Air Filter Assembly · FAAST
Xtralis F-A3384-000 FAAST 8100 Air Filter Assembly
- Product type
- Air Filter Assembly
- Filter rating
- 30 micron filter
- Supplied state
- comes fully assembled and ready to use
- Mounting
- Secured to the unit with two Philips head screws (filter mounting screws), located behind the Display Door under the User Interface Card
- Screw torque
- 6in-lb (0.7N-m) or ¼ turn past “lightly snug”. DO NOT OVER TIGHTEN.
- Service mode behaviour
- If power is not removed, the unit automatically enters Service Mode when the screws are removed from the filter; this removes power from the fan and the sensing chamber, the filter fault indicator is illuminated and the urgent relay is set.
- Document reference
- I56-3743-003
Overview
What it is and how it fits the system.
The Xtralis F-A3384-000 is a replacement air filter assembly for FAAST 8100 series aspiration detectors, supplied fully assembled and ready to use. It uses a 30-micron filter and secures to the unit with two Philips head screws torqued to 6in-lb (0.7N-m), or a quarter turn past lightly snug. If power is not removed during replacement, the unit automatically enters Service Mode.
Technical overview
F-A3384-000 is an air filter assembly from Xtralis, designed as a replacement component for the FAAST 8100 series aspiration detectors. It is supplied fully assembled and ready to use, featuring a 30-micron filter media for particulate capture in air sampling systems. The assembly secures to the detector unit using two Philips head screws located behind the Display Door, beneath the User Interface Card, with a specified torque of 6in-lb (0.7N-m) or a quarter turn past lightly snug to avoid over-tightening.
During filter replacement, if power remains connected, the FAAST 8100 series detector automatically enters Service Mode upon screw removal. This action disconnects power to the fan and sensing chamber, illuminates the filter fault indicator, and activates the urgent relay to signal maintenance status. The component is referenced in documentation I56-3743-003 and is intended exclusively for use with FAAST 8100 series systems, installed internally behind the display interface. Physical wiring details for the host unit are addressed in the associated installation and maintenance instructions.
Specifications
Full technical data for this part.
| Product type | Air Filter Assembly |
|---|---|
| Filter rating | 30 micron filter |
| Supplied state | comes fully assembled and ready to use |
| Mounting | Secured to the unit with two Philips head screws (filter mounting screws), located behind the Display Door under the User Interface Card |
| Screw torque | 6in-lb (0.7N-m) or ¼ turn past “lightly snug”. DO NOT OVER TIGHTEN. |
| Service mode behaviour | If power is not removed, the unit automatically enters Service Mode when the screws are removed from the filter; this removes power from the fan and the sensing chamber, the filter fault indicator is illuminated and the urgent relay is set. |
| Document reference | I56-3743-003 |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know