Catalogue
Full catalogue
Every product we stock, listed by brand — 1139 live SKUs. Trade-only, EN54-compliant.
Ancillaries (10)
- HLSPS25 — 24VDC 2.5amp EN54-4 Power Supply
- HLSPS50 — 24VDC 5amp EN54-4 Power Supply
- 04390-92 — Door Holder Floor Plate
- 04390-99 — Door Plate Assembly (Spare)
- HLS-DOCBOX — Lockable Enclosure for Storage of Site Documentation
- 04390-55 — Magnet Door Holder 240V AC 17.5mA
- 04390-31 — Magnet Door Holder 24V DC 22mA
- 04390-41 — Magnet Door Holder Floor Mounted 24V DC 45mA
- HLS-PSU-TR20 — Transformer Rectifier 24VDC 2.0A
- HLS-PSU-TR40 — Transformer Rectifier 24VDC 4.0A
Batteries (23)
- 581730 — 12 V 105 Ah battery for VA/PA emergency PSU (must be used in pairs)
- 581731 — 12 V 150 Ah battery for VA/PA emergency PSU (must be used in pairs)
- 581732 — 12 V 65 Ah battery for VA/PA emergency PSU (must be used in pairs)
- 4015-517-YFR — Power Sonic Battery 1.2Ah - 12V Flame Retardant
- 4015-514-YFR — Power Sonic Battery 12Ah - 12V Flame Retardant Used in Vigilon Compact, Sentri2 & S4-34440-12 MPI
- 4015-604-YFR — Power Sonic Battery 14Ah - 12V Flame Retardant Used in S4-34440-ASD FAAST Interface
- 4015-504-YFR — Power Sonic Battery 17Ah - 12V Flame Retardant
- 4015-502-YFR — Power Sonic Battery 2.3Ah - 12V Flame Retardant Used in Xenex 2&4 Zone panels, FP595 2&4 zone, S4-34440-02 & 78302-02NM MPI's
- 4015-602-YFR — Power Sonic Battery 21Ah - 12V Flame Retardant Used in Vigilon & Sentri4 panels
- 4015-509-YFR — Power Sonic Battery 3.4Ah - 12V Flame Retardant Used in Xenex 8 zone & FP595 8 zone panels
- 4015-501-YFR — Power Sonic Battery 7Ah - 12V Flame Retardant Used in VIG & Sentri Repeat, Nano & Sentri1 panels
- 4015-603-YFR — Power Sonic Battery 7Ah - 6V Flame Retardant Used in Vigilon and Sentri zonal mimics
- 581730.PS — POWERSONIC PGFT-12V105-FR BATTERY
- 581731.PS — POWERSONIC PGFT-12V160-FR BATTERY
- 581732.PS — POWERSONIC PS-12650 - FR BATTERY
- NP1.2-12 — YUASA NP Battery 1.2 AH-12V Flame Retardant
- NP12-12 — YUASA NP Battery 12 AH-12V Flame Retardant (Used in ZXSe panels)
- NP17-12 — YUASA NP Battery 17 AH-12V Flame Retardant (Used in DXc & ZXSe Panels)
- NP2.8-12 — YUASA NP Battery 2.8 AH-12V Flame Retardant (Used in Morley Horizon Panels)
- NP24-12 — YUASA NP Battery 24 AH-12V Flame Retardant
- NP38-12 — YUASA NP Battery 38 AH-12V Flame Retardant
- NP65-12 — YUASA NP Battery 65 AH-12V Flame Retardant
- NP7-12 — YUASA NP Battery 7 AH-12V Flame Retardant (Used in Horizon, DXc & ZXSe Panels)
BS8629 Evacuation Alert System (4)
- EACIE1 — Evac Smart EACIE 1 BS8629 Panel (12 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE2 — Evac Smart EACIE 2 BS8629 Panel (24 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE3 — Evac Smart EACIE 3 BS8629 Panel (36 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
- EACIE4 — Evac Smart EACIE 4 BS8629 Panel (48 Zone) Loop based, requires FACP, excluding Gerda box. Includes Battery
Conventional (117)
- 13270-02LB — 2 Zone conventional panel, EN54 less batteries
- 19107-52 — 24Vdc DPCO Relay c/w High Profile Enclosure
- 020-772 — 4-way sounder output module (1.5A Max)
- KFB6 — 6"Fire Bell, 24Vdc, 15mA, 94dBA @ 1m
- 13271-08LB — 8 Zone repeat indicator, less batteries
- 020-747 — 8-way input / output card. Provides up to 8 configurable relay outputs or up to 4 command inputs and 4 outputs
- 020-417 — Active end of line monitor module
- OSE-ACF — Anti-condensation film for Emitters. An easy applicable film that provides condensation resistance for the lenses of OSID Emitters.
- OSEH-ACF — Anti-condensation film for OSID-EHE and OSID-EHI environmental housings. An easy applicable film that provides condensation resistance for the lenses of OSID Environmental Housings
- RTS151KEY — BEAM IMAGER RESET FLUSH MT
- 74431-66NM — Bell 12V Grey
- 74333-50NM — Bell 240V Grey weather resistant
- 74430-88NM — Bell 24V Red
- 74432-88NM — BELL 24V Red weather resistant
- PS031W — BOX MCP SURFACE MOUNT RED 1 TERMINAL
- PS200 — Call point cover.
- MUS158 — Call point glass (Old PN: KG1X50) Pack of 10
- 020-743 — Capacitor kit for detectors not compatible with capacitive EOL monitoring. Includes 8 x 10µƒ capacitors. Active EOL's required - See part number 020-417
- DBS1224B4W — Ceiling mounting base sounder, four tone (white), no cover. If required the SC085 (white lid) to be ordered separately
- OSI-RE-SS — Conventional Reflective Beam. Uses the same accessories as the 6500 conventional beams. Please see conventional section to find these accessories
- PS189 — Deep base Gasket accessory can be installed between the base and the mounting surface to provide the appropriate seal. Pack of 5
- PS188 — Deep Base O-Ring (Can be added to the conventional AV base to make it IP65 rated)
- 2020DBSD — DEEP BASE SCHOT DIODE VISION S
- 805590-D — Detector Base With Diode
- 805590 — Detector Base. Can be used for ES Conventional and Intrinsically safe detection.
- 2020BSD — Detector mounting base fitted with schottky diode. For Vision detectors
- D2E — Duct detector housing complete with B401 base for Non-Addressable detectors. (Detector not supplied). Requires DSTXX duct sampling tube and sensor.
- SC076 — Earth strap. Pack of 5
- OSE-SP-01 — Emitter - Alkaline Battery
- OSE-HP-01 — Emitter - High Power, Alkaline Battery
- OSE-HPW — Emitter - High Power, Wired
- OSE-SPW — Emitter - Standard Power, Wired
- OSID-EHE — Emitter environmental housing IP66
- 020-713 — Fire & fault relay module for NFS2-8
- XEN-FFR — Fire Fault Relay Unit
- 800171 — Fixed Heat Detector
- 800177 — Fixed Heat Detector Class B
- 2020F — Fixed temperature thermal A2S (58°C) conventional detector
- M1A-R470FG-G017-01 — Flush MCP 470 Ohms, Glass (supplied without back box)
- 13270-29 — Flush Plate for 1-8 Panel and Repeat Panel Variants
- OSP-001 — FTDI Cable 1.5m. 1.5m cable for connecting a PC to the Imager for use with OSID Diagnostic software. Cable may be extended by a further 20m when using an active USB amplifier.
- 13270-04LB — Gent 4 Zone conventional panel, EN54 less batteries
- 13270-08LB — Gent 8 Zone conventional panel, EN54 less batteries
- BEAMHKR — Heater kit for beam reflector. Requires 24V supply
- BEAMHK — Heater kit for reflective beam detector. Requires 24V supply
- 2020HF — High fixed temperature thermal BS (78°C) conventional detector
- 19100-02 — High Profile Enclosure with DIN rail 125x125x100mm.
- 002-492-222 — HRZ-2e, 2 zone Non-Addressable fire alarm control panel. 2 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W xD)
- 002-492-242 — HRZ-4e, 4 zone Non-Addressable fire alarm control panel. 4 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W x D)
- 002-492-282 — HRZ-8e, 8 zone Non-Addressable fire alarm control panel. 8 detection zones, 2 sounder outputs, surface mounting, fire and fault relays. 318 x 356 x 92mm (H x W x D)
- OSI-10 — Imager - 7º coverage
- OSI-90 — Imager - 80º coverage-Imager with an 80° field of view providing distances 6m to 68m. Distances: 6-34m with OSE-SP-01 / OSE-SPW, 12-68m with OSE-HPW, 12-50m with OSE-HP-01. OSI-90 can operate with up to 7 Emitters.
- OSID-EHI — Imager environmental housing IP66
- K20SWS-11 — Indoor key switch white, key removable in both positions, single pole
- K21SRS-01 — Key Operated MCP (Supplied without back box) N/O contact
- OSP-002 — Laser Alignment tool. A simple and effective tool for fast alignment of OSID devices. Aligns and locks the eyeball. Also activates Emitters when locked.
- 6500-LRK — Long range reflector kit for 70-100m
- 2351E A — Low profile Non-Addressable optical smoke detector compatible with the D2E duct detector.
- M1A-R470SF-G017-01 — MCP1A-RED-470-SURFACE-BC136R-FE1140-F222
- DST1 — Metal sampling tube duct width up to 0.3m (Not compatible with DH400E and DH400ACDC-E)
- DST1.5 — Metal sampling tube duct widths 0.3 to 0.6m (Not compatible with DH400E and DH400ACDC-E)
- DST3 — Metal sampling tube duct widths 0.6 to 1.2m (Not compatible with DH400E and DH400ACDC-E)
- DST5 — Metal sampling tube duct widths 1.2 to 2.4m (Not compatible with DH400E and DH400ACDC-E)
- DST10 — Metal sampling tube duct widths 2.4 to 3.7m (Not compatible with DH400E and DH400ACDC-E)
- 6500-MMK — Multi Mount Kit for IR reflective beam. Provides ceiling and wall mount swivel brackets. Note: Requires 6500-SMK
- 2020P — Optical conventional detector
- 800371 — Optical Smoke Detector
- 2020PT — Optical thermal multi criteria conventional detector
- OSP-003 — OSID FILTER ACRYLIC TEST PK10
- OSP-003-200 — OSID FILTER ACRYLIC TEST PK200
- RTS151KIT — OSID IMAGER RESET STATION SURF MT
- OSID-INST — OSID Installation Kit. Kit including: Laser Alignment Tool, Test Filter, PC Cable, Cleaning Cloth, Reflectors and Manual.
- OSI-RWG — OSID-R BEAM WIRE GUARD
- SC070 — Pack of test keys (pack of 10)
- 800271 — Rate of Rise Heat Detector
- 2020R — Rate of rise thermal A1R (58°C) conventional detector
- CWR — Red Deep IP65 base, provides cable access for indoor surface & applications up to IP65, suitable for use with all commonly encountered fire cable sizes & ranges. Pack of 5
- CSR — Red low profile base, provides multiple cable entry points and a range of fixing centres, suitable for use with all commonly encountered fire cable sizes & ranges. Pack of 5
- 19104-52 — Relay 24V DC Base & Diode
- ECO1000RTU A — Remote LASER tester for Vision detectors
- RI/W/3V — Remote LED (flush mounting). Requires a single gang backbox for mounting
- 781814 — Remote LED for ES Detect
- XENS-FLAP — Replacement Mouldings and Cover Plates
- PS230 — Resettable element for Conventional MCP (pack of 10)
- WM2348E — Single terminal back box for mounting RTS151KEY
- CWSO-RR-S1 — Sounder Red & Low Profile Base
- CWSO-RR-W1 — Sounder Red IP65 & Deep Base
- CWSS-RR-S5 — Sounder VAD-Red Base- Red Flash
- CWSS-RR-W5 — Sounder VAD-Red Base- Red Flash & IP65 Base
- CWSS-RW-S5 — Sounder VAD-Red Base- White Flash
- CWSS-RW-W5 — Sounder VAD-Red Base- White Flash & IP65 Base
- CWSS-WW-S5 — Sounder VAD-White Base- White Flash
- CWSO-WW-S1 — Sounder White & Low Profile Base
- OSE-RBA — Spare alkaline battery pack for Emitter units. Replacement Alkaline Battery pack for Emitters.
