Beam Detection OSID Range
Xtralis OSE-HPW High Power Wired OSID Emitter
- Ordering code / part number (catalogue block)
- FG-02-034 OSE-HPW OSID Emitter High Power/Wired Version
- Product type (catalogue table cell, field key fg-02-034)
- OSE-HPW OSID Emitter High Power/Wired Version
- Emitter class / power / wiring (crib part-number sheet, pass-sealed)
- OSE-HPW Emitter High Power Wired 24 Vdc
- Supply voltage (from the crib part-number line; pass-sealed)
- 24 Vdc
Overview
What it is and how it fits the system.
The Xtralis OSE-HPW is the High Power, Wired version of the OSID Emitter, the transmitting unit that an OSID Imager receives across an open area. Powered at 24 Vdc and supplied under ordering code FG-02-034, it sits within the OSID Emitter family for projected-beam smoke detection.
Technical overview
OSE-HPW is the wired, high-power emitter in the Xtralis OSID Open-area Smoke Imaging Detection projected-beam system. Running from a wired 24 Vdc supply, this emitter works with an OSID imager, and its high-power rating enables double the detection range reached on the OSI-90.
Working with the OSI-90 imager, which has an 80° field of view, OSE-HPW is rated for open spans of 12 to 68 metres, and a single OSI-90 can operate with up to seven emitters. That extended reach suits large open areas served by a wired power feed.
OSE-HPW is compatible with the OSID-EHE environmental housing, which shields the emitter from dust and water ingress, and with the OSID-WG wire guard for protection against impact. The OSE-ACF anti-condensation film keeps the emitter lens clear of condensation, and physical connection details are set out in the installation manual.
Specifications
Full technical data for this part.
| Ordering code / part number (catalogue block) | FG-02-034 OSE-HPW OSID Emitter High Power/Wired Version |
|---|---|
| Product type (catalogue table cell, field key fg-02-034) | OSE-HPW OSID Emitter High Power/Wired Version |
| Emitter class / power / wiring (crib part-number sheet, pass-sealed) | OSE-HPW Emitter High Power Wired 24 Vdc |
| Supply voltage (from the crib part-number line; pass-sealed) | 24 Vdc |
Specifications sourced from manufacturer documentation.
Specifications per manufacturer documentation, subject to change — E&OE. Spotted an inaccuracy? Let us know
Optional accessories
Optional additions — this product works without them.
Imager - 80º coverage-Imager with an 80° field of view providing distances 6m to 68m. Distances: 6-34m with OSE-SP-01 / OSE-SPW, 12-68m with OSE-HPW, 12-50m with OSE-HP-01. OSI-90 can operate with up to 7 Emitters.
OSI-90 OSID Imager (80 degree FOV) working WITH OSE-HPW: the OSID crib sheet states 'OSI-9
Imager - 7º coverage
OSI-10 OSID Imager co-listed WITH OSE-HPW in a second crib sheet: 'OSI-10 Imager - 7 deg c
Emitter - Alkaline Battery
Emitter - Standard Power, Wired
Emitter - High Power, Alkaline Battery
OSID Emitter family siblings (same page-49 catalogue OSID-Emitters section, same_diagram_c
Emitter environmental housing IP66
OSID-EHE Emitter Environmental Housing / FG-01-086 - Emitter accessory co-listed in the sa
Anti-condensation film for Emitters. An easy applicable film that provides condensation resistance for the lenses of OSID Emitters.
OSE-ACF Anti-Condensation film to suit OSID-EHE (10pk) / FG-01-088 - Emitter accessory co-
Wire Guard. Steel cage to protect OSID Imagers and Emitters from damage.
OSID-WG Wire Cage / FG-01-087 - OSID accessory co-listed in the same sealed section
OSID Installation Kit. Kit including: Laser Alignment Tool, Test Filter, PC Cable, Cleaning Cloth, Reflectors and Manual.
Installation kit with laser alignment tool used to align the Emitter.