Automatic Fire Detection · System Sensor AGILE
Agile 22051E-RF-26 Wireless Optical Smoke Detector
- Ordering code
- 22051E-RF-26
- Product type
- Automatic Fire Detection
- Detector type
- Photo Detector
- Radio frequency
- 865-870 MHz
- Transmitting power
- <25mW e.r.p.
- Batteries
- 4 CR123A 3V
- Operating temperature
- -30: 60 °C
You will also need
Needed to install, power or certify this product.
Agile Wireless Detector/Repeater Base. Base for Agile wireless detectors, repeater and sounder
required mounting base (height quoted with B501RF)
Overview
What it is and how it fits the system.
The 22051E-RF-26 is a Series 200 Wireless photoelectric smoke detector within the Agile Wireless Fire Detection System, delivering automatic fire detection without cabling. It communicates on the 865-870 MHz band at under 25mW e.r.p. and runs on four CR123A 3V batteries. Rated for -30 to 60 degrees C and 10-93% RH non-condensing, it measures 102mm in diameter and 70mm high on the B501RF base.
Technical overview
The 22051E-RF-26 is a System Sensor AGILE photoelectric smoke detector, a Series 200 Wireless (Agile) device that delivers automatic fire detection without cabling. It belongs to the Agile Wireless Fire Detection System, an extension of the Series 200 product range, and integrates into existing Series 200 panels rather than requiring separate infrastructure.
Communication runs over a wireless mesh network with bidirectional signalling, giving each device two independent paths back through the system. The detector operates across 18 RF channels in the 865-870 MHz band and reaches up to 400m in free air, while addresses are set with the S200 rotary switches and traffic follows the S200 CLIP and Advanced protocols. Signals pass through a loop-powered Gateway, with up to eight Gateways supported on a single loop under severe interference conditions.
Design, configuration and diagnostics are handled through the AgileIQ PC-based software tool. The detector mounts on the B501RF base, its required mounting accessory, and physical wiring and connection details are set out in the installation manual.
Specifications
Full technical data for this part.
| Ordering code | 22051E-RF-26 |
|---|---|
| Product type | Automatic Fire Detection |
| Detector type | Photo Detector |
| Radio frequency | 865-870 MHz |
| Transmitting power | <25mW e.r.p. |
| Batteries | 4 CR123A 3V |
| Operating temperature | -30: 60 °C |
| Humidity no condensation | 10: 93 %RH |
| Length diameter | 102mm |
| Height | 70mm (with B501RF base) |
| Weight with batteries | 196g |
| Package weight | 258g |
| Package size length | 125 L |
| Package size width | 110 W |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Datasheets & documents
Reference downloads.
- 823 KB