WSS-PR-I00 Addressable Wall Sounder VID with Isolator
Images are representative and may not show the exact item supplied; product and specifications subject to change — E&OE. Spotted an issue? Let us know.
- Brand
- System Sensor
- Manufacturer part number
- WSS-PR-I00
- Datasheet
- On request — ask our team
- EN 54 part / class
- —
- Load factor per device
- —
- Max quantity per loop
- —
Overview
What it is and how it fits the system.
This is the wall sounder VID variant with a built in isolator: a loop powered, wall mounted sounder whose RED lens carries a visual indicating device alongside the audible output.
The visual side has a firm limit. This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire. As a sounder it is EN54-3, and LPCB approval applies.
Tone choice runs to 32 built-in tones, addressing is by rotary decade address switches, and anti-tamper provision is included. The body runs to 121mm diameter and 64mm height at 238g, rated -25°C to +70°C at 95% relative humidity maximum, non-condensing, with low power requirements and an optional IP65 rating.
Key features
- Wall Sounder VID — WSS-PR-I00 is an addressable wall mounted sounder VID with isolator.
- Not An EN54-23 VAD — This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire.
- RED Lens — The visual indicating device sits behind a RED lens.
- Built In Isolator — The unit has a built in isolator.
- EN54-3 And LPCB — Its sounder approval is to EN54-3, and it also carries LPCB approval.
- 32 Built-in Tones — The sounder gives 32 built-in tones.
- Rotary Decade Address Switches — It takes its address on rotary decade address switches.
- Body And Environment — It weighs 238g in a body 64mm high and 121mm in diameter, working from -25°C to +70°C.
Technical overview
WSS-PR-I00 is an addressable wall mounted sounder VID with isolator — a wall mounted, loop powered sounder that also works as a visual indicating device (VID), with a RED lens and a built in isolator.
This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire. Its sounder approval is to EN54-3, and the product also carries LPCB approval.
The sounder gives 32 built-in tones and takes its address on rotary decade address switches. It weighs 238g in a body 64mm high and 121mm in diameter, and it works from -25°C to +70°C at up to a maximum 95% relative humidity, non-condensing. Anti-tamper provision is built in, IP65 is available as an option, and power requirements are low.
Specifications
Full technical data for this part.
Electrical
| Operating voltage | 24 VDC nominal (18-32 VDC) - Regulated. |
|---|---|
| Power consumption | 1.8 watts (nominal); 2.4 watts (Alarm); 12 Watts (max) = 0.50A @ 24V with heater ON 100% duty cycle. |
| Inrush current | Inrush Current is 0.75A for a maximum duration of less than 5ms. |
Communications & wiring
| Outputs | Fault, Alarm and Auxiliary SPDT relays Max. 32 Vdc/ac, max. 2 A, min 10 mA at 12 V resistive load. 4-20 mA source, sink or isolated current output. Uncertainty is 1% of reading. FP2 over RS-485 and USB (USB is accessible through Detector Module electronic device only). Modbus over RS-485. |
|---|---|
| Communication protocols | FP2 over RS-485 and USB; Modbus over RS-485; HART® 7 |
Physical
| Weight | Aluminum 3 lbs. 11 oz. (1.7 kg); Stainless Steel 7 lbs. 7 oz. (3.4 kg) |
|---|---|
| Housing material | Low Copper (less than 0.25%) marine grade Painted casted Aluminum of ASTM A356.0 grade. Polished cast Stainless Steel of ASTM CF8M grade. |
| Material options | available in either 316 Stainless Steel or Painted [Aluminum] |
| Enclosure | Diameter: 125 mm (4.92 in) x 115 mm (4.52 in) deep; Two M25 X 1.5P or two ¾'' NPT conduit entries. |
| Window size diameter | 79 mm (3.11 in) |
Other specifications
| Sensor technology | 3IR sensor technology |
|---|---|
| 4-20ma output | 4-20 mA source, sink or isolated current output. Uncertainty is 1% of reading. |
| Hart | The FS24X Plus™ Flame detector has HART® 7 communication; registered with FieldComm Group. EDD and DTM files are available. |
| Operating temperature atex iecex | -55°C to +75°C |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Optional accessories
Optional additions — this product works without them.
Flame FS20X/24X Swivel Mount SS.
Compatible with SM4 mounting bracket which has 10 degree increments of adjustment in horiz
Spares & replacement parts
Replacement parts for units already in service.
Flame FS20X/24X Sunshield
Available Accessories/Spares: SM4 Mounting Bracket, SM4-M Marine Mounting Bracket, Tank Mo