Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Sales 01509 648840
FireAgent
Basket (0)

Part Number or the Week S3EP-V-VAD-HPR-R

System Sensor SINGLE INPUT MODULE - SYSTEM SENSOR

Part no.M210EA
BrandSystem Sensor
RangeAddressable Interface modules
Sub-rangeInput Module
Morley M210EA Conventional Zone Interface Module — white module with green terminal block and two front rotary screws

Image for illustration; item supplied may differ

DescriptionSpecificationsOptional accessoriesAlso in this range

Description

The Morley M210EA-CZ/M210EA-CZR is a single input conventional zone interface (monitor) module from the redesigned System Sensor M200 wired Input/Output range. It allows conventional detectors to be interfaced to System Sensor analogue addressable systems, available in a CZ variant with EOL capacitor and a CZR variant with EOL resistor. Replacing the earlier M210E-CZ and M210E-CZR parts, it carries a 16.5 V LED cutoff voltage and is rated IP30.

M210EA is a single input conventional zone interface (monitor) module from the redesigned System Sensor M200 wired Input/Output range, made for Morley Addressable Devices. It allows conventional detectors to be interfaced to System Sensor analogue addressable systems, and comes in CZ and CZR variants fitted with an EOL capacitor and an EOL resistor respectively. Replacing the earlier M210E-CZ and M210E-CZR parts, it carries a 16.5 V LED cutoff voltage and is rated IP30.

Read the full technical description

M210EA is a single input conventional zone interface (monitor) module from the redesigned System Sensor M200 wired Input/Output range, made for Morley Addressable Devices. It allows conventional detectors to be interfaced to System Sensor analogue addressable systems, and comes in CZ and CZR variants fitted with an EOL capacitor and an EOL resistor respectively. Replacing the earlier M210E-CZ and M210E-CZR parts, it carries a 16.5 V LED cutoff voltage and is rated IP30.

Zone power is drawn either from the communications line or a 24V PSU, and a single tri-colour LED reports module status. The module can sit on an M200E-SMB low profile surface-mounting box or clip onto a standard 35 mm x 7.5 mm DIN rail inside a control panel or other suitable enclosure. Built-in short circuit isolators and open and short circuit fault monitoring are included, along with remote reset of the conventional zone.

Certified to EN 54-17: 2005 and EN 54-18: 2005, the M210EA works with S300/ECO1000, 100, 400, EC series, and 6500RE/6500RSE optical beam detectors, with IS conventional detector support limited to the CZR variant. It supersedes the M210E series and operates from -20°C to 60°C.

Specifications

Variant m210ea-czM210EA-CZ single input conventional zone module (EOL capacitor)
Variant m210ea-czrM210EA-CZR single input conventional zone module (EOL resistor)
Old part no czM210E-CZ
New part no czM210EA-CZ
Old part no czrM210E-CZR
New part no czrM210EA-CZR
Operating voltage rangeIntelligent Loop Operating Voltage Range: see S00-7100
Led cutoff voltageLED Cutoff Voltage: 16.5 V
Max standby current no commsMax. Standby Current (@24 V and 25 °C) External Supply Conventional Zone, No Communication: 120 µA
Ingress protectionIP30
Box dimensions132 mm (H) x 137 mm (W) x 40 mm (D)
Operating temperature range-20°C to 60°C
Power sourceZone powered from comms line or 24V PSU
Zone isolationWhere the conventional zone is powered from an external power supply, the communication line is fully isolated from the conventional zone and from the power supply.

Specifications per manufacturer documentation, subject to change. E&OE.

Optional accessories

Also in this range