Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Sales 01509 648840
FireAgent
Basket (0)

Part Number or the Week S3EP-V-VAD-HPR-R

VESDA VLF-250 Aspirator Assembly (1 Fan)

Part no.VSP-722
BrandVESDA
RangeVESDA VLF

Image for illustration; item supplied may differ

At a glance

  • VESDA VLF-250 AspiratorVSP-722 is the aspirator of the VESDA VLF-250.
  • Retaining Clip FittingThe aspirator clips into the retaining clip and swings back into the detector.
  • Securing Screw And ClipsAn aspirator securing screw and retaining clip points hold it in place.
  • Fan Loom ConnectionThe fan wiring loom connects at the aspirator.
  • Correct Seating EssentialThe aspirator must be correctly seated so that gaskets are not damaged or dislodged from its underside.
  • Clean Area Before RefittingAny time the aspirator is removed the area surrounding it should be clear of dirt and debris.
  • Monitoring Authority AdvisedPrior to replacing the aspirator the monitoring authority is advised that power is to be removed and the system disabled.
DescriptionSpecificationsOptional accessories

Description

VSP-722 is the aspirator of the VESDA VLF-250 detector, a replaceable internal component. It seats in the retaining clip and swings back into the detector, with the securing screw and clip points holding it and the fan loom reconnected at the aspirator.

Seating matters: correct seating is essential so that gaskets are not damaged or dislodged from the underside of the aspirator. Clear the surrounding area of dirt and debris whenever the part is taken out, and tell the monitoring authority in advance that power is to be removed and the system disabled.

Read the full technical description

VSP-722 is the aspirator for the VESDA VLF-250. It clips into the retaining clip and swings back into the detector, held by an aspirator securing screw and the retaining clip points, with the fan wiring loom connected at the aspirator. The aspirator must be correctly seated; this is essential to ensure that gaskets are not damaged or dislodged from the underside of the aspirator. Any time the aspirator is removed, the area surrounding it should be clear of dirt and debris before it is replaced, and the monitoring authority is advised beforehand that power is to be removed and the system disabled.

Specifications

Ordering codeVSP-722
DescriptionAspirator for VESDA VLF-250

Specifications per manufacturer documentation, subject to change. E&OE.

Optional accessories