- MUS156 — Spare Glasses Conventional MCP (Pack of 10)
- 020-745-008 — Spare installation kit. Includes 8 capacitive end of lines, battery leads, Allen key, panel controls key and sounder end of line resistors
- 020-865 — Spare red controls key - Pack of 10
- XENS-SPARE — Spares pack for Xenex Panels
- 2020B — Standard detector mounting base for Vision detectors
- M1A-R470SG-STCK-01 — Surface call point with 470 Ohm resistor and N.O. contact. Complete with glass. (Old PN: MCP1A-R470SG-01)
- RI/W/BB — Surface Mount Base for RI/W/3V Remote LED indicator
- 6500-SMK — Surface Mount Kit for IR reflective beam detector. Allows direct surface cable entry
- W1A-R470SG-STCK-01 — Surface outdoor call point with 470 Ohm resistor and N.O. contact. Complete with glass. (Old PN: WCP1A-R470SG-01)
- OSP-004 — TEST FILTER 10 PK FOR OSID-R
- 19106-02 — Timer Octal Base 2-32 Secs. DOE 24V DC C/W Base
- CWST-RR-S5 — VAD-Red Base- Red Flash
- CWST-RR-W5 — VAD-Red Base- Red Flash & IP65 Base
- CWST-RW-S5 — VAD-Red Base- White Flash
- CWST-RW-W5 — VAD-Red Base- White Flash & IP65 Base
- REL/T/245 — Wall-Mounted Addressable Wireless Sounder VAD - Red/Red. Powered by 4x CR123A 3V batteries
- K20SRS-11 — Wall-Mounted Addressable Wireless Sounder VAD - White/Red. Powered by 4x CR123A 3V batteries
- W1A-R470SF-G017-01 — Weatherproof MCP 470 Ohms, Glass (supplied with back box)
- CWSS-WW-W5 — White body with cool white flash, IP65 deep base, EN54-Pt.3 and Pt.23 W-2.4-8.9 and C-3-10 / C-6-10 class approved sounder strobe with clear lens, provides omni directional wall and ceiling mounting, comes with soft start feature as standard and suitable for 12 and 24V systems. Deep base included
- SC085 — White cover plate for DBS1224B4W ceiling mounting sounder. Pack of 10
- CWW — White Deep IP65 Base Pack of 5
- OSID-WG — Wire Guard. Steel cage to protect OSID Imagers and Emitters from damage.
- M1A-Y470SF-K013-11 — Yellow conventional KAC manual Call point
Flame Detection (20)
- FSL100-TLBT — Flame 12V DC Battery for FSL test lamp
- FSL100-TLCH — Flame Charger kit for FSL test lamp
- PSU-12 — Flame Charger kit for TL test lamp
- FS20X-211-10-6 — Flame Electronics Module for FS20X Detector
- SH-001 — Flame FS20X/24X Sunshield
- SM4 — Flame FS20X/24X Swivel Mount SS.
- TL-2055 — Flame FS20X/24X Test lamp Hazardous Area
- TL-1055 — Flame FS20X/24X Test lamp Safe Area
- FSL100-SM21 — Flame FSL100 Swivel Mount
- FSL100-TL — Flame FSL100 Test Lamp
- FSX-A001 — Flame FSX Diagnostic Kit c/w Interface Module, RS485/USB Cable, PSU, Win PC Software
- FSL100-TLBU — Flame H3 Bulb for FSL test lamp
- FSX-A006 — Flame IR Bulb for TL Test Lamps
- FS20X-211-23-6 — Flame IR2/UV 60m Zone 1 Red Aluminium
- FS20X-211-24-6 — Flame IR2/UV 60m Zone 1 Stainless Steel
- FSL100-IR3 — Flame IR3 35m Zone 2/22 Red
- FSL100-UV — Flame UV 25m Zone 2/22 Red
- FSL100-UVIR — Flame UV/IR 25m Zone 2/22 Red
- FS24XP-AMGXX — FS24X Triple IR flame detector Aluminium (Red) M25
- FS24XP-SMGXX — FS24X Triple IR flame detector Stainless Steel M25
Gent by Honeywell (235)
- VIGPLUS-24 — 1 to 4 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in Black.
- VIGPLUS-24-NP — 1 to 4 Loop Vigilon Plus Control Panel without printer c/w 1 loop card & supplied in black.
- VIGPLUS-72 — 1 to 6 Loop Vigilon Plus Control Panel c/w 1 loop card & supplied in black.
- VIGPLUS-72-NP — 1 to 6 Loop Vigilon Plus Control Panel without printer c/w 1 loop card & supplied in black.
- S4-34760-15 — 1.5m Venturi Tube
- S4-34412 — 12 input Interface module (supervisory inputs only)
- 2211-150 — 16 line display
- 2211-155 — 16 line display (no zonal indicators)
- S4-34760-28 — 2.8m Venturi Tube
- S4-700-34K — 34000 S-Quad Adapter Base
- S4-34741-01 — 34740 Angle Bracket + Base
- S4-34741-03 — 34740 Parallel Bracket + Base
- S4-34450 — 4 Channel Interface (input/output) (no enclosure)
- 2211-152 — 8 Line Display (current)
- 2211-143 — 8 Line LCD (Current Display) since March 2005
- 2211-144 — 8 Line LCD (Current Display) since March 2005
- 2211-180 — 8 Line zonal display (current) since 2003
- VIG-MIM-A3 — A3 Zonal and Graphic Mimic BS & EN compatible supplied in grey.
- COMPACT-LPC-EN — Additional Loop card (2km) for COMPACT-24-N
- COMPACT-LPC — Additional Loop card for COMPACT-24-N. Supports 3400, 34000 & Pre-VAD Squad devices.
- ALD-302 — Anti ligature base for the S Quad Sensor (Requires S4-700 base)
- S4-34896 — Anti-Tamper Enclosure for MCP (IP66)
- VS-PSU-RPL — Backwards compatible PSU for old style Vigilon Panels
- S2IP-SN-R3 — Backwards compatible sounder (RED) - Replacement for 34203 3way Sounder
- S2IP-SN-W3 — Backwards compatible sounder (WHITE) - Replacement for 34203 3way Sounder
- VIG-BNG — BACnet Gateway Assembly for Vigilon & Compact
- VIG-BNG-RW — BACnet Gateway Assembly for Vigilon & Compact with Controls & Command Builds
- VIG-BNG-DINKIT — BACnet Gateway Din Rail Mounting Kit for Mains powered interfaces S4-344402/12
- S4-700 — Base - Common for all S-Quad Sensors
- VS-BATTBOX — Battery Box for Vigilon Panel (excludes batteries)
- VS-BATTBOX-72 — Battery Box for VIGPLUS-72 & VIGPLUS-72-NP.
- VS-FILTER-72 — Battery Filter PCBa/Cable For VIGPLUS-72
- VS-BATT-CABLE — Battery Lead Pack For VIGPLUS-72
- S4-34740 — Beam Sensor Pair (Transmitter and Receiver) excl bracket and Base
- S4-34742 — Beam Sensor Receiver
- S4-34741 — Beam Sensor Transmitter
- CustomMessage — Bespoke Messages Male only or Female only (Contact us)
- S4BK-700 — Black Base - Common for all S-Quad Sensors
- S4BK-705 — Black IP21 base covers (pack 5)
- 2211-130 — BS Loop -Vigilon V3+ and 3400
- 2211-140 — BS Network Vigilon V3+ and 3400
- 77821-01NM — Commissioning Lead For Vigilon Panel
- VCS-ODOOR-PLUS — Compact Plus Outer Door Assembly (supplied in Black)
- COMPACT-NODE — Compact Plus Terminal Node for Vigilon networks supplied in black.
- S4-34494 — Connection convertor for S4-34412 and S4-34600 (26 core ribbon to Terminal block)
- COMPACT-FLUSH — Control Panel Flush Surround (supplied in Black)
- VIG-BSKIT-NODE — Conversion Kit For VIG-NODE-24 EN 54 to BS V3+ Functionality
- VIG-BSKIT — Conversion Kit for VIG1-24 EN 54 to BS / V3+ functionality
- S4-34760 — Duct Housing (Inc S Quad BASE AND 0.6M TUBE)
- 805589ST — Dust cover to support S4, S4T and S4M device mouldings.
- 2211-129 — EN 54 Loop Vigilon EN and Compact
- 2211-139 — EN 54 Network - Vigilon EN and Compact
- 2250-025 — Epsilon
- VIG-NC-FO — Fibre Optic Network Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54 & V3+)
- NANO-FLUSH — Flush Mounting Bezel for Nano-24
- VIG-24-FLUSH — Flush Surround (Main Control Panel and Terminal Node)
- S4-34404 — Four channel Mains switching interface (c/w enclosure)
- S3-GASKET-IP55 — Gasket kit for S3 deep base - increases particle ingress from IP21 to IP55 (Pack of 10)
- PRINTER-HAND — Hand Held Printer - Thermal Type 58mm
- S3-CONTROL — HandiLink IR Remote Control for the S-Cubed Range of Sounders
- 2211-187 — HIGH POWERED EN54 LOOP VIG EN AND COM
- VIG-IOC-V3+ — Input/Output Card for Vigilon V3+
- VIG-IOC-DOM — Input/Output Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- S4-34496 — Interface enclose Plastic houses 6 interfaces
- S4-34492 — Interface Enclosure - Small (metal) with 20mm and 25mm knockout
- M200E-SMB — Interface Enclosure (Small) Plastic Previously listed as S4-34493
- S4-34490 — Interface Enclosure Large (Plastic)
- S4-701 — IP21 base and base cover (pack of 1)
- S4-705 — IP21 base covers (pack 5)
- S4-34805-EP — IP67 Vigilon Manual Call Point with Resettable Element
- S4-34418 — Key switch Interface (Single Channel) c\w blue Enclosure
- S4-34600 — LED Driver Board for special Mimics
- S4-34741-99 — Light Shields for Beam Receiver (pack of 5)
- VIG-LPC — Loop Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54). Supports 3400, 34000 & Pre-VAD Squad devices.
- VIG-LPC-EN — Loop Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIG-LPC-V3+ — Loop Card V3+
- S4-34420 — LV Interface 1 Output & 1 Input (no enclosure)
- VIG-MCC-EN-NOD-UPG — Main Control Card - EN 54 Network Node all doors (PLCC extractor necessary)
- VIG-MCC-UPGR — Main Control Card - Vigilon EN 54 panels all doors (PLCC extractor necessary)
- COMPACT-FLUSH-SS — Main Control Panel Stainless Steel Flush Mounting Kit
- S4-34440-02 — Mains Powered Interface - max o/p power 1.5A. Batteries not included - requires 2 x 4015-502-YFR (Power Sonic Flame Retardant 12V 2.1Ah) to meet compliance regulations.
- S4-34440-12 — Mains Powered Interface - max o/p power 2.5A. Batteries not included - requires 2 x 4015-514-YFR (Power Sonic Flame Retardant 12V 12Ah) to meet compliance regulations.
- VIGPLUS-MCC — MCC Control Card for VIGPLUS-24 & VIGPLUS-72 (EN54) C/W Micro SD flash memory card
- 14111-99 — MCP 1106(1102) Glass Pack
- S4-34760-99 — Mounting Bracket
- NANO-24 — Nano Single Loop Control Panel. Non networkable. Batteries not included - requires 2 x 4015-501-YFR (Power Sonic Flame Retardant 12V 7Ah) to meet compliance regulations.
