VESDA Standard-Clip for ASD pipework 5.0mm Pack of 5
| Part no. | F-PC-5 |
|---|---|
| Brand | VESDA |
| Range | Aspirating Smoke Detection |
| Sub-range | Sampling Clip |
Image for illustration; item supplied may differ
Description
The Xtralis F-PC-5 is an ASD (Aspirating Smoke Detection) sampling point hole CLIP, Standard variant, sized for a 5.0mm (13/64 inch) sampling hole and part of the FAAST/Honeywell CLIP Hole Identification System. Moulded in RAL9005 PC/ABS with a variable TPE rubber, it fits tube outer diameters of 25mm to 27mm. It measures 55 x 30.5mm and weighs 11g.
F-PC-5 fixes the sampling point hole size at 5.0mm (13/64 inch) in aspirating smoke detection (ASD) pipework, serving as an Xtralis Standard-variant clip within the FAAST Sampling Hole Identification System, also designated the Honeywell CLIP Hole Identification System.
Read the full technical description
F-PC-5 fixes the sampling point hole size at 5.0mm (13/64 inch) in aspirating smoke detection (ASD) pipework, serving as an Xtralis Standard-variant clip within the FAAST Sampling Hole Identification System, also designated the Honeywell CLIP Hole Identification System.
Colour coding within this system is assigned to the IEC 60062 standard resistor code. Preparation amounts to a 10mm (27/64") bit at every sampling point; the clip then locates with a click and holds a firm position without slipping, needing no part assembly or tools.
Suited to pipe or tube of 25 mm to 27 mm outer diameter, the clip is a single-piece design moulded in RAL9005 PC/ABS with a variable-material TPE rubber. Physical fitting detail is carried in the installation instructions, and the install manual is the reference for fitting.
Specifications
| Order code description | F-PC-5 ASD SPL PT CLIP STD 5.0mm (13/64 inch) |
|---|---|
| Variant | Standard Variant |
| Sampling hole size | 5.0mm (13/64 inch) |
| Length | 55 mm |
| Width | 30.5 mm |
| Weight | 11 g |
| Tube outer diameter | 25 mm - 27 mm |
| Colour body | RAL9005 |
|---|---|
| Material | PC/ABS |
| Colour rubber | Variable material TPE |
| Maximum pipe network pressure | 7 bar ( -30 °C +45 °C) |
| Application temperature range | -30 °C +45 °C* (* Application where ambient temperature will exceed 45°C may lead to clip sealing leakage up to 5%.) |
| Application humidity range | 5% to 95% Relative Humidity |
| Drill hole size | Create 10mm drill holes for all sampling points (use a 10mm (27/64") drill bit) |
Specifications per manufacturer documentation, subject to change. E&OE.
Documents
| Document | Type | Size | Download |
|---|---|---|---|
| Datasheet (F-PC-0, F-PC-2, F-PC-2.5, F-PC-3, F-PC-3.5 +16 more) | Datasheet | 149 KB | Download PDF |
| Datasheet (F-PC-2.5, F-PC-3.5, F-PC-4, F-PC-5, F-PC-5.5 +6 more) | Datasheet | 187 KB | Download PDF |