Nexceris Sensor Monitoring LT Gen 3
| Part no. | LT-SEN-M3 |
|---|---|
| Brand | Nexceris |
| Range | Gas Detection |
Image for illustration; item supplied may differ
Description
The LT-SEN-M3 is the Li-ion Tamer GEN 3 monitoring sensor, an off-gas detection node installed on battery racks downstream of convective airflows to detect electrolyte solvent vapour venting during early-stage lithium-ion battery failure. Calibration-free with a highly reliable output signal and self-diagnostic functionality, it detects a single cell failure and is compatible with all form factors and chemistries of lithium-ion battery. Its long product life is comparable to that of ESS battery systems. Supplied under Johnson Controls part number A163821J27.
LT-SEN-M3 is the Li-ion Tamer GEN 3 monitoring sensor, an off-gas detection node installed on battery racks downstream of convective airflows to catch electrolyte vapour venting in early-stage lithium-ion battery failure. Early detection of the venting phase allows mitigation measures to begin, and the sensor registers a single cell failure without any mechanical or electrical contact with the cells.
Read the full technical description
LT-SEN-M3 is the Li-ion Tamer GEN 3 monitoring sensor, an off-gas detection node installed on battery racks downstream of convective airflows to catch electrolyte vapour venting in early-stage lithium-ion battery failure. Early detection of the venting phase allows mitigation measures to begin, and the sensor registers a single cell failure without any mechanical or electrical contact with the cells.
The sensor runs without any calibration yet gives a reliable output signal, monitors its own health through self-diagnostic checks, and continues in service over a long working life comparable to that of ESS battery systems.
Within an installation, monitoring sensors network through hubs and switches to the control module, which centralises system management and provides relay and Modbus TCP/IP outputs to a BMS or other control systems; the LT-ACC-HUB-POE-HON PoE hub and LT-ACC-HUB-PWR-HON direct-power hub are the listed aggregation options. LT-SEN-R3 reference sensors work alongside, monitoring ambient conditions and air inlets to prevent false positives, and the LT-ACC-TST DEC bump test bottle verifies sensor operation. Physical connection and wiring details are given in the installation manual.
Specifications
| Xtralis part no | LT-SEN-M3 |
|---|---|
| Johnson controls part no | A163821J27 |
| Description | Sensor monitoring LT Gen 3 |
| Product family | Li-ion Tamer GEN 3 off-gas detection system for lithium-ion batteries |
| Function | Detects the escape of battery electrolyte vapour (venting phase) occurring in early stages of lithium-ion battery (LIB) failure; early detection allows mitigation measures |
| Calibration | Calibration-free product with highly reliable output signal; sensors require no calibration |
| Self diagnostics | Self-diagnostic functionality |
| Battery compatibility | Compatible with all form factors and chemistries of lithium-ion batteries |
| Detection capability | Detection of a single cell failure without mechanical or electrical contact with the cells |
| Product life | Long product life, comparable to that of ESS battery systems |
Specifications per manufacturer documentation, subject to change. E&OE.
Optional accessories
- LT-ACC-HUB-POE-HONHub PoE LT Gen 3compatible / works with: Hub PoE LT Gen 3£364.55ex VAT£437.46 inc VATIn stock
- LT-ACC-HUB-PWR-HONHub Direct Power LT Gen 3compatible / works with: Hub Direct Power LT Gen 3£270.25ex VAT£324.30 inc VATIn stock
- LT-SEN-MOSLi-Ion Tamer Multi Output SystemUsed by / houses: Li-ion Tamer Multi Output System£714.73ex VAT£857.68 inc VATIn stock
- LT-ACC-TSTDEC Bump Test BottleDEC Bump Test Bottle used to verify sensor operation£218.50ex VAT£262.20 inc VATIn stock
