Automatic Fire Detection · System Sensor AGILE
Agile 22051TLE-RF-26 Wireless Multi-Criteria Detector
- Ordering code
- 22051TLE-RF-26
- Detector type
- Photo-Thermal-IR
- Product category
- Automatic Fire Detection
- Batteries
- 4 CR123A 3V
- Radio frequency
- 865-870 MHz
- Operating temperature
- -30: 60 °C
- Fire standard
- EN54-25 EN54-5 EN54-7
You will also need
Needed to install, power or certify this product.
Agile Wireless Detector/Repeater Base. Base for Agile wireless detectors, repeater and sounder
required mounting base (dimensions quoted with B501RF)
Overview
What it is and how it fits the system.
The 22051TLE-RF-26 is a Series 200 Wireless multi-criteria detector in the Agile Wireless Fire Detection System, fusing photoelectric, thermal and infrared sensing for automatic fire detection without wiring. It transmits on the 865-870 MHz band at under 25mW e.r.p. and is powered by four CR123A 3V batteries. Rated for -30 to 60 degrees C at 10-93% RH non-condensing, it measures 102mm in diameter and 70mm high on the B501RF base.
Technical overview
22051TLE-RF-26 is a Series 200 Wireless multi-criteria detector in the Agile Wireless Fire Detection System. It fuses photoelectric, thermal and infrared sensing for automatic fire detection without wiring, operating on the 865-870 MHz band at under 25mW e.r.p. Powered by four CR123A 3V batteries, it is rated for -30 to 60 °C at 10-93% RH non-condensing and measures 102mm in diameter and 70mm high with the B501RF base. The device weighs 200g with batteries installed and 263g in its package. It complies with EN54-25, EN54-5 and EN54-7 fire standards and mounts on the B501RF base.
Addresses are set using S200 rotary switches, and it uses S200 CLIP and Advanced Protocol for loop communication. Configuration and diagnosis are performed via the AgileIQ PC-based software tool, and it integrates into existing panels as part of the Agile Wireless Fire Detection System, supporting up to 50 wireless devices per Loop-powered Gateway (M200G-RF-26 / M200F-RF). Physical wiring details are documented in the installation manual.
Specifications
Full technical data for this part.
| Ordering code | 22051TLE-RF-26 |
|---|---|
| Detector type | Photo-Thermal-IR |
| Product category | Automatic Fire Detection |
| Batteries | 4 CR123A 3V |
| Radio frequency | 865-870 MHz |
| Transmit power | <25mW e.r.p. |
| Operating temperature | -30: 60 °C |
| Humidity no condensation | 10: 93 %RH |
| Length diameter | 102mm |
| Height | 70mm (with B501RF base) |
| Weight with batteries | 200g |
| Package weight | 263g |
| Fire standard | EN54-25 EN54-5 EN54-7 |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Optional accessories
Optional additions — this product works without them.
Agile Gateway. Loop-powered Gateway device for System Sensor Agile wireless system. Up to 8 Gateways may be used on the same loop. This requires a B501AP base. Compatible with DXc panels only
Communicates via Loop powered Gateway (M200G-RF-26 / M200F-RF), up to 50 wireless devices
Agile Repeater. Network Repeater for extending the range of System Sensor Agile wireless networks. Powered by 4 x CR123A 3v batteries
Communicates via Loop powered Gateway (M200G-RF-26 / M200F-RF), up to 50 wireless devices
Datasheets & documents
Reference downloads.
- 823 KB