Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Gent, Morley-IAS and Xtralis stock added weekly. Open to the trade.

VESDA H2 1000PPM MODBUS REL XCL VEA

Part no.XCL-VEA-H2-RM
BrandVESDA
RangeGas Detection XCL

Image for illustration; item supplied may differ

At a glance

  • Hydrogen at 1000ppmThe gas detected is Hydrogen (H2) at 1000ppm on a factory calibrated detector.
  • Modbus RTU Digital LinkThe detector puts out Modbus RTU on an RS 485 Modbus line.
  • Twin Power RelaysTwo relays carry 5 A across 24 V DC / 240 V AC contacts.
  • VSC and VSM4 VisibilityOperating status of the Modbus version reaches VSC and VSM4 through their integration.
  • Microbore Tube FittingThe head takes VESDA-E VEA micro bore tube sized 6 mm (1/4”) OD, with VEA tubes entering the flexible tubing by 15mm (0.6 in) or more.
  • Sealed Detector BodyRated IP65, Type 4 (NEMA 250), the polycarbonate (charcoal colour) enclosure runs to 113 x 113 x 59 mm at 500 g.

Description

Battery rooms, fuel storage areas and confined spaces are among the settings for XCL-VEA-H2-RM, which places hydrogen measurement in-line within the VESDA-E VEA microbore tube network.

Its polycarbonate housing, charcoal in colour, spans 113 x 113 x 59 mm at 500 g and holds an IP65, Type 4 (NEMA 250) rating. Ambient limits are −20 °C to +50 °C in use and 0 °C to +30 °C in store. Integral alarm status LEDs indicate locally, and a Bluetooth 4.0 (Bluetooth Low Energy) link reaches a compatible smart device up to 10m off (mobile device dependent).

XCL-VEA-H2-RM is a hydrogen gas detector covering 1000ppm, factory calibrated and placed in-line in a VESDA-E VEA microbore tube network using flexible tubes. It joins VESDA-E VEA micro bore tube sized 6 mm (1/4”) OD, and every VEA tube enters the flexible tubing by 15mm (0.6 in) or more.

Output is digital: a Modbus RTU stream on an RS 485 Modbus line, backed by two relays that carry 5 A across 24 V DC / 240 V AC contacts. Remote visibility comes from VSC and VSM4 integration covering Modbus version detector operating status, and the detector also drops into PLCs, HVAC, BMS or FACP.

Read the full technical description

EN/UL/IEC61010-1 conformity sits alongside CSA-C22.2 No. 61010-1-12 certification; EN 50270 covers EMC while RED, FCC and BT SIG cover radio, and AS 1668.2 also applies. XCL-XRL-SC-H2 renews the sensing element, and XCL-VEA-CAL, XCL-FILTER, XCL-M20-CG and XCL-COVER complete the service set.

XCL-VEA-H2-RM is a hydrogen gas detector covering 1000ppm, factory calibrated and placed in-line in a VESDA-E VEA microbore tube network using flexible tubes. It joins VESDA-E VEA micro bore tube sized 6 mm (1/4”) OD, and every VEA tube enters the flexible tubing by 15mm (0.6 in) or more.

Output is digital: a Modbus RTU stream on an RS 485 Modbus line, backed by two relays that carry 5 A across 24 V DC / 240 V AC contacts. Remote visibility comes from VSC and VSM4 integration covering Modbus version detector operating status, and the detector also drops into PLCs, HVAC, BMS or FACP.

The Modbus supply window runs 9 to 32V DC around a nominal 24 VDC, with 24V AC 50/60Hz as the alternative; the 24V DC inrush figure is 850 mA and adding relays draws a further 0.6W total. Pluggable rising clamp terminals accept 0.5 to 1.5 mm² conductors, humidity is allowed across 0 to 99% (non-condensing) and pressure across 95 to 110 kPa.

Specifications

Ordering codeXCL-VEA-H2-RM
DescriptionVESDA Sensepoint XCL H 2 1000ppm Modbus Relay for VEA
Hydrogen detection rangeHydrogen (H 2 ): 1000ppm
Product familyVESDA Sensepoint XCL MICRO BORE
Supply voltage24 VDC nominal; 11 to 32V DC (Analog 4-20 mA); 9 to 32V DC (Modbus); 24V AC 50/60Hz Nominal (20 to 27 VAC)
Maximum power consumption 24v dc0.7 W (Modbus) (toxic), 1.2W (flammable and CO 2 ); Relay Version: additional 0.6W total
Maximum inrush current 24v dc850 mA
OutputAnalog Output: 0 to 22 mA; Digital Output: Modbus RTU; Relay Output: 2 relays (24 V DC / 250 V AC, 5 A)
Dimensions wxhxd113 x 113 x 59 mm (4.4 x 4.4 x 2.3 in)
Weight500 g (1.1 lb)
Ingress protectionIP65, Type 4 (NEMA 250)
Casing materialPolycarbonate (charcoal colour)
Operating temperature−20 to +50 °C (−4 to +122 °F)
Storage temperature0 to +30 °C (+32 to +86 °F)

Specifications per manufacturer documentation, subject to change. E&OE.

Spares & replacement parts