Gas Detection XCL
VESDA Sensepoint XCL XCL-VEA-CO2PP-RM CO2 Modbus Detector
- Output interface
- Modbus Relay (Modbus RTU)
- Supply voltage
- 24 VDC nominal; 9 to 32V DC (Modbus); 24V AC 50/60Hz Nominal (20 to 27 VAC)
- Max power consumption 24v dc
- 0.7 W (Modbus) (toxic), 1.2W (flammable and CO2); Relay Version: additional 0.6W total
- Maximum inrush current
- (24V DC) 850 mA
- Output
- Analog Output: 0 to 22 mA; Digital Output: Modbus RTU; Relay Output: 2 relays (24 V DC / 250 V AC, 5 A)
- Ingress protection
- IP65, Type 4 (NEMA 250)
- Operating temperature
- −20 to +50 °C (−4 to +122 °F)
Overview
What it is and how it fits the system.
The XCL-VEA-CO2PP-RM is a VESDA Sensepoint XCL aspirated carbon dioxide (CO2) gas detector that inserts in-line into a VESDA-E VEA micro bore tube network, with a 5000ppm range. It offers Modbus RTU output plus relays, operates from -20 to +50°C and is housed in an IP65-rated 113 x 113 x 59 mm polycarbonate enclosure.
Technical overview
XCL-VEA-CO2PP-RM is an Xtralis VESDA Sensepoint XCL aspirated gas detector that reports carbon dioxide over Modbus RTU from within a VESDA-E VEA microbore tube network, pairing a 5000 ppm CO2 sensor with relay signalling.
Digital communication suits sites running VSC or VSM4 for remote detector access, while configurable relays give hard-wired paths into PLCs, HVAC, building management systems and fire alarm control panels. Set-up and adjustment take place over Bluetooth from an iOS or Android device up to 10 m away, mobile device dependent, and integral LEDs indicate alarm status at the housing.
Installation follows the in-line pattern, the detector joining new or existing VESDA-E VEA systems through flexible tube connections to the 6 mm micro bore tubing. The XCL-SC-CO2PP cartridge is the matching replacement sensor, XCL-VEA-TUB covers the tubing interface, and XCL-FILTER, XCL-M20-CG and XCL-COVER address filters, cable glands and the sensor cover respectively. Radio approvals list RED, FCC, BT SIG, EMC compliance cites CE - EMC and EN 50270, and physical and terminal wiring appears in the installation manual.
Specifications
Full technical data for this part.
| Output interface | Modbus Relay (Modbus RTU) |
|---|---|
| Supply voltage | 24 VDC nominal; 9 to 32V DC (Modbus); 24V AC 50/60Hz Nominal (20 to 27 VAC) |
| Max power consumption 24v dc | 0.7 W (Modbus) (toxic), 1.2W (flammable and CO2); Relay Version: additional 0.6W total |
| Maximum inrush current | (24V DC) 850 mA |
| Output | Analog Output: 0 to 22 mA; Digital Output: Modbus RTU; Relay Output: 2 relays (24 V DC / 250 V AC, 5 A) |
| Dimensions | 113 x 113 x 59 mm (4.4 x 4.4 x 2.3 in) (WxHxD) |
| Weight | 500 g (1.1 lb) |
| Ingress protection | IP65, Type 4 (NEMA 250) |
| Casing material | Polycarbonate (charcoal colour) |
| Operating temperature | −20 to +50 °C (−4 to +122 °F) |
| Storage temperature | 0 to +30 °C (+32 to +86 °F) |
| Humidity | 0 to 99% (non-condensing) |
| Atmospheric pressure | 95 to 110 kPa |
| Wire terminal size | Pluggable rising clamp style. 0.5 to 1.5 mm2, 20 to 16 AWG. |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Spares & replacement parts
Replacement parts for units already in service.
VESDA RPL SENS CO2 5000PPM SP XCL
Replacement CO2 5000ppm sensor cartridge for the XCL CO2 5000ppm detector.