in bundles of 25 pipes in 2.4 m lengths.

Jointing is easy using ABS solvent cement, with full compatibility across all ASD pipe fittings. Halogen content is ultra-low (<0.00001%), chemical resistance is excellent for use in diverse environments, and the tough, durable ABS construction is designed for long-term reliability.

Read the full technical description

Certification covers EN 54-20 and EN 61386-1. Manufacture follows BS5391 under BS EN ISO 9001 approval spanning design, manufacture and inspection, and the pipe works with VESDA, VESDA-E and FAAST FLEX ASD systems.

PIP-001-2.4 is a red Xtralis ASD sampling pipe manufactured from Acrylonitrile Butadiene Styrene (ABS), carrying sampled air back to the detector. The bore is smooth, 25 mm OD and 21 mm ID, for consistent airflow and optimal system performance. Pipe is packaged in bundles of 25 pipes in 2.4 m lengths.

Jointing is easy using ABS solvent cement, with full compatibility across all ASD pipe fittings. Halogen content is ultra-low (<0.00001%), chemical resistance is excellent for use in diverse environments, and the tough, durable ABS construction is designed for long-term reliability.

The pipe is tested and certified to EN 54-20 and EN 61386-1. Manufacture is in accordance with BS5391 and approved to BS EN ISO 9001, covering product design, manufacture and inspection. It is designed specifically for use in ASD systems including VESDA, VESDA-E and FAAST FLEX.

Specifications

Materialhigh-quality Acrylonitrile Butadiene Styrene (ABS)
DescriptionABS Pipes 25mm, Length 2.4m (25pcs), Red
Length2.4 m
Pack quantitypacks of 25 (25pcs)
Outside diameter25 mm OD
Inside diameter21 mm ID smooth-bore design
ColourRed (also available in red, white and grey colours)
JointingEasy to joint using ABS solvent cement with full compatibility across all ASD pipe fittings
Specific gravity1.04 (Test Method ASTM D792)
Melt mass flow rate mfr200°C/21.6 kg 47 g/10 min; 200°C/5.0kg 4.1 g/10 min; 220°C/10.0 kg 34 g/10 min (Test Method ASTM D1238)
Molding shrinkage flow0.0040 to 0.0070 in/in (Test Method ASTM D955)
Tensile strengthYield, 23°C (73°F) 50.0mm (1.97 in) 6670 psi (Test Method ASTM D638)
Tensile elongationYield, 23°C (73°F) 50.0 mm (1.97 in), 15% (Test Method ASTM D638)
Flexural modulusYield, 23°C (73°F) 3.00 mm (0.118 in) 312000 psi (Test Method ASTM D638)

Specifications per manufacturer documentation, subject to change. E&OE.

Also in this range