Gent Vigilon Main Control Card V3+ For 8 Line Display

Eight line display panels on the BS side are what this card serves. VIG-MCC-V3+ goes into a BS Vigilon/34000 4-loop panel with 8 line display, has been standard in those panels since June 2005, and pairs with an inner door of the same vintage bearing 12 LEDs on control indication facia and calling for software version 3.90 or greater. Zone LEDs function is not supported on BS fire panels.

Physical data runs 157mm height x 100mm width, 96g (approximate), 0 C to 45 C in operation and -10 C to 55 C in storage, humidity (non condensing) up to 90%, with a CR2032 3V lithium cell. Fitting is into the LCC slot P1 on the backplane, taking a 40-way ribbon cable from the DKC at P4.

VIG-MCC-V3+ is the Main Control Card for installation in a BS Vigilon/34000 4-loop panel with 8 line display, and it has been standard in all BS Vigilon/34000 panels supplied after June 2005. Its partner inner door is the one having 8 line display on a BS Vigilon panel, identified by MCC compatibility notices and 12 LEDs on control indication facia, and those doors call for software version 3.90 or greater.

A BS Vigilon/34000 panel carrying this Main Control Card along with the latest Loop Processor Card is compatible with S-Quad range of sensors. The Zone LEDs function is not supported on BS fire panels.

The card is 157mm high and 100mm wide at 96g (approximate), rated 0 C to 45 C operating and -10 C to 55 C in storage, with relative humidity (non condensing) up to 90%. Its lithium cell is a CR2032 3V cell and replacement should be with the same or equivalent type. The MCC must be fitted into the LCC slot P1 on the backplane, the DKC connects to P4 by a 40-way ribbon cable, and P2 and the USB port are marked for future use.