Aspirating Smoke Detection
Xtralis F-PC-HE-2.5 ASD Sampling Clip 2.5mm Harsh Env
- Variant
- Harsh Environment
- Sampling hole size
- 2.5mm (6/64)
- Length
- 55 mm
- Width
- 30.5 mm
- Weight
- 11 g
- Tube outer diameter
- 25 mm - 27 mm
- Colour body
- RAL9005
Overview
What it is and how it fits the system.
The Xtralis F-PC-HE-2.5 is a Harsh Environment VESDA/FAAST sampling hole clip from the CLIP Hole Identification System, providing a colour-coded 2.5mm (6/64) sampling point for aspirating smoke detection pipe networks. Constructed in PC/ABS with a RAL9005 body, it locates on tube of 25mm to 27mm outer diameter. Measuring 55mm by 30.5mm and weighing 11g, it standardises sampling hole sizing across the pipe run.
Technical overview
F-PC-HE-2.5 is the Xtralis Harsh Environment sampling point clip that carries a 2.5mm (6/64) hole for aspirating smoke detection pipe networks, one of the colour-coded sizes making up the FAAST/VESDA Sampling Hole Identification System. In use, the clip fits over a 10mm drilled sampling hole in pipe of 25 mm to 27 mm outer diameter, placing the pre-engineered 2.5mm aperture over the larger drilled opening.
Colour coding is assigned accordingly to the IEC 60062 standard resistor code, which lets the hole size be read from the clip after installation. Construction pairs a PC/ABS body in RAL9005 with a variable-material TPE rubber section, and each clip is a single piece that clicks into place by hand.
The Harsh Environment format contributes a flexi-lip design at the sampling hole together with a chamfered hole entry that reduces dust loading effects, helping to increase uptime and potentially extending test intervals. Wiring does not apply to this fitting; physical detail is covered by the installation instructions, which should be followed for full functionality.
Specifications
Full technical data for this part.
| Order code | F-PC-HE-2.5 |
|---|---|
| Description | ASD SPL PT CLIP HE 2.5mm (6/64) |
| Variant | Harsh Environment |
| Sampling hole size | 2.5mm (6/64) |
| Length | 55 mm |
| Width | 30.5 mm |
| Weight | 11 g |
| Tube outer diameter | 25 mm - 27 mm |
| Colour body | RAL9005 |
| Material | PC/ABS |
| Colour rubber | Variable material TPE |
| Maximum pipe network pressure | 7 bar ( -30 °C +45 °C) |
| Application temperature range | -30 °C +45 °C* (Application where ambient temperature will exceed 45°C may lead to clip sealing leakage up to 5%) |
| Application humidity range | 5% to 95% Relative Humidity |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Datasheets & documents
Reference downloads.
- 149 KB
- 187 KB