System Sensor Low Profile OpticalSmoke Sensor c/w Isolator - White. Requires B501AP base
| Part no. | 22051EI-26 |
|---|---|
| Brand | System Sensor |
| Range | Addressable Detection |
| Sub-range | Detector |
Image for illustration; item supplied may differ
At a glance
- Optical Smoke SensorThe 22051EI-26 is an analogue addressable optical smoke sensor of the S200A series.
- Isolator IncludedThe sensor is supplied complete with an isolator.
- Low Profile WhiteIt has a low-profile housing finished in white.
- Requires B501AP BaseA B501AP base is required for this sensor.
- System Sensor ProtocolIt is listed under the System Sensor Protocol Analogue Addressable Field Devices section of the Honeywell Morley-IAS catalogue.
- Duct Housing DetectorIt is the detector used with the addressable duct detector housing, which is supplied with a B501AP base but without the detector.
Description
The 22051EI-26 is a low-profile optical smoke sensor from the S200A series, finished in white and supplied with a built-in isolator. It is an analogue addressable field device for Morley-IAS System Sensor Protocol systems.
A B501AP base is required and is ordered separately. The sensor is also the detector specified for the addressable duct detector housing, which ships complete with a B501AP base for 22051E-26 or 22051EI-26 detectors, the detector not being supplied with the housing.
Read the full technical description
The 22051EI-26 is the S200A Optical Smoke Sensor with Isolator in white. It is a low-profile analogue addressable optical smoke sensor supplied complete with an isolator, and it requires a B501AP base.
It is listed under the ADDRESSABLE SYSTEMS - System Sensor Protocol Analogue Addressable Field Devices section of the Honeywell Morley-IAS catalogue. The same sensor is the detector used with the addressable duct detector housing, which comes complete with a B501AP base for 22051E-26 or 22051EI-26 detectors and is supplied without the detector itself.
Specifications
| Product range | Mark II Addressable Speech Sounder and Strobe Devices |
|---|---|
| Operating voltage | Operating voltage range 35V - 41V |
| Operating temperature | -10 ° C to 50 ° C |
| Storage temperature | -20 ° C to 70 ° C |
| Relative humidity | (non condensing) up to 90% |
| Ingress protection | IP55C / IP31C (deep base 40mm gives IP55C, shallow base 25mm gives IP31C) |
| Weight | 0.3Kg (approximate) |
| Deep base depth | 40mm depth |
|---|---|
| Shallow base depth | 25mm depth |
| Enclosure material | Flame retardant ABS (Strobe cover is polycarbonate). The plastic enclosures meet the flammability requirements of ISO 1210:1992 Class FH-2. |
| Enclosure colour | White and Red (with red translucent lens cover for the Strobe) |
| Strobe lens | (red lens) |
| Strobe light output | Strobe light output with red lens equivalent to 3W Xenon flasher |
| Ir operating distance | 3m (used for selecting volume level) |
Specifications per manufacturer documentation, subject to change. E&OE.
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Datasheet (22051E-26, 22051EI-26) | Datasheet | 262 KB | Download PDF |