Beam Detection 6500 Range
6500-LRK Long Range Reflector Kit, Beam Detector 70-100m
- Installation distance range
- 70 to 100 metres
- Reflectors required
- Four 20cm x 20cm reflectors must be used to provide enough reflected infrared light
- Kit contents
- 3 additional reflectors with new test scale legends
- Reflector size
- 20cm × 20cm
- Included reflector 1
- 1 20cm × 20cm reflector (10% to 25% test scale)
- Included reflector 2
- 1 20cm × 20cm reflector (30% to 65% test scale)
- Included reflector 3
- 1 20cm × 20cm reflector (no test scale)
Overview
What it is and how it fits the system.
The 6500-LRK is a Long Range Reflector Kit for use with a projected beam smoke detector, enabling reflected beam detectors to be installed at distances from 70 to 100 metres. Four 20 cm x 20 cm reflectors are required to return sufficient infrared energy at range, and the kit supplies three additional reflectors with new test scale legends. It is the dedicated accessory for extending beam-detector coverage across large open spaces.
Technical overview
6500-LRK is a long range reflector kit designed for use with projected beam smoke detectors in the 6500 range. It enables operation over distances between 70 and 100 metres by providing additional reflectors to boost infrared signal return.
The kit includes three 20cm x 20cm reflectors, each with distinct test scale legends for alignment and sensitivity verification. One reflector features a 10% to 25% test scale, another a 30% to 65% test scale, and the third has no test scale.
These are used alongside the original reflector supplied with the transmitter/receiver unit to meet the requirement of four reflectors total for adequate signal reflection at extended ranges. Installation, mounting and system testing must follow the procedures outlined in the beam detector’s manual, with physical wiring details referenced separately.
Specifications
Full technical data for this part.
| Installation distance range | 70 to 100 metres |
|---|---|
| Reflectors required | Four 20cm x 20cm reflectors must be used to provide enough reflected infrared light |
| Kit contents | 3 additional reflectors with new test scale legends |
| Reflector size | 20cm × 20cm |
| Included reflector 1 | 1 20cm × 20cm reflector (10% to 25% test scale) |
| Included reflector 2 | 1 20cm × 20cm reflector (30% to 65% test scale) |
| Included reflector 3 | 1 20cm × 20cm reflector (no test scale) |
| Manufacturer reference | Pittway Tecnologica Srl, Via Caboto 19/3, 34147 Trieste, ITALY © System Sensor 2010 I56-2680-002 |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Optional accessories
Optional additions — this product works without them.
Conventional Reflective Beam. Uses the same accessories as the 6500 conventional beams. Please see conventional section to find these accessories
Long-range reflector kit for use with the reflective/projected beam detector (transmitter/receiver unit)
Multi Mount Kit for IR reflective beam. Provides ceiling and wall mount swivel brackets. Note: Requires 6500-SMK
compatible / works with: Multi Mount Kit for IR reflective beam. Provides ceiling and