Gas Detection
Li-ion Tamer LT-ACC-HUB-PWR-HON Direct Power Hub, GEN 3
- Ordering code
- LT-ACC-HUB-PWR-HON
- Operating Temperature
- -10 to 50°C (14 to 122°F) °C
- Humidity
- 10 to 90% RH (non-condensing) % RH
- Power Consumption (Fully Populated)
- 0.5 A (6.0 W @ 12 VDC)
You will also need
Needed to install, power or certify this product.
Hub DIN-Rail Mount Kit
Hub DIN-Rail Mount Kit named for mounting this hub
Overview
What it is and how it fits the system.
The LT-ACC-HUB-PWR-HON is the Direct Power Hub (Gen 3) for the Li-ion Tamer GEN 3 lithium-ion off-gas detection system. It networks sensing nodes to the controller using a direct power connection. Ordered under code LT-ACC-HUB-PWR-HON.
Technical overview
LT-ACC-HUB-PWR-HON is the Hub, Direct Power, Gen 3 of the Li-ion Tamer GEN 3 lithium-ion off-gas detection system: where the related LT-ACC-HUB-POE-HON is the PoE hub, this variant networks sensing nodes to the controller using a direct power connection.
Mounting is handled by LT-ACC-HUB-MKT, the hub DIN-rail mount kit listed as an ordering accessory for the hub, and two power supplies are recorded alongside the direct-power unit: the 12 VDC LT-ACC-PWR-12 and the 48 VDC LT-ACC-PWR-48.
Field placement puts each hub local to its zone of sensors, from which the sensing nodes route through hubs and switches up to LT-CTR-SML, the Gen 3 controller that aggregates sensor signals. The Gen 3 sensing devices listed with the hub are the LT-SEN-M3 monitoring sensor and the LT-SEN-R3 reference sensor, and physical connections are covered in the installation manual.
Specifications
Full technical data for this part.
| Ordering code | LT-ACC-HUB-PWR-HON |
|---|---|
| Description | Hub, Direct Power, Gen 3 |
| Operating Temperature | -10 to 50°C (14 to 122°F) °C |
| Humidity | 10 to 90% RH (non-condensing) % RH |
| Power Consumption (Fully Populated) | 0.5 A (6.0 W @ 12 VDC) |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Optional accessories
Optional additions — this product works without them.
Ctr LT Gen 3
LT-CTR-SML — Controller, Gen 3 (aggregates sensor signals)
Sensor Monitoring LT Gen 3
LT-SEN-M3 — Monitoring Sensor, Gen 3
Sensor Reference LT Gen 3
LT-SEN-R3 — Reference Sensor, Gen 3
Hub PoE LT Gen 3
compatible / works with: Hub PoE LT Gen 3
Datasheets & documents
Reference downloads.
- Datasheet (LT-ACC-HUB-PWR-HON)datasheet319 KB