System Sensor BEAMHK Heater Kit for Reflected Beam Detectors
Images are representative and may not show the exact item supplied; product and specifications subject to change — E&OE. Spotted an issue? Let us know.
- Brand
- VESDA
- Manufacturer part number
- BEAMHK
- Datasheet
- On request — ask our team
- EN 54 part / class
- —
- Load factor per device
- —
- Max quantity per loop
- —
Overview
What it is and how it fits the system.
The System Sensor BEAMHK is a Heating Kit for use with the Transmitter/ Receiver Unit of Reflected Beam Smoke Detectors, for environments prone to the formation of condensation. Voltage: 15 to 32 V, Nominal: 1.6 W at 24 V.
Technical overview
The BEAMHK is a System Sensor Heating Kit for use with the Transmitter/ Receiver Unit of Reflected Beam Smoke Detectors.
The BEAMHK allows the transmitter/receiver of the reflected beam smoke detectors to operate in environments prone to the formation of condensation. The kit includes the following parts: 1 Transmitter/Receiver Heater Assembly.
Electrical specifications are Voltage: 15 to 32 V, Current: 92mA max at 32 V, Power Consumption Nominal: 1.6 W at 24 V and Maximum: 3 W at 32 V. The power supply must be capable of powering the heater, and other devices that may be supplied through the same terminals.
The heater is intended for the prevention of condensation only. It is not intended to increase or reduce the specified operating temperature range of the beam smoke detector. Align/realign beam smoke detector.
Specifications
Full technical data for this part.
| Voltage | 15 to 32 V |
|---|---|
| Current | 92mA max at 32 V |
| Power consumption nominal | Nominal: 1.6 W at 24 V |
| Power consumption maximum | Maximum: 3 W at 32 V |
| Package contents | 1 Transmitter/Receiver Heater Assembly |
| Document number | I56-2556-002 |
| Warranty | Three-year limited warranty; free from defects in materials and workmanship under normal use and service for a period of three years from date of manufacture |
| Heater function note | The heater is intended for the prevention of condensation only. It is not intended to increase or reduce the specified operating temperature range of the beam smoke detector. |
| Current requirement note | The electrical current specified is the requirement for the heater only. The power supply must be capable of powering the heater, and other devices that may be supplied through the same terminals. |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know