Gent Flush Plate for 1-8 Panel and Repeat Panel Variants
| Part no. | 13270-29 |
|---|---|
| Brand | Gent |
| Range | Conventional Xenex Panels |
| Sub-range | Repeat Panel |
Image for illustration; item supplied may differ
At a glance
- Control-panel fitFor the Xenex one to eight zone control-panel range.
- Repeat-indicator fitAlso fits the 13271-08LB Xenex repeat panel.
- Semi-flush mountingPositions the panel backbox partly inside the wall.
- Wall apertureRequires a 378mm wide by 245mm high opening with 60mm depth.
- Installed cover gapLeaves approximately 20mm between the shroud and panel outer cover.
- Fixing holesTwelve holes, each 4.5mm in diameter.
Description
The Gent 13270-29 is a flush plate for Xenex control panels and repeat panels. It lets the panel backbox sit partly within the wall, with the flush shroud between the wall and the outer cover. The opening needs to be 378mm wide, 245mm high and 60mm deep. Once fitted, the gap from the shroud to the panel outer cover is about 20mm. The plate has twelve fixing holes, each 4.5mm in diameter. It fits the one to eight zone panel range, including the 13270-02LB, 13270-04LB and 13270-08LB control panels, and the 13271-08LB repeat indicator. The compatible Xenex panel case is 395 x 274 x 87mm.
The 13270-29 provides semi-flush mounting for Xenex control and repeat panels. It fits the one to eight zone control-panel range and the 13271-08LB repeat indicator. The shroud sits around the panel backbox at the wall opening, behind the outer cover.
Read the full technical description
The 13270-29 provides semi-flush mounting for Xenex control and repeat panels. It fits the one to eight zone control-panel range and the 13271-08LB repeat indicator. The shroud sits around the panel backbox at the wall opening, behind the outer cover.
The wall aperture must be 378mm wide, 245mm high and 60mm deep. The backbox is partly recessed into the wall, leaving approximately 20mm between the flush shroud and the panel outer cover.
The flush shroud has twelve fixing holes of 4.5mm diameter. The compatible Xenex panel enclosure measures 395mm wide, 274mm high and 87mm deep. This plate provides the semi-flush mounting option for that enclosure.
Specifications
| Product type | Panel flush plate |
|---|---|
| Control-panel range | Xenex, 1 to 8 zones |
| Repeat-panel fit | 13271-08LB |
| Mounting arrangement | Semi-flush |
| Required aperture width | 378mm |
| Required aperture height | 245mm |
| Required aperture depth | 60mm |
| Shroud-to-cover gap | Approximately 20mm |
| Fixing-hole count | 12 |
| Fixing-hole diameter | 4.5mm |
Specifications per manufacturer documentation, subject to change. E&OE.
Optional accessories
- 13270-02LB2 Zone conventional panel, EN54 less batteries2 zone Xenex control panel this flush plate mounts (1-8 panel variants)£196.14ex VAT£235.37 inc VATIn stock
- 13270-04LBGent 4 Zone conventional panel, EN54 less batteries4 zone Xenex control panel this flush plate mounts (1-8 panel variants)£263.72ex VAT£316.46 inc VATIn stock
- 13270-08LBGent 8 Zone conventional panel, EN54 less batteries8 zone Xenex control panel this flush plate mounts (1-8 panel variants)£339.66ex VAT£407.59 inc VATIn stock
- 13271-08LB8 Zone repeat indicator, less batteriesRepeat panel variant this flush plate mounts£267.31ex VAT£320.77 inc VATIn stock
FAQs
Which panels fit the 13270-29 flush plate?
The 13270-29 fits the Xenex one to eight zone control-panel range and the 13271-08LB repeat indicator. The control-panel models include 13270-02LB, 13270-04LB and 13270-08LB. In each case, the panel backbox is partly recessed into the wall and the flush shroud sits behind the outer cover. The mounting arrangement uses a wall aperture 378mm wide, 245mm high and 60mm deep, with approximately 20mm between the shroud and the panel outer cover once the panel is fitted.
What wall opening is needed for the 13270-29?
The required aperture is 378mm wide, 245mm high and 60mm deep. The 13270-29 shroud sits around the panel backbox at this opening, while the outer cover remains in front of the shroud. The compatible Xenex panel enclosure measures 395mm wide, 274mm high and 87mm deep. Semi-flush installation leaves approximately 20mm between the shroud and the outer cover. This arrangement applies to the Xenex control panels and the 13271-08LB repeat indicator that use the flush plate.
Does the 13270-29 put the panel cover level with the wall?
The 13270-29 creates a semi-flush installation, with the backbox partly within the wall and the outer cover in front of the flush shroud. The installed gap between the shroud and outer cover is approximately 20mm. The recess is 60mm deep, with a required opening width of 378mm and height of 245mm. The shroud fits both the Xenex control-panel enclosure and the 13271-08LB repeater enclosure, and has twelve fixing holes, each 4.5mm in diameter.
What fixing holes does the 13270-29 have?
The flush shroud has twelve fixing holes, each 4.5mm in diameter. It surrounds the backbox where the panel sits partly within the wall, behind the outer cover. The required wall opening is 378mm wide, 245mm high and 60mm deep, and the installed shroud-to-cover gap is approximately 20mm. The same 13270-29 mounting accessory fits the Xenex one to eight zone control-panel range and the 13271-08LB repeat indicator. The compatible panel enclosure is 395mm wide and 274mm high.
Is the 13270-29 the same item as XENS-FLAP?
The 13270-29 is the flush plate used to mount a Xenex control or repeat panel partly within a wall. XENS-FLAP is the separate Xenex spare for replacement mouldings and cover plates. The 13270-29 mounting arrangement uses a 378mm wide, 245mm high and 60mm deep wall opening, with about 20mm between the flush shroud and the panel outer cover. It fits the Xenex one to eight zone control-panel range as well as the 13271-08LB repeat indicator.