- COMPACT-NC — Network Card for Vigilon Compact (EN Networks only)
- VIG-NC — Network Card for VIGPLUS-24 and VIGPLUS-72 Vigilon Panels (EN54)
- VIG-NC-V3+ — Network Card V3+
- VIG-NPORT-100 — NPORT 100 - RS232 to IP device (single unit 2 required per link)
- S4-34741-50 — Obscuration test card set
- VS-ODOOR-PLUS — Outer Door for VIGPLUS-24 & VIGPLUS-72 (supplied in Black)
- 14112-10 — Pack Of 10 Plastic Test Keys for 34800-EN and 14112-08 MCP
- S4-34491 — Pack of 5 DIN Rail Brackets for LV Interface
- VS-PROLL — Printer Roll For Vig & 34000
- S4T-BASE-PROGRAM — Programmer Base for S4/T/M and S3 Voice Sounders
- S4-34892 — Protective Cover for S4-34800 and S4- 34805 (sold in pack of 20) price per pack
- VIG-19-RACK — Rack Mounting Frame for VIGPLUS-24 in a 19" Rack
- VS-Extractor — Recommended extractor tool for changing Eproms on Panel cards
- 13449-01 — Remote LED (for use with common base S4-700)
- VIG-RPT-FLUSH — Repeat Panel Flush Surround
- VS-BPLANE — Replacement Backplane PCB for Vigilon Panels (VIGPLUS, VIGPLUS-24, VIGPLUS-72)
- VSINTM-PCB-UPG — Replacement Card for Mains Powered Interface (34440)
- S4-34891 — Replacement Glass for S4-34800 (sold in pack of 10) price per pack
- VCS-IDOOR-PLUS — Replacement Inner Door Assembly for Compact Plus and Compact-24 Panel (supplied in Black)
- VS-IDOOR-PLUS — Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 (supplied in Black)
- VS-ODLOCK — Replacement Lock for Vigilon Outer Door
- VCS-MCB-PLUS — Replacement Main Control PCB for Compact Plus Control Panel
- VSRPT-MRC-72 — Replacement MRC for new repeat, A3 & A2 mimic (BS & EN)
- VS-PRIN — Replacement Printer Assembly for Vigilon Panels
- VCS-PSU-N — Replacement PSU for Compact Control Panel
- VS-PSU-24 — Replacement PSU for VIG1-24
- VS-PSU-72 — Replacement PSU for VIG1-72
- VS-CABLE-24 — Replacement Ribbon Cables For VIGPLUS-24 and VIGPLUS-72 Panel
- VS-SPARE-24 — Replacement Spares Pack for Vigilon Control Panels - VIGPLUS-24 & VIGPLUS-72
- S4-34890 — Resettable Element for Vigilon MCP (sold in packs of 10) price per pack
- VSRPT-CABLES — Ribbon Cables for Vigilon Repeats
- 805576 — S-Quad Base Label Plate (pack of 10)
- 781550 — S-Quad Protective cage
- 805580 — S-Quad Removal Tool Kit
- S4-FLUSH — S-Quad Semi-Flush Mounting Kit
- S3EP-VAD-HPR-R — S3 EP (IP66) red Body High Power red VAD
- S3EP-V-VAD-HPR-R — S3 EP (IP66) red Body Voice Sounder High Power red VAD
- S3EP-V-VAD-HPW-R — S3 EP (IP66) red Body Voice Sounder High Power White VAD
- S3EP-S-R — S3 EP (IP66) Sounder red Body
- S3-VAD-HPR-R — S3 red Body High Power red VAD
- S3-S-VAD-HPR-R — S3 red Body Sounder High Power red VAD
- S3-S-VAD-LPR-R — S3 red Body Sounder Standard Power red VAD
- S3-V-VAD-HPR-R — S3 red Body Voice Sounder High Power red VAD
- S3-V-VAD-HPW-R — S3 red Body Voice Sounder High Power White VAD
- S3-BASE-SR — S3 red Shallow base (pack of 5)
- S3-S-R — S3 Sounder red Body
- S3-S-W — S3 Sounder White Body
- S3-V-R — S3 Voice Sounder red Body
- S3-V-W — S3 Voice Sounder White Body
- S3-S-VAD-HPR-W — S3 White Body Sounder High Power red VAD
- S3-BASE-SW — S3 White Shallow base (pack of 5)
- S4BK-711 — S4 Black Dual Optical Heat Sensor
- S4BK-711-V — S4 Black Dual Optical Heat Sensor Voice Sounder
- S4BK-711-V-VAD-HPR — S4 Black Dual Optical Heat Sensor Voice Sounder High Power red VAD
- S4-901 — S4 CO Dual Optical Heat Sensor
- S4-911-V-VAD-HPR — S4 CO Dual Optical Heat Sensor Voice Sounder High Power red VAD
- S4-911-V-VAD-HPW — S4 CO Dual Optical Heat Sensor Voice Sounder High Power White VAD
- S4-711 — S4 Dual Optical Heat Sensor
- S4-711-VAD-HPR — S4 Dual Optical Heat Sensor High Power red VAD
- S4-771-S — S4 Dual Optical Heat Sensor Sounder
- S4-711-V — S4 Dual Optical Heat Sensor Voice Sounder
- S4-711-V-VAD-HPR — S4 Dual Optical Heat Sensor Voice Sounder High Power red VAD
- S4-711-V-VAD-HPW — S4 Dual Optical Heat Sensor Voice Sounder High Power White VAD
- S4-711-V-VAD-LPR — S4 Dual Optical Heat Sensor Voice Sounder Standard Power red VAD
- S4-720 — S4 Heat Sensor
- S4-780-S — S4 Heat Sensor Sounder
- S4-720-V-VAD-HPR — S4 Heat Sensor Voice Sounder High Power red VAD
- S4-715 — S4 Optical Detector
- S4-710 — S4 Optical Heat Sensor
- S4-770-S — S4 Optical Heat Sensor Sounder
- S4TB-711-V-VAD-HPR — S4 SELF TEST Black Dual Optical Heat Sensor + Voice Sounder & High Power Red VAD
- S4T-711 — S4 SELF TEST Dual Optical Heat Sensor
- S4T-711-VAD-HPR — S4 SELF TEST Dual Optical Heat Sensor + High Power Red VAD
- S4T-771-S — S4 SELF TEST Dual Optical Heat Sensor + Sounder
- S4T-711-V — S4 SELF TEST Dual Optical Heat Sensor + Voice Sounder
- S4T-711-V-VAD-HPR — S4 SELF TEST Dual Optical Heat Sensor + Voice Sounder & High Power Red VAD
- S4T-720 — S4 SELF TEST Heat Sensor
- S4T-780-S — S4 SELF TEST Heat Sensor + Sounder
- S4T-720-V-VAD-HPR — S4 SELF TEST Heat Sensor + Voice Sounder & High Power Red VAD
- S4T-710 — S4 SELF TEST Optical Heat Sensor
- S4T-770-S — S4 SELF TEST Optical Heat Sensor + Sounder
- S4M-VAD-LPR — S4M Low Power C Class VAD Red.
- S4M-S — S4M Sounder only
- S4M-V-VAD-LPR — S4M Voice Sounder Low Power C Class VAD Red.
- S4T-DEMO — S4T Self Test Demonstration kit. Includes, S4T-711 O2H ST detector, S4T Programmer Base, Metal Stand, Power supply & leads
- SAFE-WHITE-S-KIT — SAFE 1 button white plus interface
- SAFE-WHITE-S-SPARE — SAFE 1 button white plus loom
- SAFE-RED-D-SPARE — SAFE 2 button Red plus loom
- SAFE-RED-D-KIT — SAFE 2 button Stainless Steel plus inter
- SAFE-SS-D-KIT — SAFE 2 button Stainless Steel plus inter
- SAFE-SS-D-SPARE — SAFE 2 button Stainless Steel plus loom
- SAFE-WHITE-D-KIT — SAFE 2 button White plus interface
- SAFE-WHITE-D-SPARE — SAFE 2 button White plus loom
- VIG-NC-DOM-FO — Secure Domain Bridge Card for VIG1-24 and VIG1-72 Vigilon Panels (EN54 & V3+)
- S4-34499 — Set of 2 Keys for Key switch Interface & MCP
- S4-34411 — Single Channel (output only) Interface c/w Relay - DIN Mounting
- S4-34415 — Single Channel (output only) Interface c/w Relay and Enclosure
- S4-34410 — Single Channel Interface, LV Input only (no enclosure)
- S4-34401 — Single channel Mains switching interface (c/w enclosure)
- VIG-NC-SMF — SMF Network Card
- 2211-200 — Software V3 for PGM VIGPLUS-NC-HYBRID
- 2211-192-4 — Software V4 for PGM COMPACT
- 2211-191-4 — Software V4 for PGM VIGPLUS-MCC
- 14115-KEY — Spare Bulgin key for 14115-08 key operated (pack of 10)
- VS-KEY — Spare Key for Vigilon and Compact Outer Door (Pack of 10)
- VSINT-KEY — Spare Key Pack for 34450 & 34440 (2 keys)
- PRINTER-H-PAPER — Spare Paper Roll - 58mm
- VSINTSC-PCB04 — Spare PCB for S4 Four channel Mains Switching I/F (S4-34404)
- VSINTM-PCB02 — Spare PCB for S4 Mains Powered Interface - 1.5A (S4-34440-02)
- VSINTM-PCB12 — Spare PCB for S4 Mains Powered Interface - 2.5A (S4-34440-12)
- VSINTSC-PCB01 — Spare PCB for S4 Single channel Mains Switching I/F (S4-34401)
- VCS-CABLES — Spare Ribbon Cable set for Compact Panel
- 14112-09EN — Spare Square Glasses Pack of 10 - EN54 Pt11 Version
- NS-SPARE — Spares Pack for Nano
- VCS-SPARE — Spares pack for Vigilon Compact (Fuses, Battery leads etc.)
- VSRPT-SPARE — Spares Pack for Vigilon Repeat Panel
- VIG-DOOR-SS — Stainless Steel Door for Vigilon Main Control Panel
- VIG-RPT-DOOR-SS — Stainless Steel Door for Vigilon Repeat
- VIG-RPT-FLUSH-SS — Stainless Steel Repeat Panel Flush Mounting Kit
- S4-34895 — Surface Back Box (red) for S4-34800 range of MCP's (Sold in packs of 10) price per pack
- 34701 — T Breaker Unit
- S4-34899 — Test Key for S4-34800 range of MCP (sold in packs of 25) price per pack
- VIG72-UPGR — Upgrade Kit to convert Vigilon 24 to Vigilon 72. Batteries not included - requires 4 x 4015-602-YFR (Power Sonic Flame Retardant 12V 21Ah) to meet compliance regulations. Also requires additional Battery Enclosure VS-BATTBOX-72.
- VIG-COMM-LEAD — USB Commissioning Lead and Dongle
- VS-IDOOR-SCREW — Vigilon & Compact Inner Door Screw and Fastener, Pack of 10
- 2211-133 — Vigilon BS Panels and Nodes
- VCS-ODOOR — Vigilon Compact 24hr Outer Door Assembly (supplied in Grey)
- VS-ODOOR — Vigilon Compact 24hr Outer Door Assembly (supplied in Grey)
- COMPACT-PLUS — Vigilon Compact Plus 1-2 loop Control Panel c/w 1 loop card & supplied in black.
- 2211-132 — Vigilon EN Panels and Nodes
- VSRPT-IDOOR-PLUS — Vigilon EN54 Repeat Panel Inner Door Assembly (supplied in Black)
- VSRPT-ODOOR — Vigilon EN54 Repeat Panel Outer Door Assembly (supplied in Grey)
- VIG-NC-HYBRID — Vigilon Hybrid Network Card
- S4-34807 — Vigilon Key switch MCP (supplied without back box)
- VS-LSIM — Vigilon loop simulator
- VIG-MCC-EN — Vigilon Main Control Card EN54 Zonal Display
- VIG-MCC-V3+ — Vigilon Main Control Card V3+ For 8 Line Display
- VIG-FLUSH-SS — Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
- S4-34842 — Vigilon Manual Call Point with Glass Element and Protective Cover (excludes back box)
- S4-34800 — Vigilon Manual Call Point with Glass Element IP 43 (excludes back box)
- S4-34805 — Vigilon Manual Call Point with Resettable Element (excludes back box)
- S4-34845 — Vigilon Manual Call Point with Resettable Element and Protective Cover (excludes back box)
- VIGPLUS-RPT — Vigilon Plus Repeat Panel supplied in black. Batteries not included - requires 2 x 4015-501-YFR (Power Sonic Flame Retardant 12V 7Ah) to meet compliance regulations.
- VIGPLUS-NODE — Vigilon Plus Terminal Node (EN54 version) for use with multiple IO cards and Fibre networks. Supplied in black.
- VSRPT-MRC — Vigilon Repeat Panel MRC for repeats pre-2007 (BS & EN)
- VS-BATT-PCB — Vigilon Replacement Battery Box PCB
- VS-TCARD — Vigilon Replacement Terminal Card
- 704952 — Yellow Fascia for key Switch MCP (for use with S4-34807)
- 704982 — Yellow Surface mount back box for key Switch MCP (for use with S4-34807)
Graphics & Workstation (34)
- WM2140.01 — WINMAG 8 Additional 10,000 data points
- WM2120.01 — WINMAG 8 Additional 2500. Gent Licence provides additional 37,500 data points.
- WM2130.01 — WINMAG 8 Additional 5,000. Gent Licence provides additional 75,000 data points.
- WM2110.01 — WINMAG 8 Additional 500. Gent Licence provides additional 7,500 data points.
- WM2040.01 — WINMAG 8 base package 10000. Gent Licence provides 150,000 data points.
- WM2020.01 — WINMAG 8 base package 1500. Gent Licence provides 22,500 data points.
- WM2050.01 — WINMAG 8 base package 20000. Gent Licence provides 300,000 data points.
