System Sensor Low profile Optical Smoke Sensor, no Isolator - White. Requires B501AP base
| Part no. | 22051E-26 |
|---|---|
| Brand | System Sensor |
| Range | Addressable Detection |
| Sub-range | Detector |
Image for illustration; item supplied may differ
At a glance
- Low Profile Optical Sensor22051E-26 is an S200A low profile optical smoke sensor using photoelectric detection.
- New Detection ChamberThe sensor uses a completely new detection chamber design, the result of many years of research and development.
- Reduced Unwanted AlarmsThe chamber gives improved responsiveness, reduced sensitivity to changes caused by settling dust and reduced false alarms resulting from ingress of insect and other debris.
- Smoothing FiltersSophisticated processing circuitry incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms.
- Requires B501AP Base22051E-26 is a plug-in unit that requires a B501AP base.
- Supply and EnvironmentSupply is 15 to 32Vdc, with limits of -30°C to +70°C and 10 to 93% relative humidity (non-condensing).
- White PC/ABS HousingThe housing material is PC/ABS in white.
- Size and WeightThe sensor spans 102mm and stands 52mm high in a B501AP base, weighing 97g including that base.
Description
The 22051E-26 optical smoke sensor is a plug-in unit for the System Sensor Protocol, and a B501AP base is required before it can be installed. Its low profile housing is PC/ABS, finished in white.
Photoelectric detection takes place in a chamber of completely new design. Working supply for the sensor is 15 to 32Vdc; the temperature limits are -30°C to +70°C and 10 to 93% relative humidity (non-condensing) applies. With the base fitted, diameter is 102mm, installed height is 52mm and total weight is 97g.
Read the full technical description
22051E-26 is an S200A low profile optical smoke sensor in a white plug-in housing, and it requires a B501AP base. Detection is photoelectric and is built around a completely new detection chamber design, the result of many years of research and development.
That chamber brings improved responsiveness, reduced sensitivity to changes caused by settling dust and reduced false alarms resulting from ingress of insect and other debris. Sophisticated processing circuitry incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms.
Housing material is PC/ABS. Installed in a B501AP base the sensor spans 102mm, stands 52mm high and weighs 97g including that base. Supply is 15 to 32Vdc, with an operating temperature range of -30°C to +70°C and 10 to 93% relative humidity (non-condensing). The LED draws 3.5mA at 24Vdc. The sensor communicates on the System Sensor Protocol.
Specifications
| Operating voltage | Operating voltage range 35V - 41V |
|---|---|
| Operating temperature | -10 °C to 50 °C |
| Storage temperature | -20 °C to 70 °C |
| Relative humidity | (non condensing) up to 90% |
| Weight | 0.3Kg (approximate) |
| Ingress protection | IP55C IP31C |
| Enclosure material | Flame retardant ABS (Strobe cover is polycarbonate) The plastic enclosures meet the flammability requirements of ISO 1210:1992 Class FH-2. |
| Enclosure colour | White and Red (with red translucent lens cover for the Strobe) |
|---|---|
| Deep base depth | 40mm depth |
| Shallow base depth | 25mm depth |
| Base options | supplied with either a deep base (40mm) or a shallow base (25mm), offering IP55C and IP31C rating |
| Terminal size | Terminal size 2.5mm 2 maximum |
| Cable entry deep base | Cable entry 2 - Top 1 - Bottom 1 - Back |
| Cable entry shallow base | Cable entry 1- Back |
Specifications per manufacturer documentation, subject to change. E&OE.
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Datasheet (22051E-26, 22051EI-26) | Datasheet | 262 KB | Download PDF |