ex-VAT pricing shown

FireAgent
Now open for trade ordersGent, Morley-IAS & Xtralis stock added weekly — open to the trade.

Category

Morley Addressable Devices

All categories

Morley Addressable Devices covers addressable detection and bases, including analogue and deep sensor bases (with and without isolators), sealed bases for detector and AV, cover plates, shrouds and recess mounting kits. Detectors include fixed and rate-of-rise heat sensors, low-profile optical smoke sensors, optical/thermal multi-sensors and smoke/thermal/IR sensors, alongside addressable manual and waterproof IP67 call points.

73 results

BGL-PC-I00

Red Flash, Pure White Body, Clear Lens, c/w Isolator. Loop-powered EN54-23 C Category - Detector Base Strobe. EN54-23 certified. Coverage volume code: C-3-8.5

£68.78
ex VAT
£82.54 inc VAT
Add to quote
BRH-PC-I00

Body Colour - White

£81.33
ex VAT
£97.60 inc VAT
Add to quote
BRS-PC-I00

Red Flash, Pure White Body, Clear Lens, c/w Isolator. Loop-powered EN54-23 C Category - Standard Performance Detector Base Sounder Strobe. EN54-23 certified. Coverage volume code: C-3-8.5 (Standard) / O-1-3 (Legacy)

£72.96
ex VAT
£87.55 inc VAT
Add to quote
BSO-PP-I00

Pure White Body c/w Isolator. Base Sounder - Addressable loop powered base sounder, EN54-3 approved.

£44.25
ex VAT
£53.10 inc VAT
Add to quote
BSO-PP-N00

Pure White Body no Isolator. Base Sounder - Addressable loop powered base sounder, EN54-3 approved.

£39.10
ex VAT
£46.92 inc VAT
Add to quote
DSS-PC-I00

Red Flash, Pure White Body, Clear Lens c/w Isolator. Loop-powered EN54-23 Open Category Detector Base Sounder Strobe in pure white. Requires a B501AP base for fast and simple installation for System Sensor detectors and a choice of sound output levels and tones selectable from the device or panel

£57.50
ex VAT
£69.00 inc VAT
Add to quote
DSS-PC-N00

Red Flash, Pure White Body, Clear Lens, no Isolator. Loop-powered EN54-23 Open Category Detector Base Sounder Strobe in pure with white. Non-isolated version. Requires a B501AP base for fast and simple installation for System Sensor detectors and a choice of sound output levels and tones selectable from the device or panel

£66.13
ex VAT
£79.36 inc VAT
Add to quote
PS340

10 X IP 21 SEAL(C 934) BRH/BRS/BGL

£20.03
ex VAT
£24.04 inc VAT
Add to quote
WRA-PC-I00

Body Colour - White

£72.36
ex VAT
£86.83 inc VAT
Add to quote
WRA-RC-I00

Body Colour - Red

£69.58
ex VAT
£83.50 inc VAT
Add to quote
WRL-PC-I00

Body Colour - White

£81.65
ex VAT
£97.98 inc VAT
Add to quote
WRL-RC-I00

Body Colour - Red

£81.93
ex VAT
£98.32 inc VAT
Add to quote
WSO-PP-I00

White, c/w isolator, Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.

£43.06
ex VAT
£51.67 inc VAT
Add to quote
WSO-PP-N00

White, no Isolator. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, Not isolated

£43.06
ex VAT
£51.67 inc VAT
Add to quote
WSO-PR-I00

Red c/w Isolation. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.

£49.04
ex VAT
£58.85 inc VAT
Add to quote
WSO-PR-N00

Red, no Isolator. Wall Sounder - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved.

£43.06
ex VAT
£51.67 inc VAT
Add to quote
WSS-PC-N00

Red Flash, Pure White Body, Clear Lens, non-Isolated. Wall Sounder Strobe - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with Visual Alarm Device (VAD), EN54-23 O class compliant (W-1.9-1.9).

£69.58
ex VAT
£83.50 inc VAT
Add to quote
WSS-PR-I00

Red Flash, Pure White Body, Red Lens c/w Isolation. Wall Sounder VID - Wall-mounted, addressable, loop-powered sounder, EN54-3 approved, with visual indicating device (VID). This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire

£77.63
ex VAT
£93.16 inc VAT
Add to quote
WSS-PR-N00

Red Flash, Pure White Body, Red Lens, no Isolator. Wall Sounder - Addressable loop powered base sounder, EN54-3 approved, with visual indicating device (VID). This product is not approved to EN54-23 (Visual Alarm Device) and must not be used as a visual alarm device to provide a primary warning notification of fire.

£63.25
ex VAT
£75.90 inc VAT
Add to quote
WST-PC-N00

Red Flash, Pure White Body, Clear Lens, non-Isolated. Wall VAD - Wall mounted, addressable loop powered EN54-23 O class compliant (W-1.68-1.68).