- WM2030.01 — WINMAG 8 base package 2500. Gent Licence provides 37,500 data points.
- WM2010.01 — WINMAG 8 base package 500. Gent Licence provides 7,500 data points.
- WM2060.01 — WINMAG 8 base package 50000. Gent Licence provides 750,000 data points.
- WM2210.01 — WINMAG 8 Client - licenses 5 pcs
- WM2220.01 — WINMAG 8 Client - licenses, 10 pcs
- WM2230.01 — WINMAG 8 Client - licenses, 25 pcs
- WM2200.01 — WINMAG 8 Client - single license
- WM5200.01 — WINMAG 8 OPC Client
- WM5100.01 — WINMAG 8 OPC Server
- WM5300.01 — WINMAG 8 OPC/BACnet 500 Tags
- WM4040.01 — WINMAG 8 Option Auto-CAD®
- WM4130.01 — WINMAG 8 Option Escalation
- WM3120.01 — WINMAG 8 Option Fire system Gent
- WM3130.01 — WINMAG 8 Option Fire system Notifier
- WM4030.01 — WINMAG 8 Option Multi-Monitor
- WM4120.01 — WINMAG 8 Option Notification
- WM3140.01 — WINMAG 8 Option Variodyn D1
- WM5700.01 — WINMAG 8 plus BACnet Client
- WM5600.01 — WINMAG 8 plus BACnet Server
- WM5800.01 — WINMAG 8 Software universal gateway for PC
- WM2320 — WINMAG 8 upgrade to newest version. 10,000 Data Points.
- WM2330 — WINMAG 8 upgrade to newest version. 20,000 Data Points.
- WM2310 — WINMAG 8 upgrade to newest version. 2500 Data Points.
- WM2340 — WINMAG 8 upgrade to newest version. 50,000 Data Points.
- WINMAG-SMALL — WINMAG basic package for up to 10 panels
- WINMAG-LARGE — WINMAG basic package for up to 150 panels
- WINMAG-MEDIUM — WINMAG basic package for up to 30 panels
Honeywell CLSS (14)
- CLSS-BC — CLSS Bar Codes, roll of 1000
- HON-CGW-MBB — Fixed CLSS Gateway (Ethernet and Wi-Fi)
- CCM2-GLOBAL — GSM Module
- DXC-UPGR-CLSS — Morley DXC Bundle - Contains Gateway, GSM Module and RS232 card. Bundle price for existing DXc installations.
- ST-LICENSE-1Y — Self-Test 1 Year License
- ST-LICENSE-10Y — Self-Test 10 Year License
- ST-LICENCE-14Y — Self-Test 14 Year License
- ST-LICENSE-3Y — Self-Test 3 Year License
- ST-LICENSE-5Y — Self-Test 5 Year License
- GATEWAY SUBSCRIPTION VESDA — Vesda Detector Connection to CLSS (requires a Gateway)
- VIG-UPGR-CLSS — Vigilon Bundle - Contains Gateway, GSM Module, I/O card, PSU and batteries. Bundle price for existing Vigilon installations.
- GATEWAY SUBSCRIPTION NETWORK SYSTEM — Yearly Gateway Connection Fee for a single Network (Domain).
- GATEWAY SUBSCRIPTION SINGLE PANEL — Yearly Gateway Connection Fee for a Single Panel
- GATEWAY SUBSCRIPTION PRO FM — Yearly Gateway Professional Facility Manager License
Intrinsically Safe Gent (9)
- SOUNDER-EX — Banshee Excel IS28 MK6 ATEX approved sounder (No EN54-3 approval) Monitored
- 803374.EX — Intrinsically Safe Dual Angle Optical Heat Detector - Please use base 805590.
- 803271.EX — Intrinsically Safe Heat Detector (Rate of Rise) - Please use base 805590.
- M1A-R470SG-K013-81 — intrinsically safe indoor call point, 470 ohm. ATEX Approved.
- 803371.EX — Intrinsically Safe Optical Smoke Detector - Please use base 805590.
- W1A-R470SG-K013-81 — Intrinsically safe outdoor call point, 470 ohm.
- VID-EX — IS Flashdome ATEX Approved Visual indicating device (No EN54-23 Approval) Monitored
- 764746 — Z-System Zener barrier for AV device (Drives one sounder or two strobes)
- 764744 — Z-System Zener barrier for intrinsically safe detectors
Li-ion Tamer (29)
- LT-CTR-SML — Ctr LT Gen 3
- LT-CTR-SML-DMK — Ctr Small DIN-Mount Kit LT Gen 3
- LT-ACC-TST — DEC Bump Test Bottle
- LT-ACC-ERO-16 — Ethernet Relay Output 16 port
- LT-ACC-ETS-16 — Ethernet Switch 16 port
- LT-ACC-ETS-5 — Ethernet Switch 5 port
- LT-ACC-ETS-8 — Ethernet Switch 8 port
- LT-ACC-POE-24 — Ethernet Switch PoE, 24 ports
- LT-ACC-POE-4 — Ethernet Switch PoE, 4 ports
- LT-ACC-HUB-MKT — Hub DIN-Rail Mount Kit
- LT-ACC-HUB-PWR-HON — Hub Direct Power LT Gen 3
- LT-ACC-HUB-POE-HON — Hub PoE LT Gen 3
- LT-SEN-M-L — Li-ion Tamer GEN2+ monitoring sensor
- LT-SEN-IM-UL — Li-ion Tamer Interface Module UL
- LT-SEN-MOS — Li-ion Tamer Multi Output System
- LT-SEN-M — Monitoring sensor
- LT-ACC-POE-24-ADR — PoE Switch 24 port, IEC Power Adapter
- LT-ACC-PWR-12 — Power Supply 12VDC
- LT-ACC-PWR-48 — Power Supply 48VDC
- LT-ACC-ERO-MKT — Relay Output DIN-Rail Mount Kit
- LT-ACC-NCL-10 — RJ45 Cable 10' LT Gen 3
- LT-ACC-NCL-100 — RJ45 Cable 100' LT Gen 3
- LT-ACC-NCL-25 — RJ45 Cable 25' LT Gen 3
- LT-ACC-NCL-3 — RJ45 Cable 3' LT Gen 3
- LT-ACC-NCL-5 — RJ45 Cable 5' LT Gen 3
- LT-ACC-NCL-50 — RJ45 Cable 50' LT Gen 3
- LT-SEN-M3 — Sensor Monitoring LT Gen 3
- LT-SEN-R3 — Sensor Reference LT Gen 3
- LT-ACC-SAK — Spare 4xTerminators 1xScrew Adapter
Morley Addressable Devices (73)
- MMX-10ME — 10 way Addressable monitor (input) card (unboxed) complete with end of line resistors, individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's.
- PS340 — 10 X IP 21 SEAL(C 934) BRH/BRS/BGL
- CMX-10RME — 10-way relay control (output) card (unboxed PCB.) contact rating 30 Vdc, 1 A. Complete with individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's
- M221EA — 2 INPUT, 1 OUT MODULE - SYSTEM SENSOR
- MCX-55ME — 5-way Addressable monitor (input) & 5 way relay control (output) card (unboxed) complete with end of line resistors, individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's. Requires back box 797-065
- M501MEA — Addressable "mini" input module. It will interface with contact devices such as security contacts and waterflow switches, suitable for mounting inside monitored equipment
- BPW — Addressable deep base for detector and AV. Pure White Body
- BRR — Addressable deep base for detector and AV. Red
- M5A-RP02FF-K013-01 — Addressable manual call point c/w Isolator. Flexible element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP02FF-01)
- M5A-RP02FG-K013-01 — Addressable manual call point c/w Isolator. Glass element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting.
- M5A-RP01FF-K013-01 — Addressable manual call point no Isolator. Flexible element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP01FF-01)
- M5A-RP01FG-K013-01 — Addressable manual call point no Isolator. Glass element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP01FG-01)
- WPW — Addressable sealed deep base for detector and AV. Pure White Body
- WRR — Addressable sealed deep base for detector and AV. Red
- W5A-RP02SG-K013-01 — Addressable waterproof call point c/w Isolator, IP 67 (Old PN: WCP5A-RP02SG-01)
- W5A-RP01SG-K013-01 — Addressable waterproof call point, no Isolator, IP 67 (Old PN: WCP5A-RP01SG-01)
- M210EA-CZ — Analogue addressable monitor module for supervision of a conventional zone equipped with capacitive EOL element
- M210EA-CZR — Analogue addressable monitor module for supervision of a conventional zone equipped with EOL resistor
- B501AP — Analogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label. PURE WHITE
- WRA-RC-I00 — Body Colour - Red
- WRL-RC-I00 — Body Colour - Red
- WWA-RC-I00 — Body Colour - Red
- WWL-RC-I00 — Body Colour - Red
- BRH-PC-I00 — Body Colour - White
- WRA-PC-I00 — Body Colour - White
- WRL-PC-I00 — Body Colour - White
- WWA-PC-I00 — Body Colour - White
- WWL-PC-I00 — Body Colour - White
- DRM-1 — BS7273 Door Release Module, additional failsafe to be used in conjunction with Morley-IAS output modules to provide a compliant solution to BS7273-4 Category A requirements. Powered from the 12-24v door magnet supply
- SSE-DRS-1 — BS7273 Door Release system. Comprising DRM-1 door release module and M201 single output model prewired and mounted in SMB6-V0 surface mount box. Used provide a compliant solution to BS7273-4 Category A requirements. Powered from the 12-24v door magnet supply. System Sensor protocol
- B524IEFT-1 — Deep analogue sensor base with built in FET isolator, with SEMS screw connections and address identification label
- M200SMB — Deep Module enclosure
- M200E-DIN — DIN rail mounting clip for M2xx series modules
- M220EA — DUAL INPUT MODULE - SYSTEM SENSOR
- DNRE — Duct detector housing complete with B501AP base for Addressable MI-PSE-S2 or MI-PSE-S2I detectors. (Detector not supplied). Requires DSTXX duct sampling tube and MI-PSE-S2 or MI-PSE-S2I detectors.
- TB011 — Flush mounting terminal tray for KAC units (Old PN: ETT-P)
- 52051HTE-26 — Heat high temperature sensor, 78 °C, no Isolator - White. Type BS. Requires B501AP base
- 52051EI-26 — Heat sensor. 58 °C and Rate of Rise c/w Isolator - White. Type A1R. Requires B501AP base
- 52051RE-26 — Heat sensor. 58 °C and Rate of Rise, no Isolator - White. Type A1R. Requires B501AP base
- 52051E-26 — Heat sensor. 58 °C, no Isolator - White. Type A1R. Requires B501AP, base
- M200XE — Loop isolation module. Requires M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails
- 22051E-26 — Low profile Optical Smoke Sensor, no Isolator - White. Requires B501AP base
- 22051EI-26 — Low profile OpticalSmoke Sensor c/w Isolator - White. Requires B501AP base
- 797-065 — Multi-Mount Enclosure. Metal, Morley light grey
- 22051TEI-26 — Multi-sensor combined optical smoke sensor and thermal sensor c/w Isolator in a single housing, - White, Requires B501AP base
- 22051TE-26 — Multi-sensor combined optical smoke sensor and thermal sensor in a single housing, no Isolator - White, Requires B501AP base
- 6500E-26 — Optical beam detector based on reflective technology. Supplied as a combined transmitter/receiver unit with a reflector. Suitable for distances from 10m to 70m.
- M201EA-240 — Output control module System Sensor Protocol.
- BSO-PP-I00 — Pure White Body c/w Isolator. Base Sounder - Addressable loop powered base sounder, EN54-3 approved.
- BSO-PP-N00 — Pure White Body no Isolator. Base Sounder - Addressable loop powered base sounder, EN54-3 approved.
- IBS-LIDPW — Pure White cover plate for base sounders. Pack of 10
- RMK400AP — Recess mounting kit suitable for flush mounting bases into a false ceiling
- WSO-PR-I00 — Red c/w Isolation. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.
