Addressable Interface modules

Morley MCX-55 Addressable I/O Interface Module

Name: Morley MCX-55 Addressable I/O Interface Module
Brand: Morley Addressable Devices
SKU: 797-065
Price: 222.46 GBP
Availability: InStock

Addressable Interface modules797-065

797-065

Available

£185.38ex VAT£222.46 inc VAT

Volume pricing

Indicative volume pricing at these quantities.

Qty	Ex VAT	Inc VAT
1+	£185.38	£222.46
5+	£179.82	£215.78
10+	£177.04	£212.45
20+	£174.26	£209.11

Qty

Key spec

Current consumption: 1.7mA with communication and LED blink enabled
Led current: 5mA @ 24Vdc (LED on) per module
Output relay: Each output consists of a form C (change over) relay contact providing both normally open and normally closed contacts rated 2A at 30Vdc
Input monitoring: Inputs may be configured to monitor for open circuit, short circuit and active (fire) conditions
Dimensions: Height: 233 mm, Width: 70 mm, Depth: 13 mm
Operating temperature: -10°C to +55°C

Current consumption: 1.7mA with communication and LED blink enabled
Led current: 5mA @ 24Vdc (LED on) per module
Output relay: Each output consists of a form C (change over) relay contact providing both normally open and normally closed contacts rated 2A at 30Vdc
Input monitoring: Inputs may be configured to monitor for open circuit, short circuit and active (fire) conditions
Dimensions: Height: 233 mm, Width: 70 mm, Depth: 13 mm
Operating temperature: -10°C to +55°C
Relative humidity: 10% to 93%, non-condensing

Overview

What it is and how it fits the system.

The Morley MCX-55 is a 5-way input and 5-way output addressable interface module whose inputs and outputs are each individually addressed and controlled by the control equipment. Each output is a form-C changeover relay, while inputs can be configured to monitor for open and short-circuit conditions, giving a compact solution where multiple switching and monitoring points share a single location. Supplied as a PCB for installation into other equipment housings, drawing 1.7mA with communication and LED blink enabled.

Specifications

Full technical data for this part.

Current consumption	1.7mA with communication and LED blink enabled
Led current	5mA @ 24Vdc (LED on) per module
Output relay	Each output consists of a form C (change over) relay contact providing both normally open and normally closed contacts rated 2A at 30Vdc
Input monitoring	Inputs may be configured to monitor for open circuit, short circuit and active (fire) conditions
Dimensions	Height: 233 mm, Width: 70 mm, Depth: 13 mm
Operating temperature	-10°C to +55°C
Relative humidity	10% to 93%, non-condensing
Addressing	Each module card utilises up to 10 consecutive addresses with the base address being set by DIP switch, although any of the 10 addresses may be individually disabled allowing the use of this address by other modules on that loop
Loop address occupancy	Each module occupies a single Notifier Loop Module address with the first address being set by DIP switch
Construction	Supplied as a P.C.B. allowing installation in to other equipment housings such as control cabinets; 5 x 3.5mm mounting holes provide suitable secure mounting for the P.C.B's

Specifications sourced from manufacturer documentation.

Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know

Datasheets & documents

Reference downloads.

Datasheet (797-065)datasheet
2231 KB