Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Part Number or the Week S3EP-V-VAD-HPR-R

Honeywell 6 watt ceiling loudspeaker c/w metal rear cover (5.5”)

Part no.LSC-506
BrandHoneywell
RangeSpeakers
Honeywell LSC-506 6 W 5 ceiling loudspeaker with fire dome metal, white front and red side visible at angle. — main product photo

Image for illustration; item supplied may differ

Description

The LSC-506 is an EN54-24 approved round 5-inch flush-mounted ceiling loudspeaker with capacitors, designed for voice alarm and fire detection systems. Rated at 6W on a 100V/70V line, it offers selectable power taps (6W/3W/1.5W/0.75W at 100V) and delivers 91 dB at 1W/1m and 88 dB at 6W/4m measured to EN54-24. Its 8-ohm driver and tapped impedances from 1.7K to 13K ohms suit flexible distributed voice-alarm layouts.

The LSC-506 is an EN54-24 approved round 5-inch flush-mounted ceiling loudspeaker with capacitors, designed for voice alarm and fire detection systems and offering full compliance with BS5839 Part 8. Selectable power taps on its 100V/70V line let installers set the output to suit distributed voice-alarm layouts, while the tapped impedances give flexibility across large, zoned systems.

Read the full technical description

The LSC-506 is an EN54-24 approved round 5-inch flush-mounted ceiling loudspeaker with capacitors, designed for voice alarm and fire detection systems and offering full compliance with BS5839 Part 8. Selectable power taps on its 100V/70V line let installers set the output to suit distributed voice-alarm layouts, while the tapped impedances give flexibility across large, zoned systems.

Built-in protection means that damage to an individual loudspeaker does not result in a failure of the wider loudspeaker circuit; ceramic terminal blocks and a thermal fuse provide this integral safeguarding. The flush-mounted design, finished with a metal fire dome, makes the unit well suited to suspended ceilings. It is fitted using the mounting spring on the body, with the fire dome sliding into place over a flying-lead wiring arrangement.

Physical wiring and connection details, including the ceramic terminal blocks and flying leads, are covered in the installation manual rather than here; this datasheet is not intended for installation purposes. For physical connections, refer to the installation manual.

Specifications

Loudspeaker type5" Round Ceiling Loud Speaker
Rated power6W
Power tap at 100v6W/3W/1.5W/0.75W
Power tap at 70v3W/1.5W/0.75W/0.375W
Rated input voltage100V/70V
Rated impedance1.7KΩ/3.3KΩ/6.7KΩ/13KΩ
Driver impedance
Sound pressure level 1w 1m91 dB (1W/1m 100Hz-10kHz pink noise as per EN54-24)
Sound pressure level 1w 4m79 dB (1W/4m, 100Hz-10kHz pink noise as per EN54-24)
Sound pressure level 6w 4m88 dB (6W/4m, 100Hz-10kHz pink noise as per EN54-24)
Frequency response180Hz-20 k Hz
ConnectionCeramic Terminal
Speaker diameter127mm (5")
Hole cut out size155mm

Specifications per manufacturer documentation, subject to change. E&OE.

Documents

DocumentTypeSizeDownload
Datasheet (LSC-506)Datasheet1.0 MBDownload PDF