- DSS-PC-I00 — Red Flash, Pure White Body, Clear Lens c/w Isolator. Loop-powered EN54-23 Open Category Detector Base Sounder Strobe in pure white. Requires a B501AP base for fast and simple installation for System Sensor detectors and a choice of sound output levels and tones selectable from the device or panel
- BGL-PC-I00 — Red Flash, Pure White Body, Clear Lens, c/w Isolator. Loop-powered EN54-23 C Category - Detector Base Strobe. EN54-23 certified. Coverage volume code: C-3-8.5
- BRS-PC-I00 — Red Flash, Pure White Body, Clear Lens, c/w Isolator. Loop-powered EN54-23 C Category - Standard Performance Detector Base Sounder Strobe. EN54-23 certified. Coverage volume code: C-3-8.5 (Standard) / O-1-3 (Legacy)
- DSS-PC-N00 — Red Flash, Pure White Body, Clear Lens, no Isolator. Loop-powered EN54-23 Open Category Detector Base Sounder Strobe in pure with white. Non-isolated version. Requires a B501AP base for fast and simple installation for System Sensor detectors and a choice of sound output levels and tones selectable from the device or panel
- WSS-PC-N00 — Red Flash, Pure White Body, Clear Lens, non-Isolated. Wall Sounder Strobe - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with Visual Alarm Device (VAD), EN54-23 O class compliant (W-1.9-1.9).
- WST-PC-N00 — Red Flash, Pure White Body, Clear Lens, non-Isolated. Wall VAD - Wall mounted, addressable loop powered EN54-23 O class compliant (W-1.68-1.68).
- WSS-PR-I00 — Red Flash, Pure White Body, Red Lens c/w Isolation. Wall Sounder VID - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with visual indicating device (VID). This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire
- WSS-PR-N00 — Red Flash, Pure White Body, Red Lens, no Isolator. Wall Sounder - Addressable loop powered base sounder, EN54-3 approved, with visual indicating device (VID). This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire.
- WSO-PR-N00 — Red, no Isolator. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.
- M210EA — SINGLE INPUT MODULE - SYSTEM SENSOR
- M201EA — SINGLE OUTPUT MODULE - SYSTEM SENSOR
- CR-6EA — six way changeover relay output with built-in loop isolation. Complete with rotary address switch and plug-in terminal blocks. Requires M200-SMB-MM for mounting
- 22051TLEI-26 — Smoke/Thermal/IR Sensor c/w Isolator - White
- 22051TLE-26 — Smoke/Thermal/IR Sensor, no Isolator - White
- SMB6-V0 — Surface mount box for up to 6 M2xx modules
- SMB500 — Surface Mount Module Box. Plastic, not suitable for M7xx modules
- IM-10EA — Ten input monitor module to provide an interface to a normally open contact devices such as plant outputs or flow switches. Requires back box 797-065
- WB-1AP — Wet base shroud for use with standard bases to allow condensation run off and rear seal. Conduit entry only. Pure White Body
- WSO-PP-I00 — White, c/w isolator, Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.
- WSO-PP-N00 — White, no Isolator. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, Not isolated
Morley Addressable Panels (126)
- 796-177 — 2 Amp PSU for post-Jan 2010 ZX1Se/2Se. PSU only this part does not come with chassis plate
- 796-170 — 2 loop base card for ZX2Se
- 795-077-020 — 20 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 40
- 795-014 — 4-way, Programmable Output Relay Module, PCB only. Requires 24 Vdc supply and an RS485 card to be fitted in the control panel
- 795-015 — 4-way, Programmable Sounder Module, PCB only. Requires 24 Vdc supply and an RS485 card to be fitted in the control panel
- 795-102 — 40 Zone LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door
- 796-162 — 5 loop base PCB for ZX5e/ZX5Se
- 795-077-060 — 60 Zone LED Card, includes PCB, ribbon cable & fixings. Zone LED PCB is fitted below the display card and increases the total number of zone LEDs to 80
- 795-124 — 80 ZONE LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door
- 020-600-002 — Bezel kit for Active or Passive repeaters. Semi-flush mounting, 218 x 307 mm (H x W)
- 795-109-001 — DXc 1 loop base card - Apollo, System Sensor and Hochiki protocols
- 795-110-001 — DXc 2 loop base card - Apollo, System Sensor and Hochiki protocols
- 795-110-002 — DXc 2 loop base card - Morley Protocol
- 795-111 — DXc 2 Loop Expansion Card for use with the DXc4 only
- 795-101 — DXc Extension Box Cover Blank For Extension Box
- 795-121 — DXc extension Box increases the enclosure size of a DXc1, DXc2, or DXc4 control panel to accommodate larger batteries, relays or other equipment by fitting the extension back box, 263 x 390 x 147 (H x W x D).This Extension Box is supplied without covers. Two covers must be used with the box. Any combination of the three listed below can be used: 795-101, 795-103, 795-116
- 795-103 — DXc Extension cover, comes with 80 zone LED card
- 797-090 — DXc Extension EN54-4 compliant PSU backbox increases the enclosure size of a DXc2, or DXc4 control panel to accommodate an additional pair of 17Ah batteries to provide increased system battery standby of up to 34Ah at 24V(depending o the batteries fitted in the panel) . This unit is supplied with the backbox, two cover blanks and an additional power supply unit (PSU). 263 x 390 x 147 (H x W x D)
- 795-118 — DXc key switch kit, Control panels can be fitted with an optional key switch kit fitted by removing the existing label and replacing with a new label supplied with the kit. The flying lead (fitted with a plug) pushes on to the two pins situated at the bottom of the main display PCB
- 795-104 — DXc replacement door for DXc control panels. The spare door fits all three variants of the panel, DXc1, DXc2 & DXc4 and is supplied complete with display PCB, facia label, ribbon cable and lock.
- 795-108-001 — DXc replacement text inserts, pack includes all text inserts/slide-in labels including both blank and numbered labels for Zone LEDs. Pack also includes the User Reference Guide and the Quick Start Manual
- 795-122 — DXc RS232 Card allows the connection of a serial device to the panel such as BMS system or our Visuleyez product range
- 795-097 — DXc Software programming kit (SPK) supports System Sensor, Apollo and Hochiki protocols
- 714-001-111 — DXc1 Single loop panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.
- 795-106 — DXc1 Spare Power supply unit (PSU) for 1 loop panel
- 714-001-221 — DXc2 2 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).
- 795-107 — DXc2/4 Spare Power supply unit (PSU) 2/4 loop panel
- 714-001-241 — DXc4 4 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.391.5 x 390 x 147mm (H x W x D).
- 795-114 — Flush bezel kit for DXc 1 with the extension backbox fitted (small enclosure)
- 795-113 — Flush bezel kit for DXc 2/4 (medium enclosure)
- 795-115 — Flush bezel kit for DXc 2/4 with the extension backbox fitted (medium enclosure)
- 795-112 — Flush bezel kit for DXc1 (small enclosure)
- 795-132 — For use with DXc1-M (714-001-214) & DXc2-M (714-001-224) only. I/O card for EN54-13 compliant sounder circuits, Fire Routing interface, Fault Routing interface and Fire Protection interface. Routing Termination units may be required depending on application. Allows compliance with EN54-2 OWR 7.9.1 and 7.9.2, OWR 7.10, OWR 8.9
- 795-038-001 — Hi-485 communication module, PCB only. Requires an RS485 card to be fitted in the control panel
- POL-200-TS — Intelligent hand-held diagnostic test unit for analogue loops. Supplied complete with internal rechargeable battery and power supply
- 795-051-001 — Internal Printer for use with ZX5Se panels.
- 795-083 — Keyswitch kit. Keyswitch and 2x keys to mount into DX series control panels. Used for Level 2 access, class change and control of functions
- 795-099 — Kit DXc Network Card, In order to connect panels together to create a network a DXc Network card must be fitted to each panel
- 797-076 — L' shaped mounting bracket to fit peripheral PCB's into Zxe/ZX5e/ZXSe
- 020-825 — Lock and key for ZX series control panels
- 795-066-100 — Loop driver card for Apollo Discovery or XP95 protocols, 460mA
- 795-058-105 — Loop driver card for Hochiki ESP protocol, 460mA
- 795-068-100 — Loop driver card for ZX panels, System Sensor protocol, 460mA
- 5000.00.022 — MA-1000-01 Main conrtol board including display LCD - Region 1
- 5000.00.024 — MA-1000-03 Main conrtol board including display LCD - Region 3
- 5000.00.025 — MA-1000-XX Flat Ribbon Cable Kit
- 5000.00.026 — MA-1000-XX Front Door including screws. Ex PBC
- 5000.00.021 — MA-1000-XX PSU - Power Supply unit
- 5000.00.019 — MA-1000-XX User terminal board
- 5000.00.010 — MA-2000-01 Main conrtol board including display LCD - Region 1
- 5000.00.012 — MA-2000-03 Main conrtol board including display LCD - Region 3
- 5000.00.005 — MA-2000-XX & MA-8000-XX Flat Ribbon Cable Kit
- 5000.00.017 — MA-2000-XX & MA-8000-XX Front Door including screws. Ex PBC
- 5000.00.003 — MA-2000-XX & MA-8000-XX User terminal board
- 5000.00.007 — MA-2000-XX PSU - Power Supply unit
- 5000.00.013 — MA-8000-01 Main conrtol board including display LCD - Region 1
- 5000.00.015 — MA-8000-03 Main conrtol board including display LCD - Region 3
- 5000.00.016 — MA-8000-XX 3U Front battery Cover/Blank
- 5000.00.008 — MA-8000-XX PSU - Power Supply unit
- MA-LCD7 — Max 7" Touchscreen repeater/zonal mimic
- 5000.00.006 — Max Battery Cables & temperature probe
- 796-045 — Micro processor pcb (CPU) for ZX series control panels. Supplied without software
- 795-057 — MODBUS interface module. Requires an RS485 card to be fitted in the control panel
- 709-601-001 — Morley-IAS Active Repeater. Silence, Mute, Reset, Accept, Evacuate and Test Controls. Requires 24 Vdc supply and a RS485 card when used with a ZX control panel. 165 x 254 x 50mm (H x W x D)
