Input/Output card · Gent Legacy
Gent Vigilon VIG-IOC-V3+ BS Input/Output Card RS232
- Product type
- Input/Output card
- Designation
- BS Vigilon IOC (VIG-IOC-V3+)
- Rotary switch setting not domain aware
- SW2 Position 1
- Rotary switch setting domain aware
- SW2 Position 5
- Configuration action
- Set the Rotary Switch (SW2) to the Required position
- Communications interface
- RS232 Max 15m
- Panel requirement
- IOC Card is required for VIG1-24/72 Panels
Overview
What it is and how it fits the system.
The VIG-IOC-V3+ is the BS Vigilon Input/Output Card (IOC) used in the Vigilon fire alarm system, providing RS232 communications between a Vigilon panel or network and WINMAG Plus over distances up to 15m. The card is required for VIG1-24/72 panels. Rotary switch SW2 is set to position 1 when not domain aware, or to position 5 when domain aware.
Technical overview
The VIG-IOC-V3+ is a Gent by Honeywell Input/Output Card (IOC) for the BS Vigilon fire alarm system. It provides RS232 communications between a Vigilon panel or network and WINMAG Plus over distances up to 15m. The card is specifically required for VIG1-24/72 panels and features a rotary switch (SW2) with two defined positions: position 1 for non-domain-aware operation and position 5 for domain-aware configuration.
This IOC card is designated as the BS Vigilon IOC (VIG-IOC-V3+) and forms part of the Gent Legacy range within the V3+ sub-range. Compatibility includes EN Vigilon IOC (VIG-IOC-DOM) as an equivalent variant, and it is listed among Vigilon Extra cards alongside the EN54-compliant VIG-IOC Input/Output card. Physical wiring details are referenced in the installation manual, with terminal-by-terminal connections outside the scope of this record. The VIG-IOC-V3+ enables integration with WINMAG Plus and supports Vigilon 4-6 Loop panels when connected via a VIG-NODE-24, where SW2 settings follow the specified table.
Specifications
Full technical data for this part.
| Product type | Input/Output card |
|---|---|
| Designation | BS Vigilon IOC (VIG-IOC-V3+) |
| Rotary switch setting not domain aware | SW2 Position 1 |
| Rotary switch setting domain aware | SW2 Position 5 |
| Configuration action | Set the Rotary Switch (SW2) to the Required position |
| Communications interface | RS232 Max 15m |
| Panel requirement | IOC Card is required for VIG1-24/72 Panels |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Enhancements (optional)
Optional additions — this product works without them.
Input/Output Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
EN equivalent variant is the EN Vigilon IOC (VIG-IOC-DOM)