Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Part Number or the Week S3EP-V-VAD-HPR-R

Honeywell Sounder VAD-White Base- White Flash

Part no.CWSS-WW-S5
BrandHoneywell
RangeConventional Audio Visual Devices
Sub-rangeSounder VAD
CWSS-WW-S5 Sounder Strobe — white body with clear lens and visible LEDs, three-quarter view

Image for illustration; item supplied may differ

Description

This all-white sounder strobe combines a white flash and clear lens with a 107dB(A) at 1m sounder, approved to EN54-3 and EN54-23 for W and C class coverage. W class applies to wall mount and C class to ceiling mount applications, and the unit ships with a low-profile base. It operates on 12 to 29VDC, drawing an average 49mA at 29VDC in W class.

CWSS-WW-S5 combines a conventional sounder with a white-flash visual alarm behind a clear lens on a white body - the all-white variant in the Conventional Audio Visual Devices range, EN54-Pt.3 and Pt.23 W and C class approved for wall-mount (W class) and ceiling-mount (C class) duty. On its white low-profile base the device carries an IP21C rating; a deep base raises this to IP65, sealed with a PS188 O-ring and PS189 gasket.

Read the full technical description

CWSS-WW-S5 combines a conventional sounder with a white-flash visual alarm behind a clear lens on a white body - the all-white variant in the Conventional Audio Visual Devices range, EN54-Pt.3 and Pt.23 W and C class approved for wall-mount (W class) and ceiling-mount (C class) duty. On its white low-profile base the device carries an IP21C rating; a deep base raises this to IP65, sealed with a PS188 O-ring and PS189 gasket.

The device runs from 12 to 29VDC; typical current draw averages 49 mA (measured at 29 V DC, W class, Tone 7), while the loudest of its 32 tones - among them a bell tone - delivers 107 dB(A) at one metre on Tone 23, with high or medium volume settings. Once the supply is energised, the flash pulses at 0.5 Hz and falls into step with neighbouring devices.

Built in flame-retardant PC/ABS, the sounder strobe operates from -25°C to 70°C at up to 93% ±3% non-condensing humidity and terminates cable of 0.5-2.5mm². Compatible accessories cover the SC076 earth strap and the CSW white low-profile base, a match for the base on which this device sits.

Specifications

Body colourWhite
Flash colourWhite
Lens colourclear lens
Base includedLow profile base included
Device classW and C class (Wall mount W class / Ceiling mount C class)
ApprovalsEN54-Pt.3 and Pt.23 W and C class approved
Operating voltage12 to 29VDC
Operating voltage approvedEN54-23 @12 to 29 VDC (C & W) EN54-3 @ 9-14 VDC & 18-29VDCt
Current consumption average49mA @ 29VDC (W Class) Tone 7
Sound output maximum107db(A) @1m (Tone 23)
Number of tones32 includes a bell tone (Full tone table available on website & manual installation)
Volume settingHigh or medium
Flash rate hz0.5 Hz
SynchronisationSynchronisation - Automatically on power on, meets EN54-3 and exceeds EN54-23 standard

Specifications per manufacturer documentation, subject to change. E&OE.

Documents

DocumentTypeSizeDownload
Datasheet (CWSS-RR-S5, CWSS-RW-S5, CWSS-RW-W5, CWSS-WW-S5, CWSS-WW-W5)Datasheet746 KBDownload PDF

Optional accessories