System Sensor Recess mounting kit suitable for flush mounting bases into a false ceiling
| Part no. | RMK400AP |
|---|---|
| Brand | System Sensor |
| Range | Addressable Detection |
| Sub-range | Base Accessories |
Image for illustration; item supplied may differ
At a glance
- Recessed Mounting KitRMK400AP is a System Sensor recessed mounting kit for white sensors.
- Lower Profile Sensor FitIt recesses a sensor base into suspended and drywall ceilings where the application demands a lower profile sensor.
- Up To 20mm ShallowerIt reduces the depth of any System Sensor sensor mounted in a standard 102mm diameter base by up to 20mm.
- Kit DimensionsInterior diameter is 103 mm, exterior diameter 143.5 mm, overall height 31 mm and weight 0.1Kg, with a 107 mm cut-out.
- PC/ABS Pure White BodyThe material is PC/ABS Pure white.
- B501AP B501 And B401It is for use with B501AP, B501 and B401.
- Collar Selection By BaseThe short collars with the two short tabs align with the screw holes on the B501AP base and the high collars with the four longer tabs align with those on the B501 and B401 bases.
- Built In Mounting BracketA special mounting bracket secures the kit and base assembly to the junction box and ceiling panel.
Description
Base coverage for the kit runs to B501AP, B501 and B401. Collar choice follows the base: the short collars with the two short tabs align with the screw holes on the B501AP base, while the high collars with the four longer tabs align with the screw holes on the B501 and B401 bases.
On site the kit is mounted in a suspended ceiling or in drywall, and it may be used with standard junction boxes connected to flexible conduit. The sensor base is inserted into the kit, and the sensor plugs in once the base wiring is done.
RMK400AP is the System Sensor recessed mounting kit that sets a sensor base into suspended and drywall ceilings where the application demands a lower profile sensor. It is the kit for white sensors, the RMK400AP-IV being the one for Ivory coloured sensors. Fitted this way, any System Sensor sensor mounted in a standard 102mm diameter base loses up to 20mm of depth.
The material is PC/ABS Pure white and runs to an interior diameter of 103 mm against an exterior diameter of 143.5 mm, with an overall height of 31 mm and a weight of 0.1Kg. The ceiling cut-out worked for it is 107 mm. A special mounting bracket is built in, securing the kit and base assembly to the junction box and ceiling panel, and standard junction boxes connected to flexible conduit may be used with it.
Read the full technical description
White sensors take RMK400AP itself, while RMK400AP-IV is the version for Ivory coloured sensors. The body is PC/ABS Pure white and the kit weighs 0.1Kg.
RMK400AP is the System Sensor recessed mounting kit that sets a sensor base into suspended and drywall ceilings where the application demands a lower profile sensor. It is the kit for white sensors, the RMK400AP-IV being the one for Ivory coloured sensors. Fitted this way, any System Sensor sensor mounted in a standard 102mm diameter base loses up to 20mm of depth.
The material is PC/ABS Pure white and runs to an interior diameter of 103 mm against an exterior diameter of 143.5 mm, with an overall height of 31 mm and a weight of 0.1Kg. The ceiling cut-out worked for it is 107 mm. A special mounting bracket is built in, securing the kit and base assembly to the junction box and ceiling panel, and standard junction boxes connected to flexible conduit may be used with it.
Drywall and suspended acoustical panel ceilings are the appropriate settings for the kit. Fitting turns on choosing the correct screw collars to match the type of base being used, after which the sensor base is inserted into the RMK400AP.
Specifications
| Product type | RMK400AP(-IV) RECESSED MOUNTING KIT |
|---|---|
| Colour | RMK400AP is for white sensors, the RMK400AP-IV is for Ivory coloured sensors |
| Depth reduction | Reduces the depth of any System Sensor sensor mounted in a standard 102mm diameter base by up to 20mm |
| Ceiling suitability | Appropriate for drywall or suspended acoustical panel ceilings |
| Junction box use | May be used with standard junction boxes connected to flexible conduit |
| Mounting bracket | Incorporates special mounting bracket |
| Interior diameter | 103 mm |
| Exterior diameter | 143.5 mm |
| Cut out diameter | 107 mm |
| Overall height | 31 mm |
| Weight | 0.1Kg |
Specifications per manufacturer documentation, subject to change. E&OE.
Optional accessories
- B501APAnalogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label. PURE WHITEFor use with B501AP, B501 and B401 sensor bases£2.87ex VAT£3.44 inc VATIn stock
