Honeywell 4 Ch 2000W Class D Amp w/ Power Sharing
| Part no. | 585034 |
|---|---|
| Brand | Honeywell |
| Range | V1 Voice Rack |
| Sub-range | Rack Components |
Image for illustration; item supplied may differ
At a glance
- Power Sharing TechnologyPower Sharing technology supports configurable allocation of 2000W power, each channel 500W/100V at maximum.
- Constant Voltage Direct OutputThe 4XDPS2000 is a constant voltage audio power amplifier with direct output to speakers, based on class D amplifier modules technology.
- Rotary Output Power SettingThe channel rotary switch marked OUTPUT POWER sets channel output power with a switch step at 10% of maximum power, the factory default being 100% of maximum.
- Mains and Backup SupplyMains voltage is 230V AC, ± 10% across 50 to 60 Hz, with an external 24V DC (-10%+15%) backup power supply.
- 2 HU Metal HousingThe metal housing is 90 height (2U) x 483 width x 402 deep, weighs 11.5 Kg and is finished in RAL 810-M.
- Fan Assisted CoolingTemperature management uses variable speed fan assisted cooling, with protection against overheating and protection against overload & wiring short.
- Selectable Operation ModesChannel Enable, Channel Disable and Power Saving Mode are the operation modes, while the CONFIG DIP switch covers signal LEDs sensitivity, DC monitoring and CAN address.
- Audio Performance FiguresDistortion at the rated power is < 0,06% THD at 1 kHz sine wave and efficiency at a maximum load is ≥ 80% typical (Mains powered).
Description
Power Sharing technology supports configurable allocation of 2000W power, each channel 500W/100V at maximum, and the four channels are set individually on the channel rotary switch.
The amplifier drives speakers directly at 100V, with four outputs at the back for connection to the GNP Controller/ VARIODYN® Dl DOM module, and audio reaches it through the connectors marked AUDIO INPUT from a VARIODYN® ONE INC or VARIODYN® Dl DOM. An external 24V DC backup power supply is taken to the BACKUP SUPPLY connector, giving a fully monitored standby feed should the mains fail. The CONFIG DIP switch handles signal LEDs sensitivity, DC monitoring and CAN address, all switches sitting in the OFF position by factory default.
The 4XDPS2000, part number 585034, is a constant voltage audio power amplifier with direct output to speakers, based on class D amplifier modules technology improved by a Power Sharing feature. It carries 4 Channels and 2000W in total with Power Sharing Technology, in a unit of 2 HU standard height, each channel capable of 500W/100V at maximum.
Channel output power is set by the channel rotary switch marked OUTPUT POWER, whose step is 10% of maximum power, the factory default for each channel being 100% of maximum. Mains voltage is 230V AC, ± 10% over a mains frequency range of 50 to 60 Hz through an IEC connector, while an external 24V DC (-10%+15%) feed acts as backup power supply. Channel Enable, Channel Disable and Power Saving Mode are the operation modes.
Read the full technical description
Each channel shows Power, High and Low on green LEDs with Clip and Error on yellow, beside general indicators for Mains Power, System Fault, Battery Power and Signature Ring. The unit is protected against overheating and against overload and wiring short.
The 4XDPS2000, part number 585034, is a constant voltage audio power amplifier with direct output to speakers, based on class D amplifier modules technology improved by a Power Sharing feature. It carries 4 Channels and 2000W in total with Power Sharing Technology, in a unit of 2 HU standard height, each channel capable of 500W/100V at maximum.
Channel output power is set by the channel rotary switch marked OUTPUT POWER, whose step is 10% of maximum power, the factory default for each channel being 100% of maximum. Mains voltage is 230V AC, ± 10% over a mains frequency range of 50 to 60 Hz through an IEC connector, while an external 24V DC (-10%+15%) feed acts as backup power supply. Channel Enable, Channel Disable and Power Saving Mode are the operation modes.
The metal housing weighs 11.5 Kg, is finished in RAL 810-M and has overall dimensions of 90 height (2U) x 483 width x 402 deep. Efficiency at a maximum load is ≥ 80% typical (Mains powered), distortion at the rated power is < 0,06% THD at 1 kHz sine wave, and the amplifier is rated -5°C to +55°C with relative humidity up to 93% (non condensing), cooled by temperature management with variable speed fan assisted cooling.
Specifications
| Model name | 4XDPS2000 |
|---|---|
| Part no | 585034 |
| Description | 4 Channels and 2000W in total with Power Sharing Technology |
| Standard height | 2 HU |
| Amplifier type | Constant voltage audio power amplifier with direct output to speakers, based on Class D amplifier modules technology, improved by Power Sharing feature |
| Channels | 4-channel Direct-Drive amplifier for voice alarm application that utilise industry standard 100V speakers |
| Power sharing | Power Sharing technology that supports configurable allocation of 2000W power, each channel 500W/100V at maximum |
| Output power control | Rotary Switch - channel output power can be defined by the channel rotary switch marked 'OUTPUT POWER' with the switch step at 10% of maximum power |
|---|---|
| Maximum power setting per channel | Maximum Power Setting per single channel [100%] is 500W/100V. Number of enabled channels by RJ-45 interface(s): 4/2 channels. |
| Mains voltage | 115V to 250V AC, ± 10% |
| Mains frequency range | 50 to 60 Hz |
| Backup power supply | 24V DC (-10%+15%) |
| Backup supply connection | External 24V DC backup power supply is connected to the unit at the 'BACKUP SUPPLY' connector. The fully monitored 24V DC stand by backup supply is used in the event of mains supply failure. |
| Main supply connection | The mains power to the unit is via an IEC connector |
Specifications per manufacturer documentation, subject to change. E&OE.
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Datasheet (585033, 585034) | Datasheet | 214 KB | Download PDF |