- E-SIB — Morley-IAS Max Communication dongle for CAN Bus & Serial TPP enablement (MA-2000 & MA-8000 only)
- MA-LIB2-01 — Morley-IAS Max dual Loop card for MA-8000. includes mounting fixtures
- MA-8000-03 — Morley-IAS Max four loop, expandable to eight (networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-8000-01 — Morley-IAS Max four loop, expandable to eight (networkable) For System Sensor & Apollo protocol
- MA-1BZL — Morley-IAS Max MA-1000 Bezel
- MA-2BZL — Morley-IAS Max MA-2000 Bezel
- MA-8BZL — Morley-IAS Max MA-8000 Bezel
- MA-1000-03 — Morley-IAS Max Single loop (non-networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-1000-01 — Morley-IAS Max Single loop (non-networkable) For System Sensor & Apollo protocol
- MA-2000-03 — Morley-IAS Max Stwo loop (networkable) For Morley-IAS, System Sensor & Apollo protocol
- MA-2000-01 — Morley-IAS Max two loop (networkable) For System Sensor & Apollo protocol
- 709-701-001 — Morley-IAS Passive Repeater. Requires 24 Vdc supply and a RS485 card when used with a ZX control panel. 165 x 254 x 50mm (H x W x D)
- 020-891 — Morley-IAS USB Upload/Download Lead. The lead provides the interface between a PC and any Morley-IAS fire alarm control panel
- PL-1000 — PLUS compact addressable fire panel
- PL-LIB01S — PLUS LOOP CARD V2
- 796-017 — Printer paper roll and printer ribbon forZXe/ZXSe internal printer. (795-051-001)
- 795-120 — Rack Mount Bracket for DXc2/4
- 020-820 — Replacement printer paper roll
- 796-180 — Retrofit PSU & base card PCB kit
- 020-773 — Routing Termination Unit 1 (RTU01). Use on the Fault Routing output on the 795-132 to allow full monitoring of the transmission path to transmission device. Allows compliance with EN54-2 OWR 8.9
- 795-005 — RS 232 communication module
- 795-004-001 — RS 485 Communication module
- 795-045 — RS485 to RS232 converter
- 796-171 — Single loop base PCB for ZX1Se
- 795-016 — Sounder booster PSU. Enclosure comprising 24Vdc PSU/Charger and single sounder circuit controller. 500 x 500 x 180mm (H x W x D)
- 797-021 — Spare key for ZX series control panels. Quantity 1
- 020-835 — Spare key switch and keys (901) for Morley repeaters 709-601-001
- 795-084 — Spare keys for 795-083 - Pack of 5
- 796-178 — Spare PSU for ZX5Se post-Jan 2010. PSU only this part does not come with chassis plate
- 795-116 — The custom key plate cover is supplied with a painted metal plate. The metal plate can be removed and drilled to accept key switches or indicators and labelled accordingly by the installer. The custom key plate cover can be used to replace the blank cover supplied with the DXc2/4 control panels or used with the extension backbox, part No. 795-121
- 796-042 — Thermal printer paper roll for ZX External printer 795-060-002
- 796-706 — ZX Series V7.06 replacement software (set of two EPROMS)
- 796-845 — ZX Series V8.45 replacement software (set of two EPROMS)
- 796-855 — ZX Series V8.55 replacement software (set of two EPROMS)
- 796-860 — ZX Series V8.60 replacement software (set of two EPROMS)
- 797-077 — ZX1(S)e & 2(S)e Battery box or mounting enclosure. Size 400 x 400 x 135mm (H x W x D)
- 797-061 — ZX1(S)e/ZX2(S)e Bezel kit. Semi-flush mounting kit for ZX1(S)e or ZX2(S)e control panel. Bezel dimensions 450 x 450 mm (H x W)
- 795-136 — ZX1/2SE Back Box. Includes the metal work only
- 795-141 — ZX1/2SE Door. Metal work only
- 796-183 — ZX1/2Se Retrofit 4 line display kit including display plate and overlay
- 796-175 — ZX1/2Se retrofit PSU kit including chassis
- 797-063 — ZX1SE and ZX2Se Glass Door Kit, comprises a new inner door and plexiglass window allowing controls to protected and recessed within the existing enclosure
- 722-001-301 — ZX1Se single loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , not expandable
- 720-001-301 — ZX2Se 1-2 loop control panel. 230Vac, 2 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , not expandable
- 796-184 — ZX2Se retrofit PSU & base card PCB kit
- 797-078 — ZX5(S)e Battery box or mounting enclosure. Size 500 x 500 x 185mm (H x W x D)
- 721-001-140 — ZX5Se 1-5 loop 140 Zone LED control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. supplied with 140 Zone led's
- 721-001-200 — ZX5Se 1-5 loop 200 Zone LED control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. supplied with 200 Zone LED's
- 721-002-301 — ZX5Se 1-5 loop control panel complete with Stainless Steel door and bezel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 400 x 400 x 135mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , expandable to 40 or 80 with part numbers 795-077-020 or 795-077-060
- 721-001-301 — ZX5Se 1-5 loop control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian. Supplied with 20 zonal LED's , expandable to 40 or 80 with part numbers 795-077-020 or 795-077-060
- 795-137 — ZX5SE Back Box. Metal work only
- 797-062 — ZX5Se Bezel kit. Semi-flush mounting kit for ZX5(S)e control panel. Bezel dimensions 550 x 550mm (H x W)
- 795-142 — ZX5SE Door. Metal work only
- 797-064 — ZX5Se Glass Door Kit, comprises a new inner door and plexiglass window allowing controls to protected and recessed within the existing enclosure
- 796-181 — ZX5Se Retrofit 4 line display including display plate and overlay
- 796-176 — ZX5Se retrofit PSU kit including chassis
- 795-066 — ZXe Loop driver card for Apollo Discovery or XP95 protocol
- 795-048 — ZXe Loop driver card for Apollo Series 90 or XP95 protocol
- 795-058-005 — ZXe Loop driver card for Hochiki ESP protocol
- 795-072 — ZXe Loop driver card for Morley protocol
- 795-044-001 — ZXe Loop driver card for Nittan protocol
- 795-068 — ZXe Loop driver card for System Sensor protocol
Other (34)
- FAAST-8100E — FAAST-8100E
- FAAST-LT — FAAST-LT
- FL0122E — FL0122E
- M200E-PMB — M200E-PMB
- WM2110 — None Data point extension for base package
- WM2140 — None Data point extension for base package
- WM2130 — None DATA POINT EXTENTIONS FOR BASE PACKAGE
- WM5100 — None OPC AND BACNET
- WM5200 — None OPC AND BACNET
- WM5600 — None OPC AND BACNET
- WM4030 — None Option Multi-Monitor
- WM3130 — None Program option for WINMAG plus (ordered separately to upgrade the basic program)
- WM2210 — None WINMAG Client – licenses, 5 pcs
- WM2010 — None WINMAG plus basic package
- WM2030 — None WINMAG plus basic package
- WM2040 — None WINMAG plus basic package
- WM2050 — None WINMAG plus basic package
- WM2060 — None WINMAG plus basic package
- WM2200 — None WINMAG plus Client package (under section '2.3 WINMAG plus CLIENT PACKAGES')
- WM2230 — None WINMAG plus CLIENT PACKAGES
- WM3120 — None WINMAG plus program option (ordered separately to upgrade the basic program)
- OSI-45 — OSI-45
- OSID-DE — OSID-DE
- WM1001 — WM1001
- WM2020 — WM2020
- WM2120 — WM2120
- WM2220 — WM2220
- WM3140 — WM3140
- WM4040 — WM4040
- WM4120 — WM4120
- WM4130 — WM4130
- WM5300 — WM5300
- WM5700 — WM5700
- WM5800 — WM5800
Pipework, Fittings & Fixtures (97)
- 222-059 — 10mm OD Clear DISCRETE END CAP PK10
- 221-036 — 10mm Red Capillary Pipe 100m reel - Clear
- 221-035 — 10mm Red Capillary Pipe 100m reel - RED
- 02-WT-01 — 25 mm Red ABS Self Draining Water Trap
- PIP-025 — 25 mm x 12" Condensation Trap with Ball Valve
- PIP-023 — 25mm 2 way ball valve
- PIP-006 — 25mm ABS 45 Degree Elbow PK10 RED
- PIP-006-W — 25mm ABS 45 Degree Elbow PK10 WHITE
- PIP-017 — 25mm ABS 90 Degree Elbow PK10 RED
- PIP-017-W — 25mm ABS 90 Degree Elbow PK10 WHITE
- PIP-005 — 25mm ABS 90 Degree Slow Bend PK10 RED
- PIP-005-W — 25mm ABS 90 Degree Slow Bend PK10 WHITE
- PIP-007 — 25mm ABS End Cap PK10 RED
- PIP-007-W — 25mm ABS End Cap PK10 WHITE
- PIP-018 — 25mm ABS End Cap Test Point PK10 RED
- PIP-018-W — 25mm ABS End Cap Test Point PK10 WHITE
- PIP-008 — 25mm ABS Equal Tee PK10 RED
- PIP-008-W — 25mm ABS Equal Tee PK10 WHITE
- PIP-001-2.4 — 25mm ABS Pipe 2.4m PK25 RED
- PIP-001-2.4-W — 25mm ABS Pipe 2.4m PK25 WHITE
- PIP-009 — 25mm ABS Pipe Clip PK20 RED
- PIP-009-W — 25mm ABS Pipe Clip PK20 WHITE
- PIP-002 — 25mm ABS Socket Joiner 25MM PK10 RED
- PIP-002-W — 25mm ABS Socket Joiner 25MM PK10 WHITE
- PIP-037 — 25mm ABS to 22mm Copper Socket
- PIP-033 — 25mm Clear condensation drain with manual bung (Short)
- PIP-019 — 25mm Expansion socket
- PIP-021 — 25mm Flexible connector. 30CM RED
- PIP-026 — 25mm Flexible connector. 30CM RED
- PIP-021-W — 25mm Flexible connector. 30CM White
- PIP-026-W — 25mm Flexible connector. 30CM WHITE
- PIP-038 — 25mm Manual Airline Purge Kit
- PIP-024 — 25mm Over Pressure Check Valve
- PIP-003 — 25mm Socket Union PK10 RED
- PIP-003-W — 25mm Socket Union PK10 WHITE
- PIP-016 — 25mm to 10mm ABS Capillary Tee PK10 RED
- PIP-016-W — 25mm to 10mm ABS Capillary Tee PK10 WHITE
- PIP-034 — 25mm to 10mm Capillary Trunk Adapter
- PIP-022 — 25mm to 3/8” Female BSP Tee
- 801607 — 3-Ways Ball Valve or Manual Blow Through Valve Set Complete
- PIP-012 — ABS Solvent Cement 250ml
- VSP-620-01 — ASD SPL PT TAMPER PROOF 6MM CAP
- VSP-620-02 — ASD SPL PT TAMPER PROOF 8MM CAP
- PIP-027 — Capillary Test Point with Cap
- 059-007 — Conical Sample Kit - 2m flexible 10mm tube, T piece and head
- 059-007-W — Conical Sample Kit - 2m flexible 10mm tube, T piece and head(White)
- 144-013 — Conical Sample Point Head only (for 10 mm OD tube)
- VSP-877 — Flush Mount Sampling Point Head Only
- VSP-877-B — Flush Mount Sampling Point Head Only
- VSP-877-G — Flush Mount Sampling Point Head Only
- PIP-015 — Flush Sample Point Head Only (for 10mm OD Tube)
- 059-001 — Flush Sample Point Kit - 2m flexible 10mm tube, T piece and Head
- 059-001-W — Flush Sample Point Kit - 2m flexible 10mm tube, T piece and Head(White)
- F-PC-HE-2 — Freezer clip for ASD pipework 2.0mm
- F-PC-HE-2.5 — Freezer clip for ASD pipework 2.5mm
- F-PC-HE-3 — Freezer clip for ASD pipework 3.0mm
- F-PC-HE-3.5 — Freezer clip for ASD pipework 3.5mm