£39.10
ex VAT
£46.92 inc VAT
Add to quote
WWA-PC-I00

Body Colour - White

£115.58
ex VAT
£138.70 inc VAT
Add to quote
WWA-RC-I00

Body Colour - Red

£116.62
ex VAT
£139.94 inc VAT
Add to quote
WWL-PC-I00

Body Colour - White

£81.65
ex VAT
£97.98 inc VAT
Add to quote
WWL-RC-I00

Body Colour - Red

£81.93
ex VAT
£98.32 inc VAT
Add to quote
6500E-26

Optical beam detector based on reflective technology. Supplied as a combined transmitter/receiver unit with a reflector. Suitable for distances from 10m to 70m.

£730.16
ex VAT
£876.19 inc VAT
Add to quote
22051E-26

Low profile Optical Smoke Sensor, no Isolator - White. Requires B501AP base

£31.27
ex VAT
£37.52 inc VAT
Add to quote
22051EI-26

Low profile OpticalSmoke Sensor c/w Isolator - White. Requires B501AP base

£34.68
ex VAT
£41.62 inc VAT
Add to quote
22051TE-26

Multi-sensor combined optical smoke sensor and thermal sensor in a single housing, no Isolator - White, Requires B501AP base

£40.66
ex VAT
£48.79 inc VAT
Add to quote
22051TEI-26

Multi-sensor combined optical smoke sensor and thermal sensor c/w Isolator in a single housing, - White, Requires B501AP base

£39.47
ex VAT
£47.36 inc VAT
Add to quote
22051TLE-26

Smoke/Thermal/IR Sensor, no Isolator - White

£71.76
ex VAT
£86.11 inc VAT
Add to quote
22051TLEI-26

Smoke/Thermal/IR Sensor c/w Isolator - White

£86.72
ex VAT
£104.06 inc VAT
Add to quote
52051E-26

Heat sensor. 58 °C, no Isolator - White. Type A1R. Requires B501AP, base

£32.90
ex VAT
£39.48 inc VAT
Add to quote
52051EI-26

Heat sensor. 58 °C and Rate of Rise c/w Isolator - White. Type A1R. Requires B501AP base

£38.88
ex VAT
£46.66 inc VAT
Add to quote
52051HTE-26

Heat high temperature sensor, 78 °C, no Isolator - White. Type BS. Requires B501AP base

£46.05
ex VAT
£55.26 inc VAT
Add to quote
52051RE-26

Heat sensor. 58 °C and Rate of Rise, no Isolator - White. Type A1R. Requires B501AP base

£34.68
ex VAT
£41.62 inc VAT
Add to quote
B501AP

Analogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label. PURE WHITE

£2.87
ex VAT
£3.44 inc VAT
Add to quote
B524IEFT-1

Deep analogue sensor base with built in FET isolator, with SEMS screw connections and address identification label

£27.45
ex VAT
£32.94 inc VAT
Add to quote
BPW

Addressable deep base for detector and AV. Pure White Body

£9.21
ex VAT
£11.05 inc VAT
Add to quote
BRR

Addressable deep base for detector and AV. Red

£8.31
ex VAT
£9.97 inc VAT
Add to quote
IBS-LIDPW

Pure White cover plate for base sounders. Pack of 10

£38.27
ex VAT
£45.92 inc VAT
Add to quote
RMK400AP

Recess mounting kit suitable for flush mounting bases into a false ceiling

£18.42
ex VAT
£22.10 inc VAT
Add to quote
WB-1AP

Wet base shroud for use with standard bases to allow condensation run off and rear seal. Conduit entry only. Pure White Body

£22.07
ex VAT
£26.48 inc VAT
Add to quote
WPW

Addressable sealed deep base for detector and AV. Pure White Body

£15.37
ex VAT
£18.44 inc VAT
Add to quote
WRR

Addressable sealed deep base for detector and AV. Red

£14.59
ex VAT
£17.51 inc VAT
Add to quote
DNRE

Duct detector housing complete with B501AP base for Addressable MI-PSE-S2 or MI-PSE-S2I detectors. (Detector not supplied). Requires DSTXX duct sampling tube and MI-PSE-S2 or MI-PSE-S2I detectors.

