System Sensor DIN rail mounting clip for M2xx series modules
| Part no. | M200E-DIN |
|---|---|
| Brand | System Sensor |
| Range | Addressable Interface modules |
| Sub-range | Enclosure |
Image for illustration; item supplied may differ
At a glance
- DIN Rail BracketThe M200E-DIN is a DIN rail bracket that allows a 200+ series module to be mounted onto DIN rail.
- Standard Top Hat RailIt suits standard 35 mm x 7.5 mm "Top Hat" DIN rail.
- Clip On InstallationThe top clip locates over the DIN rail and the bottom rotates down to clip into place, with the module then pushed into the adaptor until it clips into place.
- Straightforward RemovalTo remove, lift up, then rotate the top away from the rail.
- Alternative Mounting MethodsIt is one of several mounting methods alongside the M200E-SMB custom low profile surface-mounting box and the M200E-PMB Panel Mount Bracket.
Description
Fitting is a clip-on job. The top clip locates over the DIN rail and the bottom is rotated down until it clips into place, after which the 200+ series module is pushed into the adaptor until it clips into place too. Removal is the reverse: lift up, then rotate the top away from the rail. The rail must be the standard 35 mm x 7.5 mm "Top Hat" profile.
The M200E-DIN is a DIN rail bracket, an adaptor that allows a 200+ series module to be mounted onto standard 35 mm x 7.5 mm "Top Hat" DIN rail. It gives installers a rail-mounted option for those modules, standing alongside the M200E-SMB custom low profile surface-mounting box and the M200E-PMB Panel Mount Bracket as one of several ways of mounting the same devices. The module itself is retained by being pushed into the adaptor until it clips into place.
Specifications
| Product name | M200E-DIN DIN Rail Bracket |
|---|---|
| Din rail size | standard 35 mm x 7.5 mm "Top Hat" DIN rail |
| Installation method | Locate top clip over DIN rail and rotate bottom down to clip into place; the module is pushed into the adaptor until it clips into place |
| Removal method | To remove, lift up, then rotate top away from the rail |
Specifications per manufacturer documentation, subject to change. E&OE.
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Installation manual (M200E-DIN, M200E-PMB, M200XE) | Installation | 84 KB | Download PDF |
Optional accessories
- M200E-SMBInterface Enclosure (Small) Plastic Previously listed as S4-34493Alternative mounting accessory to the M200E-SMB custom low profile surface-mounting box£10.83ex VAT£13.00 inc VATIn stock
- M200XELoop isolation module. Requires M200E-SMB for surface mounting or M200E-DIN for mounting to DIN railsM2xx-series module this DIN clip mounts£51.43ex VAT£61.72 inc VATIn stock
- M201EASINGLE OUTPUT MODULE - SYSTEM SENSORM2xx-series module this DIN clip mounts£60.40ex VAT£72.48 inc VATIn stock
- M201EA-240Output control module System Sensor Protocol.M2xx-series module this DIN clip mounts£87.91ex VAT£105.49 inc VATIn stock
- M210EASINGLE INPUT MODULE - SYSTEM SENSORM2xx-series module this DIN clip mounts£57.41ex VAT£68.89 inc VATIn stock
- M210EA-CZAnalogue addressable monitor module for supervision of a conventional zone equipped with capacitive EOL elementM2xx-series module this DIN clip mounts£104.05ex VAT£124.86 inc VATIn stock
- M210EA-CZRAnalogue addressable monitor module for supervision of a conventional zone equipped with EOL resistorM2xx-series module this DIN clip mounts£105.85ex VAT£127.02 inc VATIn stock
- DRM-1BS7273 Door Release Module, additional failsafe to be used in conjunction with Morley-IAS output modules to provide a compliant solution to BS7273-4 Category A requirements. Powered from the 12-24v door magnet supplycompatible / works with: BS7273 Door Release Module, additional failsafe to be used i£139.93ex VAT£167.92 inc VATIn stock