- F-PC-HE-4 — Freezer clip for ASD pipework 4.0mm
- F-PC-HE-4.5 — Freezer clip for ASD pipework 4.5mm
- F-PC-HE-5 — Freezer clip for ASD pipework 5.0mm
- F-PC-HE-5.5 — Freezer clip for ASD pipework 5.5mm
- F-PC-HE-6 — Freezer clip for ASD pipework 6.0mm
- F-PC-HE-6.5 — Freezer clip for ASD pipework 6.5mm
- VSP-021 — Imperial Pipe Adaptors pack of 4
- VSP-855-4 — In-Line Filter Elements (4pk)
- VSP-850-G — In-Line Filter Grey
- VSP-850-R — In-Line Filter Red
- VSP-870 — Inline Flow Restrictor Assembly for Refrigeration Sampling
- 128-014-XTR — Label - Sampling Point
- E700-SP-DCL — Label - Sampling Point Wrap Round Label 23mm/4mmt hole
- 128-015 — Label - Smoke Detector Pipe
- RSV-R25 — Non Return Valve
- PIP-014 — PIPE CUTTER
- PIP-004 — Red ABS 3.4'' x 25mm Adaptor (Pack of 10)
- VSP-860 — Refrigerated storage sampling kit
- 251-003 — Smoke pellets (8 tablets)
- VSP-810 — Smoke Test Pen
- VSP-811 — Smoke Test Pen Refill
- F-PC-0 — Standard-Clip for ASD pipework 0.0mm
- F-PC-2 — Standard-Clip for ASD pipework 2.0mm
- F-PC-2.5 — Standard-Clip for ASD pipework 2.5mm
- F-PC-3.5 — Standard-Clip for ASD pipework 3.5mm
- F-PC-4.5 — Standard-Clip for ASD pipework 4.5mm
- F-PC-5 — Standard-Clip for ASD pipework 5.0mm
- F-PC-5.5 — Standard-Clip for ASD pipework 5.5mm
- F-PC-6 — Standard-Clip for ASD pipework 6.0mm
- F-PC-6.5 — Standard-Clip for ASD pipework 6.5mm
- F-PC-3 — Standard-Clip for ASD pipework3.0mm
- F-PC-4 — Standard-Clipfor ASD pipework 4.0mm
- 251-002 — Test Matches 12Pk
- VTT-10000-UK — Test Transformer (Wire Burn)
- 251-001 — Test Wire 100m
- PIP-039 — VESDA Exhaust Silencer
- VSP-871 — VESDA RESTRICTOR FLOW PK10
- PIP-044 — Xtralis Flush Sampling Kit
- VSP-620-03 — Xtralis Tamperproof Sampling Point 10mm Capillary Tube
- VSP-610 — Xtralis Tamperproof Sampling Point 25mm Standard Pipe
Voice Alarm (56)
- 582423 — 10 watt surface mounted round loudspeaker BS EN 54-24
- 582473 — 10 watt uni-directional sound projector BS EN 54-24
- 582479 — 15 watt horn loudspeaker BS EN 54-24
- 582460 — 16watt EN54-24 approved Sound Spherwe
- 582475 — 20 watt bi-directional sound projector BS EN 54-24
- 582476 — 20 watt column loudspeaker BS EN 54-24
- 582474 — 20 watt uni-directional sound projector BS EN 54-24
- 582480 — 24 watt coaxial 2-Way ceiling loudspeaker c/w metal rear cover (6.5”) BS EN 54-24
- 582432 — 30 watt horn loudspeaker BS EN 54-24
- 582433 — 30 watt music horn loudspeaker BS EN 54-24
- 585033 — 4 Ch 1200W Class D Amp w/ Power Sharing
- 585030 — 4 Ch 125W Class D Amp w/ Inbuilt Batt Ch
- 585034 — 4 Ch 2000W Class D Amp w/ Power Sharing
- 585031 — 4 Ch 250W Class D Amp w/ Inbuilt Batt Ch
- 585302 — 4 Channel amplifier output cable
- 582477 — 40 watt column loudspeaker BS EN 54-24
- LSC-506 — 6 watt ceiling loudspeaker c/w metal rear cover (5.5”)
- LSC-606 — 6 watt ceiling loudspeaker c/w metal rear cover (6.5”) BS EN 54-24
- LSC-606/DC — 6 watt ceiling loudspeaker c/w metal rear cover with DC blocking capacitor (6.5”) BS EN 54-24
- 582407.SAFE — 6 watt ceiling speaker for shallow ceiling voids (5") BS EN 54-24
- 582408.SAFE — 6 watt ceiling speaker for shallow ceiling voids (6.5") BS EN 54-24
- 582425 — 6 watt flush mounted wall loudspeaker (6.5") BS EN 54-24
- 582426 — 6 watt IP 54 rated ABS wall mounted cabinet speaker (6.5") BS EN 54-24
- 582401 — 6 watt IP 55 rated ceiling speaker (6.5") c/w metal rear cover BS EN 54-24
- 582470 — 6 watt wall mounted metal cabinet loudspeaker (4”) BS EN 54-24
- 585301 — 8 Channel amplifier output cable
- 585020 — 8 Speaker Line Module
- 585305 — Amplifier backup cable - 1 channel
- 585306 — Amplifier backup cable - 2 channel
- 583318 — Clear plastic button covers (spares)
- 583520 — DCS Plus - digital call station for routine and emergency paging with redundancy option
- 583504.RE — DCSF1 - Fireman's emergency microphone - single button with redundancy option
- 583503.RE — DCSF12 - Fireman's emergency microphone (12 Buttons) with redundancy option
- 583526 — DKM Plus - 18 button digital key module for use with DCS Plus
- 583506 — DKM18 - Fireman's emergency microphone extension module
- 583362.22IPMSG — DOM4-24 - digital output module for up to 24 loudspeaker circuits
- 583361.22IPMSG — DOM4-8 - digital output module for up to 8 loudspeaker circuits
- 583496 — EOL - end of line module for all 100 V speaker circuits
- 583527 — ETCS - Ethernet touchscreen call station
- 582451 — IC Audio TS-C 20-500/T-EN54 20 watt column speaker BS EN 54-24
- 582452 — IC Audio TS-C 30-700/T-EN54 30 watt column speaker BS EN 54-24
- 582453 — IC Audio TS-C 50-1000/T-EN54 50 watt column speaker BS EN 54-24
- 585000.33 — INC w/ Aud In/ Out Module & 12 GPIOs
- 585000.31 — INC w/ DAL Module 8 DAL ports & 12 GPIOs
- 585000.32 — INC w/ DANTE Module 8X8 & 12 GPIOs
- 585000 — INC w/o any optional modules
- 583311 — Key Cover Flap KCF3
- 582407.FD — Metal rear cover for 582407.SAFE BS EN 54-24
- 582408.FD — Metal rear cover for 582408.SAFE BS EN 54-24
- 580248.11 — Power amplifier 4 x 300 W / 100 V, Class D, 24 V DC
- 580249.11 — Power amplifier 4 x 500 W / 100 V, Class D, 24 V DC
- 585052 — Power Supply 1U - 24VDC/ 380A
- 585053 — Power Supply 2U - 24VDC/ 640A
- 584963 — Replacement lock cylinder for DCSF protective cabinet
- 583381.31 — SCU - System communication unit
- 585001 — Universal Inteface Module
Wireless (24)
- SOLOADAPT HWKIT — Adapter for No Climb Solo poles - for use with CUP HWKIT
- 52051E-RF — Agile 58°C Fixed Temperature Heat Detector. Wireless fixed temperature (58°c) heat detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- M200G-RF-26 — Agile Gateway. Loop-powered Gateway device for System Sensor Agile wireless system. Up to 8 Gateways may be used on the same loop. This requires a B501AP base. Compatible with DXc panels only
- 22051E-RF-26 — Agile Photo Detector. Wireless optical smoke detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 22051TLE-RF-26 — Agile Photo-Thermal-IR Detector. Wireless Optical, Thermal & Infra-Red detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- 52051RE-RF — Agile Rate of Rise Heat Detector. Wireless 'Rate of Rise' heat detector for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- M200F-RF — Agile Repeater. Network Repeater for extending the range of System Sensor Agile wireless networks. Powered by 4 x CR123A 3v batteries
- M200WC-RF-PRO — Agile Waterproof Wireless Manual Call Point RF 868 MHz System Sensor PRO
- R5A-RF — Agile WCP call point. Waterproof Manual Call Point for the System Sensor Agile wireless system. With magnetic anti-tamper mechanism and IP67-rating. Powered by 4 x CR123A 3v batteries
- B501RF — Agile Wireless Detector/Repeater Base. Base for Agile wireless detectors, repeater and sounder
- B501RF-RR — Agile Wireless Detector/Repeater Base. Base for Agile wireless sounders red
- M200I-RF — Agile Wireless Remote Indicator for System Sensor Agile wireless systems. Indicates the status of up to four System Sensor Agile wireless detectors via three coloured LEDs
- WSO-RR-RF — Agile Wireless Wall Mounted Addressable Sounder - RED for the System Sensor Agile wireless system.
- WSO-WW-RF — Agile Wireless Wall Mounted Addressable Sounder - WHITE for the System Sensor Agile wireless system. Powered by 4 x CR123A 3v batteries
- CUP HWKIT — CUP. Cup for setup and maintenance of Agile wireless detectors. For use with telescopic pole (POLE HWKIT)
- 803374 — Dual Optical Heat Smoke sensor
- 803271 — Heat Sensor Rate Of Rise
- 803371 — Optical Sensor (Compatible device with radio base)
- POLE HWKIT — POLE. Telescopic access pole for setup and maintenance of Agile wireless systems. Extends from 1.5 to 5.2m in length
- 789862.1 — Programming PC Interface for Wireless Transponder
- 805597 — Replacement Battery Pack for 805593 & 805601
- 805593.1 — Wireless Detector Base (EN54 pt 25)
- 803-MCP-KIT — Wireless Manual Call Point including MCP and Wireless Interface
- 805595.1 — Wireless Transceiver Interface for communicating with Wireless devices (EN54 pt 25)
Xtralis (234)
- 020-052 — 19” Rack enclosure (2 rows)
- 020-055 — 19” Rack enclosure (5 rows)
- VPS-215-E5 — 24Volt 0.5 amp Power Supply Unit
- VPS-220-E5 — 24Volt 0.5 amp Power Supply Unit
- VPS-250-E5 — 24Volt 3 amp Power Supply Unit
- VEP-A10-P — 4 Pipe VEP with 3.5" Touchscreen Display - Black Plastic
- VEP-A00-P — 4 Pipe VEP with FOK LED's - Black Plastic
- VSW-216 — Additional PC licence / PC
- F-A3384-000 — AIR FILTER FOR FAAST 7100E, 8100E & 9400X
- 020-050-E — ASD ENCL IP66 VESDA-E
- S4-34440-ASD — ASD Mains Powered Interface for FAAST LT. Batteries not included - requires 2 x 4015-604-YFR (Power Sonic Flame Retardant 12V 14Ah) to meet compliance regulations.
- VSP-200 — Blank Plate EMC no Logo
- VSP-000 — Blank Plate Non-EMC with Logo
- VSINT-PCB-LT — Connection PCB for FAAST Interface (FAAST LT)
- VSP-002 — Display
- FLX-020 — Dual channel ASD unit
- MI-FLX-020 — Dual channel ASD unit - System Sensor Protocol Addressable loop connected
- F-BO-AFE70-2 — FAAST Automatic Purging Unit
- F-BO-AFE70-3 — FAAST Automatic Purging Unit- Freezer Applications
- FLX-SP-04 — FAAST Flex
- FLX-SP-06 — FAAST FLEX ADAPTER SET
- FLX-SP-03-EN — FAAST Flex Aspirating Smoke Detector Accessory: Front Cover
- FLX-SP-05-EN — FAAST Flex Aspirating Smoke Detector Accessory: Internal Cover Set
- FLX-SP-01 — FAAST Flex Aspirating Smoke Detector Accessory: Sensing Module
- FLX-SP-02 — FAAST FlexAspirating Smoke Detector Accessory: Metal Filter: Pack of 6
- F-LT-EB — FAAST LT Earth Bar
- P87-0511-001 — FAAST LT Replacement Fan Assembly
- G07-0199-000 — FAAST LT Replacement Fan Gasket
- FL-IF-2 — FAAST LT Spare Filter, Pack of 2
- F-INF-25 — FAAST LT200 External Pipe Filter
- F-INF-25-RF — FAAST LT200 External Pipe Filter - Replacement Filter Pack. Pack of 4.
