Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Sales 01509 648840
FireAgent
Basket (0)

Gent, Morley-IAS and Xtralis stock added weekly. Open to the trade.

VESDA-E VEA-40 Det with 3.5" Display

Part no.VEA-040-A10
BrandVESDA
RangeVESDA VEA
Sub-rangeVEA Panel
Xtralis VEA-040-A10 VESDA-E VEA-40 Det with 3.5" Display — white rectangular unit with black top and 3.5" display

Image for illustration; item supplied may differ

At a glance

  • Colour LCD Status ScreenVEA-040-A10 features a 3.5” colour LCD display which shows detector status.
  • Screen Information RangeThe display provides a range of status information including alarm and fault conditions as well as smoke level.
  • Sensitivity SpanSensitivity covers 0.020%/m (0.006%/ft) - 16%/m (4.88%/ft).
  • Two General Purpose InputsTwo GPIs are provided, monitored and unmonitored.
  • Peak Current In ScanPeak current in scan mode is 3.5A (for initial 5 seconds of scanning).
  • Twenty Thousand Event LogUp to 20,000 events are stored in FIFO format with time and date stamp.
  • Weight And Cable EntriesThe detector weighs 10 kg (22.2 lbs) and takes 4 x 25 mm (1”) cable entries.
DescriptionSpecificationsOptional accessoriesSpares & replacement parts

Description

VEA-040-A10 carries a 3.5” colour LCD display, showing alarm state, fault state and smoke level at the unit itself. Air is drawn through microbore sampling tubes into laser detection chambers.

The detector weighs 10 kg (22.2 lbs), and cable access is by 4 x 25 mm (1”) cable entries.

VEA-040-A10 is the VESDA-E VEA-40 aspirating smoke detector fitted with a 3.5” colour LCD display alongside its status LEDs. That screen provides a range of status information including alarm and fault conditions as well as smoke level, and screens for each type of information are available using a simple navigation system.

Sensitivity covers 0.020%/m (0.006%/ft) - 16%/m (4.88%/ft), with Alert and Action giving two pre alarm levels. Two GPIs, monitored and unmonitored, are provided, and peak current reaches 3.5A (for initial 5 seconds of scanning). Capillary tubes of variable length may be run up to 100 m.

Read the full technical description

VESDA detectors and devices communicate on VESDAnet, a bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDA-E detectors also offer connectivity to corporate networks via Ethernet, so machines running Xtralis monitoring and configuration software can reach the detector. The optional Relay StaX module can be used to identify and signal fire source locations on a fire panel loop.

VEA-040-A10 is the VESDA-E VEA-40 aspirating smoke detector fitted with a 3.5” colour LCD display alongside its status LEDs. That screen provides a range of status information including alarm and fault conditions as well as smoke level, and screens for each type of information are available using a simple navigation system.

Sensitivity covers 0.020%/m (0.006%/ft) - 16%/m (4.88%/ft), with Alert and Action giving two pre alarm levels. Two GPIs, monitored and unmonitored, are provided, and peak current reaches 3.5A (for initial 5 seconds of scanning). Capillary tubes of variable length may be run up to 100 m.

Blockage and breakage are watched at set intervals down to a single sampling point and a single tube, while sampling point presence and tube breakage detection also runs automatically at those intervals. Up to 20,000 events are stored in FIFO format, recording smoke level, user actions, alarms and faults with time and date stamp. Approvals cover CE, UKCA, VdS, FM and ActivFire (ISO 7240-20); approvals and regulatory compliance differ by region and by model.

