Skip to content

Trade prices shown ex VAT. Order by 3pm for same-day dispatch on stocked lines, UK mainland. Free UK delivery on orders over £250 ex VAT.

Sales 01509 648840
FireAgent
Basket (0)

Gent, Morley-IAS and Xtralis stock added weekly. Open to the trade.

Gent Magnet Door Holder 24V DC 22mA

Part no.04390-31
BrandGent
RangeDoor Holders
04390-31 Magnet Door Holder 24V DC 22mA — wall plate with circular magnet and red gasket

Image for illustration; item supplied may differ

At a glance

  • Wall Mounted Door Holder04390-31 is the wall mounted 24V DC model in the Electromagnetic Door Holders range.
  • 24V DC OperationThe unit operates at 24V DC with a current consumption of 22mA.
  • 200N Holding ForceHolding force is 200N.
  • Fire Resistant ABS HousingThe finish is White Fire Resistant ABS and the unit weighs 360g.
  • Integral Release ButtonAn integral release button provides push button release and test.
  • Reverse Polarity ProtectionThe DC unit is fitted with a suppression diode and protection against reverse polarity such that it may be operated from a reverse polarity monitored circuit.
  • EN1155 ApprovalApproval is to EN1155:1997 (CPD Approved).
DescriptionSpecificationsOptional accessories

Description

04390-31 is the wall mounted 24V DC unit in the Electromagnetic Door Holders range that closes fire doors in an emergency and prevents the spread of fire and smoke. It takes 22mA in service and offers 200N of holding force.

The casing is White Fire Resistant ABS and the assembly weighs 360g. The unit is fitted with an integral release button, with push button release and test part of the arrangement.

04390-31 is a wall mounted 24V DC door holder from the Electromagnetic Door Holders range, working to close fire doors in an emergency and so prevent the spread of fire and smoke. Current consumption stands at 22mA, and the magnet develops a holding force of 200N.

The housing is finished in White Fire Resistant ABS and the door holder weighs 360g. An integral release button gives push button release and test at the device itself. An anti-residual magnetism feature is provided, and a spring loaded release pin is mounted centrally within the electromagnet.

Read the full technical description

This is a DC unit, polarised and suppressed, carrying a diode for suppression alongside reverse polarity protection so it can run from a reverse polarity monitored circuit. It holds EN1155:1997 (CPD Approved) approval.

04390-31 is a wall mounted 24V DC door holder from the Electromagnetic Door Holders range, working to close fire doors in an emergency and so prevent the spread of fire and smoke. Current consumption stands at 22mA, and the magnet develops a holding force of 200N.

The housing is finished in White Fire Resistant ABS and the door holder weighs 360g. An integral release button gives push button release and test at the device itself. An anti-residual magnetism feature is provided, and a spring loaded release pin is mounted centrally within the electromagnet.

This is the DC version, polarised and suppressed, fitted with a suppression diode and protection against reverse polarity so that it may be operated from a reverse polarity monitored circuit. Approval is held to EN1155:1997 (CPD Approved), and a floor mounting bracket is available.

Specifications

Order code description04390-31 Magnet Door Holder 24V DC 22mA
MountingWall mounted
Voltage24V DC
Current consumption22mA
Holding force200N
Manual releaseIntegral manual release button, allowing the door to be closed without operating the fire alarm
Supplied withDoor mounting keeper plate
Anti residual magnetismFitted with a spring loaded release pin mounted centrally within the electromagnet; on power off the release pin pushes the door away from the electromagnet, overcoming any residual magnetism
Dc protectionD.C. unit is fitted with a suppression diode and protection against reverse polarity such that it may be operated from a reverse polarity monitored circuit
HousingLow profile, flame retardant ABS housing
ApprovalsEN1155:1997 (CPD Approved)
ComplianceDesigned to comply with EN61000-3-2, EN50081-1, EN60950 and EN1155 (CPD Approved)

Specifications per manufacturer documentation, subject to change. E&OE.

Optional accessories