Aspirating Smoke Detection
Honeywell F-PC-HE-2 ASD Sampling Clip 2.0mm Harsh Env
- Sampling hole diameter
- 2.0mm (5/64)
- Variant
- Harsh Environment
- Main colour
- RED
- Length
- 55 mm
- Width
- 30.5 mm
- Weight
- 11 g
- Tube outer diameter
- 25 mm - 27 mm
Overview
What it is and how it fits the system.
The Honeywell F-PC-HE-2 is a Harsh Environment ASD sampling hole clip from the Honeywell/Xtralis CLIP Hole Identification System, supplying a pre-engineered 2.0mm (5/64) sampling hole for aspirating smoke detection pipe networks. Moulded in PC/ABS with a RED main colour and RAL9005 body, it fits tube of 25mm to 27mm outer diameter. At 55mm long, 30.5mm wide and 11g, it delivers consistent, colour-coded hole sizing without on-site drilling.
Technical overview
F-PC-HE-2 pairs a red main colour with a pre-engineered 2.0mm (5/64) sampling hole, a Harsh Environment variant clip in the Honeywell/Xtralis CLIP Hole Identification System for FAAST and VESDA aspirating smoke detection (ASD) pipe networks.
Two design details address demanding installations: a flexi-lip intended to help reduce sampling hole leakage, and a chamfered hole entry that reduces dust loading effects, helping to increase uptime and potentially extending test intervals.
On the pipe, the one-piece clip clicks into a firm, non-slip position without part assembly or tools, fitting ASD network tube of 25 mm to 27 mm outer diameter; 10mm drill holes are created at the sampling points beforehand. Colour coding is assigned to the IEC 60062 standard resistor code, and physical connections are covered in the installation manual, with the installation instructions followed to ensure full functionality.
Specifications
Full technical data for this part.
| Description | ASD SPL PT CLIP HE 2.0mm (5/64) |
|---|---|
| Sampling hole diameter | 2.0mm (5/64) |
| Variant | Harsh Environment |
| Main colour | RED |
| Length | 55 mm |
| Width | 30.5 mm |
| Weight | 11 g |
| Tube outer diameter | 25 mm - 27 mm |
| Colour body | RAL9005 |
| Material | PC/ABS |
| Colour rubber | Variable material TPE |
| Maximum pipe network pressure | 7 bar ( -30 °C +45 °C) |
| Application temperature range | -30 °C +45 °C* (application where ambient temperature will exceed 45°C may lead to clip sealing leakage up to 5%) |
| Application humidity range | 5% to 95% Relative Humidity |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Datasheets & documents
Reference downloads.
- 149 KB
- 187 KB