Specifications

Documentation numberDocumentación: 33037_05
Addressable sampling tubes40 tubos de calibre estrecho direccionables con puntos de muestreo individuales
Capillary tube lengthTubos capilares de longitud variable, de hasta 100 m
Detection methodDetección absoluta de humos vía láser
Laser classificationProducto láser de Clase 1 que cumple con la normativa 21 CFR 1040.10 de la FDA
DisplayPantalla táctil en color de 3,5" para visualización de estados
IndicatorsLuces LED para alarmas y señalización de fallos
Sensitivity settingsTres ajustes de sensibilidad para los puntos de muestreo
IP RatingCarcasa IP 40 (no probado para UL)
General purpose ioDos Entrada/Salida (GPI), supervisados y no supervisados
Programmable relaysSiete relés programables
EthernetEthernet 100 base T
WifiWiFi, 802.11 b/g/n
USB portPuerto USB localhost
Network connectivityConectividad de red VESDAnet
Event logRegistro de eventos (20 000 eventos)
MountingMontaje fácil con soporte de apoyo de acero
Field replaceable partsFiltro, módulo de sensor de humo, bomba y válvula giratoria sustituibles "in situ"
Automatic cleaningLimpieza automática de los puntos de muestreo
Blockage detectionDetección de bloqueo de un solo punto de muestreo o de un solo tubo
Power supply requirementEl producto debe usar una fuente de alimentación conforme a EN 54-4 y EN60950-1 Sección 2.5.
Psu voltage referencePSU EN 54-4 (que proporciona 24 V CC)
Sensitivity open areas 914 1219Protección de áreas abiertas, velocidad del aire de 914/1219 m/min: Alta, 1,6 %/m
Sensitivity open areas 91 304 609Protección de áreas abiertas, velocidad del aire de 91/304/609 m/min: De alta, 1,6 %/m, a mejorada, 4,0 %/m.
Sensitivity open areas 0 91Protección de áreas abiertas, velocidad del aire de 0 a 91 m/min: De alta, 1,6 %/m, a estándar, 8,0 %/m.
Sensitivity special applicationAplicación especial: De alta, 1,6 %/m, a estándar, 8,0 %/m.
Sampling tube impact resistanceResistencia ante impacto: 0,5 kg, altura de caída de 100 mm
Sampling tube compression resistanceResistencia de compresión: 125 N
Temperature rangeIntervalo de temperatura: de -15 °C a +60 °C
standard_EN54-20EN 54-20
EN54-20_airflow_supervision_conditionCumple con los requisitos de supervisión de flujo de aire EN 54-20 siempre que la sensibilidad ante fallos de flujo de aire se establezca en REDUCIDA ("NARROW"). El retardo de fallo de flujo debe establecerse en un valor que no supere los cuatro minutos.
EN54-20_class_A_settingPara un detector de clase A, la sensibilidad debe establecerse en ALTA ("HIGH")
EN54-20_class_B_settingPara un detector de clase B, la sensibilidad debe establecerse en MEJORADA ("ENHANCED").
EN54-20_class_C_settingPara un detector de clase C, la sensibilidad debe establecerse en ESTÁNDAR ("STANDARD").
EN54-20_approval_configLa configuración de aprobaciones en la página de configuración del módulo debe establecerse en EN54-20 mediante VSC-E versión 3.06.00, compilación 4744 o posterior.
Sampling tube standard complianceEl tubo de muestreo debe cumplir con los requisitos de la norma EN 54-20, cláusula 5.7 Resistencia mecánica de las tuberías
FCC_complianceCumple con los límites de un dispositivo digital de Clase B, conforme a la parte 15 de la Normativa FCC.
RED_directive_cable_lengthPara cumplir con la Directiva de equipos de radio (RED), cuando la característica WiFi está habilitada en un entorno que no es un "entorno industrial o centro de telecomunicaciones", el cable entre la unidad y la PSU EN 54-4 (que proporciona 24 V CC) debe ser más corto que 3 m.
Japan_WiFi_requirementPara cumplir con los requerimientos de la normativa Japonesa, las funciones WiFi deberán ser deshabilitadas.
System integrity supervisionDetección asegurada con supervisión integral de integridad del sistema

Specifications per manufacturer documentation, subject to change. E&OE.

Optional accessories

+ 3 more

Spares & replacement parts