- FLT2-AB-SA2 — FAAST LT200 Standalone dual channel accessories box
- VSP-005 — Filter Cartridge
- VSP-025 — Filters '20' pack
- VSW-206 — First PC licence
- VHH-100 — Handheld programmer + leads
- ISP-001 — ICAM Replacement black filter element - course (20 ppi)
- ISP-002 — ICAM Replacement black filter element - fine (45ppi)
- VSP-509 — LaserCOMPACT RO 9 pin lead
- VHX-1320 — Metal Box HLI - Access Protocol
- VHX-1310 — Metal Box HLI - Master-Slave
- VHX-1400 — Metal box HLI - Modbus Type 1
- VHX-1410 — Metal box HLI - Modbus Type 2
- VHX-1420 — Metal box HLI - Modbus Type 3
- VHX-1300 — Metal Box HLI - Peer to Peer
- VHX-0410 — Modbus HLI for Darwish & Honeywell only
- VHX-0400 — Modbus MK1 HLI
- VIC-020 — Multi-function Control Card
- VIC-030 — Multi-function Control Card with MPO
- VHX-0200 — PC Link HLI + leads
- VHX-0300 — PC Link HLI + leads (Open Protocol)
- VHX-0320 — PC Link HLI Access Protocol
- VHX-0420 — PC Link HLI Modbus MK3
- VHX-0310 — PC Link HLI Open Protocol Master/Slave
- VSP-001 — Programmer
- VSP-102 — Relay processor module
- VRT-J00 — Remote Compact Displays (7 Relays)
- VRT-K00 — Remote Compact Displays (No relays)
- VRT-200 — Remote Display (7 relays)
- VRT-600 — Remote Display No Relays
- VRT-000 — Remote Mounting Box Only
- VSW-600 — Remote Notification by Email
- VRT-100 — Remote Programmer
- VRT-900 — Remote Relays (12 Relays)
- VRT-500 — Remote Relays (7 Relays)
- VRT-E00 — Remote Relays (7 relays) Scanner Only
- VRT-400 — Remote Scan display (7 relays)
- VRT-800 — Remote Scanner Disp (12 Relays)
- VRT-700 — Remote Scanner Disp No Relays
- VSP-208 — Remote Termination Card (12 relay)
- VSP-008 — Remote Termination Card (7 relays)
- VSP-007 — Remote Termination Card (no relay)
- VRT-300 — Remote VESDAnet socket
- F-SEN-SSE — Replacement sensor for FAAST LT200 - Standalone
- VSP-004 — Scanner Display
- VSP-103 — Scanner Relay processor module
- FLX-010 — Single channel ASD Unit
- MI-FLX-010 — Single channel ASD Unit -System Sensor Protocol Addressable loop connected
- VEP-A00-1P — Single Pipe VEP with FOK LED's - Black Plastic
- VLF-250-00 — Small Area Detector
- VLF-500-00 — Smallish Area Detector
- VSINT-PCB-ASD — Spare PCB for Vigilon ASD Interface
- VSR-0031 — Sub-rack with 2 x blank plates, VESDAnet socket and a programmer
- VSR-2200 — Sub-rack with 2 x VEP Displays with 2 x blanking plates
- VSR-2220 — Sub-rack with 3 x VEP Displays with 1 x blanking plate
- VSR-0000 — Sub-rack with 4 blanks
- VSR-2222 — Sub-rack with 4 VEP displays
- VRT-S07 — System Relay Module
- VSW-501 — Text to speech (add voice message)
- VHX-1200 — V skt and HLI in enclosure
- VSP-990-NYLON-BLK — VEA 6mm Microbore Nylon Black 100m
- VSP-979 — VEA M/bore Tube Cutter 3 Pack
- VSP-978 — VEA Sample Point Head Removal Key
- VSP-969-04 — VEP-A10-P Front Cover - Plastic - LCD - 3.5" Display
- VSP-955-04 — VES Scanner Manifold
- VSP-969-04-S — VES-A10-P Front Cover - Plastic - LCD - 3.5" Display
- XCL-VEA-CH4-RA — VESDA CH4 0-100%LEL 4-20mA REL XCL VEA
- XCL-VEA-CH4-RA-5 — VESDA CH4 0-100%LEL 4-20mA REL XCL VEA
- XCL-VEA-CH4-RM — VESDA CH4 0-100%LEL MODBUS REL XCL VEA
- XCL-VEA-CO-RA — VESDA CO 300PPM 4-20mA REL VEA
- XCL-VEA-CO-RA-5 — VESDA CO 300PPM 4-20mA REL XCL VEA
- XCL-VEA-CO-RM — VESDA CO 300PPM MODBUS REL XCL VEA
- XCL-VEA-CO2VV-RA — VESDA CO2 5% V/V 4-20mA REL XCL VEA
- XCL-VEA-CO2VV-RM — VESDA CO2 5% V/V MODBUS REL XCL VEA
- XCL-VEA-CO2PP-RA — VESDA CO2 5000PPM 4-20mA REL XCL VEA
- XCL-VEA-CO2PP-RM — VESDA CO2 5000PPM MODBUS REL XCL VEA
- XCL-VEA-H2-RA — VESDA H2 1000PPM 4-20mA REL XCL VEA
- XCL-VEA-H2-RA-5 — VESDA H2 1000PPM 4-20mA REL XCL VEA
- XCL-VEA-H2-RM — VESDA H2 1000PPM MODBUS REL XCL VEA
- XCL-SC-CO2VV — VESDA RPL SENS CO2 5% V/V SP XCL
- XCL-SC-CO2PP — VESDA RPL SENS CO2 5000PPM SP XCL
- XCL-M20-CG — VESDA Sensepoint XCL Cable Glands - Pack of 10
- XCL-VEA-CAL — VESDA Sensepoint XCL Calibration/Flow Cap for VEA
- XCL-FILTER — VESDA Sensepoint XCL Replacement Filter - Pack of 10
- XCL-COVER — VESDA Sensepoint XCL Sensor Cover with Gasket
- XCL-VEA-TUB — VESDA Sensepoint XCL Tubing Interface for VEA
- VSP-1005 — VESDA-E 4-6mm SPL PT TUBE CONVERTER VEA
- VSP-963 — VESDA-E Aspirator
- VSP-969-S — VESDA-E COVER FR 3.5" DISP VES-A10-P
- VSP-964-03 — VESDA-E DET CHAMBER MK3
- VSP-962 — VESDA-E Filter
- VSP-962-20 — VESDA-E Filter - Pack of 20
- VSP-960 — VESDA-E Mounting Bracket
- VSP-1010 — VESDA-E REL PCA KIT VEA
- VSP-965 — VESDA-E Sampling Chamber
- VSP-956 — VESDA-E SERIES VEP/VEU Manifold
- VSP-980-ST — VESDA-E SS SPL PT VEA
- VSP-1008 — VESDA-E SS SPL PT VEA DUCT KIT
- VSP-1007 — VESDA-E SS SPL PT VEA INSTAL TOOL
- VPS-220-STX5 — VESDA-E STX PSU 0.5A (7-14AH) - BLACK
- VPS-220-STX5-SLV — VESDA-E STX PSU 0.5A (7-14AH) - SILVER
- VPS-250-STX5-SLV — VESDA-E STX PSU 3A (7-24AH )- SILVER
- VPS-250-STX5 — VESDA-E STX PSU 3A (7-24AH) - BLACK
- VKT-855 — VESDA-E VE Scanner demo kit
- VES-A10-P — VESDA-E VE Scanner detector with 3.5" Display
- VES-A00-P — VESDA-E VE Scanner detector with LED's
- VER-A40-40-STX — VESDA-E VEA 40-Relay Local StaX
- VSP-991 — VESDA-E VEA 4mm Microbore Tube 500ft UL Compliant - reel of 150m
- VSP-981-B22 — VESDA-E VEA 4mm Standard Sampling Point (22) Black
- VSP-981-W22 — VESDA-E VEA 4mm Standard Sampling Point (22) White
- VSP-981-B — VESDA-E VEA 4mm Standard Sampling Point Black
- VSP-981-W — VESDA-E VEA 4mm Standard Sampling Point White
- VSP-983-B — VESDA-E VEA 4mm Surface Mount Sampling Point Black
- VSP-983-B22 — VESDA-E VEA 4mm Surface Mount Sampling Point Pk of 22 Black
- VSP-983-W22 — VESDA-E VEA 4mm Surface Mount Sampling Point Pk of 22 White
- VSP-983-W — VESDA-E VEA 4mm Surface Mount Sampling Point White
- VSP-1004 — VESDA-E VEA 4mm to 4mm RA Joiner (10)
- VSP-1002 — VESDA-E VEA 4mm to 4mm Straight Union (10)
- VSP-998 — VESDA-E VEA 6mm Blanking Plug (50)
- VSP-990-330 — VESDA-E VEA 6mm Microbore Tube UL-compliant Plenum-rated (330ft)
- VSP-980-B22 — VESDA-E VEA 6mm Standard Sampling Point (22) Black
- VSP-980-W22 — VESDA-E VEA 6mm Standard Sampling Point (22) White
- VSP-980-B — VESDA-E VEA 6mm Standard Sampling Point Black
- VSP-980-W — VESDA-E VEA 6mm Standard Sampling Point White
- VSP-982-B — VESDA-E VEA 6mm Surface Mount Sampling Point Black
- VSP-982-B22 — VESDA-E VEA 6mm Surface Mount Sampling Point Pk of 22 Black
- VSP-982-W22 — VESDA-E VEA 6mm Surface Mount Sampling Point Pk of 22 White
- VSP-982-W — VESDA-E VEA 6mm Surface Mount Sampling Point White
- VSP-1000 — VESDA-E VEA 6mm to 4mm Reducer (10)
- VSP-1003 — VESDA-E VEA 6mm to 6mm RA Joiner (10)
- VSP-1001 — VESDA-E VEA 6mm to 6mm Straight Union (10)
- VSP-977 — VESDA-E VEA Filter Box of 10 Spare
- VSP-972 — VESDA-E VEA Filter Spare
- VSP-973 — VESDA-E VEA Pump MkII Spare
- VSP-974 — VESDA-E VEA Rotary Valve MkII Spare
- VSP-975 — VESDA-E VEA-040-A00 LED Front Cover Spare
- VSP-976 — VESDA-E VEA-040-A10 LCD Front Cover Spare
- VEA-040-A10 — VESDA-E VEA-40 Det with 3.5" Display
- VEA-040-A00 — VESDA-E VEA-40 Det with LEDs
- VSP-970 — VESDA-E VEA-40 Mounting Bracket Spare
- VSP-971 — VESDA-E VEA-40 Smoke Sensor Module Spare
- VSP-968 — VESDA-E VEP-A00-P/1P Front Cover Plastic LEDs
- VSP-969 — VESDA-E VEP-A10-P Front Cover Plastic 3.5" Display
- VSP-955 — VESDA-E VES SCANNER MANIFOLD
- VSP-966 — VESDA-E VEU-A00 Front Cover LEDs
- VSP-967 — VESDA-E VEU-A10 Front Cover 3.5" Display
- VSP-1006 — VESDA-E VOL CHAMBER VEA
- VIC-010 — VESDAnet Card for FOCUS
- VSW-356 — VESDAnet Detector Connection per detector
- VSW-346 — VESDAnet network connection
- VSP-003 — VESDAnet Socket Kit
- VSW-366 — VESDAtalk/VESDAlink Detector Connection
- VEU-A10 — VEU with 3.5" Display
- VEU-A00 — VEU with LEDs
- VSP-967-04 — VEU-A10 Front Cover - Aluminium - LCD - 3.5" Display
- VSP-956-04 — VEU, VEP, VEP-1P spare manfold
- VSP-964-04 — VEU, VEP, VEP-1P, VES. Spare Smoke Detection Chamber
- VSP-704 — VLF English & Icon Display
- VRT-V00 — VLF Remote Display with Relays
- VRT-W00 — VLF Remote Display without Relays
- VSP-722 — VLF-250 Aspirator Assembly (1 fan)
- VSP-715 — VLF-500 Aspirator Assembly (2 fans)
- VSP-032 — VLI Aspirator
- VSP-033 — VLI Chamber Assembly
- VSP-030 — VLI Intelligent Filter
- VSP-035 — VLI Remote Display Module
- VRT-Q00 — VLI Remote Display With Relays
- VRT-T00 — VLI Remote Display without Relays
- VSP-031 — VLI Secondary filter
- VSP-036 — VLI Ultrasonic Flow Sensor Manifold Spare
- VSP-034 — VLI VESDAnet Card Spare Part
- VLI-880 — VLI with relays and Ethernet only
- VLI-885 — VLI with VESDAnet
- XCL-LB-NH3-RA — XCL Ammonia (NH3) 100ppm (4-20mA Relays)
- XCL-LB-NH3-RM — XCL Ammonia (NH3) 100ppm (Modbus & Relays)
- XCL-LB-CO2PP-RA — XCL Carbon Dioxide (CO2) 5,000ppm (4-20mA Relays)
- XCL-LB-CO2PP-RM — XCL Carbon Dioxide (CO2) 5,000ppm (Modbus & Relays)
- XCL-LB-CO2VV-RA — XCL Carbon Dioxide (CO2) 5.0%V/V (4-20mA Relays)
- XCL-LB-CO2VV-RM — XCL Carbon Dioxide (CO2) 5.0%V/V (Modbus & Relays)
- XCL-LB-CO-RA — XCL Carbon Monoxide (C0) 0-300PPM (4-20mA Relays)
- XCL-LB-CO-RM — XCL Carbon Monoxide (C0) 0-300PPM (Modbus & Relays)
- XCL-LB-CH4-RA — XCL Flammable 100 %LEL, (4-20mA Relays)
- XCL-LB-CH4-RM — XCL Flammable 100 %LEL, (Modbus & Relays)
- XCL-LB-H2-RA — XCL Hydrogen (H2) 1,000ppm (4-20mA Relays)
- XCL-LB-H2-RM — XCL Hydrogen Hydrogen (H2) 1,000ppm (Modbus & Relays)
- XCL-LB-H2S-RA — XCL Hydrogen Sulphide (H2S) 50ppm (4-20mA Relays)
- XCL-LB-H2S-RM — XCL Hydrogen Sulphide (H2S) 50ppm (Modbus & Relays)
- XCL-LB-ELB — XCL Large Bore 60° Pipe Elbow
- XCL-LB-NO2-RA — XCL Nitrogen Dioxide (NO2) 20ppm (4-20mA Relays)
- XCL-LB-NO2-RM — XCL Nitrogen Dioxide (NO2) 20ppm (Modbus & Relays)
- XCL-LB-O2-RA — XCL Oxygen (O2) 0 to 25 %v/v, (4-20mA Relays)
- XCL-LB-O2-RM — XCL Oxygen (O2) 0 to 25 %v/v, (Modbus & Relays)
- XCL-SC-CH4 — XCL Sensor-Flam Catalytic
- XCL-LB-FLT-2 — XCL Spare Filter - CO, O2, H2S, H2 & NO2 - pack of 10
- XCL-LB-FLT-1 — XCL Spare Filter - LEL, NH3 & CO2 - pack of 10
- XCL-LB-CAP — XCL Spare Flow Cap
- XCL-LB-COV-2 — XCL Spare Sensor Cover - CO, O2, H2S, H2 & NO2
- XCL-LB-COV-1 — XCL Spare Sensor Cover - LEL, NH3 & CO2
- XCL-XRL-SC-CO — XCL/XRL Replacement Sensor - Oxygen (O2)
- XCL-XRL-SC-H2 — XCL/XRL Replacement Sensor Hydrogen (H2)
- XCL-SC-H2S — XCL/XRL Replacement Sensor Hydrogen Sulphide (H2S)
- XCL-SC-NH3 — XCL/XRL Replacement Sensor-Ammonia (NH3)
- XCL-SC-NO2 — XCL/XRL Replacement Sensor-Nitrogen Dioxide (NO2)
- XCL-SC-O2 — XCL/XRL Replacement Sensor-O2