£182.99
ex VAT
£219.59 inc VAT
Add to quote
797-065

Multi-Mount Enclosure. Metal, Morley light grey

£185.38
ex VAT
£222.46 inc VAT
Add to quote
CMX-10RME

10-way relay control (output) card (unboxed PCB.) contact rating 30 Vdc, 1 A. Complete with individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's

£558.53
ex VAT
£670.24 inc VAT
Add to quote
CR-6EA

six way changeover relay output with built-in loop isolation. Complete with rotary address switch and plug-in terminal blocks. Requires M200-SMB-MM for mounting

£440.73
ex VAT
£528.88 inc VAT
Add to quote
DRM-1

BS7273 Door Release Module, additional failsafe to be used in conjunction with Morley-IAS output modules to provide a compliant solution to BS7273-4 Category A requirements. Powered from the 12-24v door magnet supply

£139.93
ex VAT
£167.92 inc VAT
Add to quote
IM-10EA

Ten input monitor module to provide an interface to a normally open contact devices such as plant outputs or flow switches. Requires back box 797-065

£506.51
ex VAT
£607.81 inc VAT
Add to quote
M200E-DIN

DIN rail mounting clip for M2xx series modules

£5.80
ex VAT
£6.96 inc VAT
Add to quote
M200SMB

Deep Module enclosure

£15.19
ex VAT
£18.23 inc VAT
Add to quote
M200XE

Loop isolation module. Requires M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails

£51.43
ex VAT
£61.72 inc VAT
Add to quote
M201EA

SINGLE OUTPUT MODULE - SYSTEM SENSOR

£60.40
ex VAT
£72.48 inc VAT
Add to quote
M201EA-240

Output control module System Sensor Protocol.

£87.91
ex VAT
£105.49 inc VAT
Add to quote
M210EA

SINGLE INPUT MODULE - SYSTEM SENSOR

£57.41
ex VAT
£68.89 inc VAT
Add to quote
M210EA-CZ

Analogue addressable monitor module for supervision of a conventional zone equipped with capacitive EOL element

£104.05
ex VAT
£124.86 inc VAT
Add to quote
M210EA-CZR

Analogue addressable monitor module for supervision of a conventional zone equipped with EOL resistor

£105.85
ex VAT
£127.02 inc VAT
Add to quote
M220EA

DUAL INPUT MODULE - SYSTEM SENSOR

£80.13
ex VAT
£96.16 inc VAT
Add to quote
M221EA

2 INPUT, 1 OUT MODULE - SYSTEM SENSOR

£119.01
ex VAT
£142.81 inc VAT
Add to quote
M501MEA

Addressable "mini" input module. It will interface with contact devices such as security contacts and waterflow switches, suitable for mounting inside monitored equipment

£55.02
ex VAT
£66.02 inc VAT
Add to quote
MCX-55ME

5-way Addressable monitor (input) & 5 way relay control (output) card (unboxed) complete with end of line resistors, individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's. Requires back box 797-065

£575.28
ex VAT
£690.34 inc VAT
Add to quote
MMX-10ME

10 way Addressable monitor (input) card (unboxed) complete with end of line resistors, individual input disable switches, plug in screw connections and on board LED's with the facility for external LED's.

£486.77
ex VAT
£584.12 inc VAT
Add to quote
SMB6-V0

Surface mount box for up to 6 M2xx modules

£40.07
ex VAT
£48.08 inc VAT
Add to quote
SMB500

Surface Mount Module Box. Plastic, not suitable for M7xx modules

£36.48
ex VAT
£43.78 inc VAT
Add to quote
SSE-DRS-1

BS7273 Door Release system. Comprising DRM-1 door release module and M201 single output model prewired and mounted in SMB6-V0 surface mount box. Used provide a compliant solution to BS7273-4 Category A requirements. Powered from the 12-24v door magnet supply. System Sensor protocol

£202.73
ex VAT
£243.28 inc VAT
Add to quote
M5A-RP01FF-K013-01

Addressable manual call point no Isolator. Flexible element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP01FF-01)

£34.68
ex VAT
£41.62 inc VAT
Add to quote
M5A-RP01FG-K013-01

Addressable manual call point no Isolator. Glass element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP01FG-01)

£34.68
ex VAT
£41.62 inc VAT
Add to quote
M5A-RP02FF-K013-01

Addressable manual call point c/w Isolator. Flexible element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting (Old PN: MCP5A-RP02FF-01)

£37.08
ex VAT
£44.50 inc VAT
Add to quote
M5A-RP02FG-K013-01

Addressable manual call point c/w Isolator. Glass element included. Requires PS031W for surface mounting or a single gang backbox for flush mounting.

£58.60
ex VAT
£70.32 inc VAT
Add to quote
TB011

Flush mounting terminal tray for KAC units (Old PN: ETT-P)

£9.03
ex VAT
£10.84 inc VAT
Add to quote
W5A-RP01SG-K013-01

Addressable waterproof call point, no Isolator, IP 67 (Old PN: WCP5A-RP01SG-01)

£123.19
ex VAT
£147.83 inc VAT
Add to quote
W5A-RP02SG-K013-01

Addressable waterproof call point c/w Isolator, IP 67 (Old PN: WCP5A-RP02SG-01)

£124.99
ex VAT
£149.99 inc VAT
Add to quote